Merkava Mk.3D (USA)

This page is about the American medium tank Merkava Mk.3D (USA). For other versions, see Merkava (Family).

▃Merkava Mk.3D

▃Merkava Mk.3D

USA

VII Rank

Battle rating:

AB	RB	SB
11.0	11.0	11.0

Class:

Medium tank

Purchase:Bundle or Gift

Show in game

MARKET

Description

The Merkava Mark 3D is the third and last subvariant of the Merkava Mark 3, which is the third variant of the Merkava main battle tank family. The tank, also known as the Merkava 3 Dor-Dalet (Hebrew for "Fourth Generation"), was enhanced by adding fourth-generation modular composite armour to the turret sides. These sloped modules also function as spaced armour, providing greater protection in urban settings. The Dor-Dalet modular composite armour is extremely similar to the Merkava Mark 4 variant and provides significantly more protection than the traditional Merkava Mark 3 variant. The Merkava Mark 3D also came with a new commander's independent sight, giving the Merkava Mark 3D significantly greater hunter-killer capability. The tracks were additionally strengthened with a new version supplied by CAT. The Merkava Mk 3D was first used by the Israeli Defense Force (IDF) in 2000.

Introduced in Update "Raining Fire" as a reward for the 2020 Wargame "Strategist" event, the Merkava Mark 3D is the Merkava Mark 3's last subvariant, with superior Dor-Dalet modular composite armour. This greatly enhanced the Merkava Mark 3D's turret protection, putting it up to par with the Merkava Mark 4 variant. The Merkava Mark 3D, as the final and ultimate subvariant of the Merkava Mark 3, has exceptional post-penetration survivability. Since the crew members are spaced out and no ammunition is stored in the turret, it is difficult to destroy the Merkava Mark 3D in a single shot, especially in hull-down situations. Surviving against anti-tank guided missiles (ATGMs) is also significantly easier, thanks to the Dor-Dalet modular composite armour's unusual design, which acts as both spaced and composite armour at the same time.

General info

Survivability and armour

Smoke grenades

Creation of a smoke screen in front of the vehicle

ESS

Creation of a smoke screen in the direction of movement of the vehicle

LWS

Notifies about the vehicle's exposure to laser emissions

Armourfront / side / back

Hull90 / 50 / 30

Turret150 / 65 / 65

Crew4 people

Visibility107 %

Armour type:

• Cast homogeneous armour (Hull, turret)
• Rolled homogeneous armour (Sides)
• Composite screens* (Turret front, hull front left, sideskirts)
  • with NERA elements**

Armour	Front (Slope angle)	Sides	Rear	Roof
Hull	60** mm (78-90°), 60 mm (66-73°) (+ 30* mm (74°) left) Upper glacis 90 mm (36°), 50 mm (59°) + 20 mm (60°) Lower glacis	50 mm (12°) + 15 mm	30 mm (0-39°)	20 mm
Turret	170 mm + 40* mm (0-68°) Turret cheeks 30-400 mm (0-78°) + 100 mm Gun mantlet 40 mm (68-81°) + 50* mm (78°) Upper	60 mm + 5 mm (0-60°)	40 mm	40 mm Front 20 mm Rear
Armour	Roof
Cupola	30 mm
Effective protection	Front
Turret	Turret front: 200 mm Kinetic 1,500 mm Chemical

Notes:

• Tracks are 30 mm thick
• Road wheels are 20 mm thick

The Merkava's armour does not quite live up to its aggressive appearance. The turret combines extreme angles with some composite armour and is capable of bouncing or absorbing incoming HEATFS rounds with some luck. Its protection against kinetic rounds is poor: the common 105 mm DM23 round is capable of penetrating large swathes of the frontal turret and will only struggle somewhat against the left turret cheek (right from an attacker's perspective) due to the overlapping armour segments and extreme angles. The hull has a similar combination of decent chemical protection and poor kinetic protection. 120 mm or 125 mm APFSDS as commonly used by German and Soviet tanks will typically have no issues penetrating the Merkava anywhere.

The Merkava does better in terms of post-penetration survivability. It is hard to destroy the Merkava in a single shot since the tank is rather roomy inside and the crew members are spread out. No ammunition is stored in the turret, so frontal turret penetrations are usually not fatal. Penetrating shots to the hull can sometimes be absorbed by the engine and transmission, but not always. There are fuel tanks on the upper hull sides and spaced armour in the rear that offer some chemical protection, but not enough to stop any tank cannons at the Merkava Mk.3D's rank.

Mobility

Speedforward / back

AB67 / 29 km/h

RB and SB60 / 26 km/h

Number of gears8 forward

4 back

Weight65.0 t

Engine power

AB2 290 hp

RB and SB1 200 hp

Power-to-weight ratio

AB35.2 hp/t

RB and SB18.5 hp/t

Game Mode	Max Speed (km/h)		Weight (tons)	Engine power (horsepower)		Power-to-weight ratio (hp/ton)
	Forward	Reverse		Stock	Upgraded	Stock	Upgraded
Arcade	67	29	65	1,860	2,290	28.62	35.23
Realistic	60	26		1,061	1,200	16.32	18.46

Modifications and economy

Repair costBasic → Reference

AB3 817 → 6 645

RB3 755 → 6 537

SB4 416 → 7 688

Total cost of modifications242 000

411 000

Talisman cost2 900

Crew training240 000

Experts830 000

Aces2 100

Research Aces1 140 000

Reward for battleAB / RB / SB

150 / 200 / 230 %

238 / 238 / 238 %

Modifications

Mobility	Protection	Firepower
Tracks Research: 18 000 Cost: 28 000 490 Suspension Research: 12 000 Cost: 19 000 330 Brake System Research: 12 000 Cost: 19 000 330 Filters Research: 13 000 Cost: 20 000 350 Transmission Research: 14 000 Cost: 22 000 380 Engine Research: 14 000 Cost: 22 000 380	Improved Parts Research: 5 400 Cost: 28 000 490 Improved FPE Research: 3 600 Cost: 19 000 330 Crew Replenishment Research: 13 000 Cost: 20 000 350 Mine protection Research: 13 000 Cost: 20 000 350 ESS Research: 14 000 Cost: 22 000 380 Smoke grenade Research: 14 000 Cost: 22 000 380	Horizontal Drive Research: 18 000 Cost: 28 000 490 Adjustment of Fire Research: 12 000 Cost: 19 000 330 120mm_NATO_APDS_FS_ammo_pack Research: 12 000 Cost: 19 000 330 Elevation Mechanism Research: 13 000 Cost: 20 000 350 LWS/LR Research: 13 000 Cost: 20 000 350 Artillery Support Research: 14 000 Cost: 22 000 380 NVD Research: 14 000 Cost: 22 000 380

A tip for grinding it:

Unlock parts first, horizontal drive, FPE, Adjustment of fire then M322. Everything after these can be unlocked after.

The M322 round offers up to 625 mm of penetration, it is able to penetrate most tanks at distance with ease allowing for other parts to be unlocked faster.

Armaments

Laser rangefinder

Reduces the error and increases the maximum measurable distance of the rangefinder

Night vision device

Improves visibility by enhancing natural light or active illumination.

Thermal imager

Allows to see thermal radiation in the infrared range day and night

Main armament

120 mm IMI MG251 cannon

Two-plane stabilizer

Reduces the swing of the gun in two planes while moving

Ammunition46 rounds

First-order5 rounds

Reloadbasic crew → aces

7.8 → 6.0 s

Vertical guidance-7° / 20°

120 mm IMI MG251					Turret rotation speed (°/s)					Reloading rate (seconds)
Mode	Capacity	Vertical	Horizontal	Stabilizer	Stock	Upgraded	Full	Expert	Aced	Stock	Full	Expert	Aced
Arcade	46	-7°/+20°	±180°	Two-plane	32.4	44.8	54.4	60.2	64.0	8.71	7.70	7.10	6.70
Realistic					20.2	23.8	28.9	32.0	34.0

Ammunition

Penetration statistics
Ammunition	Type of warhead	Penetration @ 0° Angle of Attack (mm)
		10 m	100 m	500 m	1,000 m	1,500 m	2,000 m
M325	HEATFS	480	480	480	480	480	480
M339	HE-TF	65	65	60	58	53	50
M322	APFSDS	589	586	577	565	553	541

Shell details
Ammunition	Type of warhead	Velocity (m/s)	Projectile mass (kg)	Fuse delay (m)	Fuse sensitivity (mm)	Explosive mass (TNT equivalent) (kg)	Ricochet
							0%	50%	100%
M325	HEATFS	1,078	15.81	0.05	0.1	2.36	65°	72°	77°
M339	HE-TF	900	17	1.5	3	3.66	79°	80°	81°
M322	APFSDS	1,705	5.6	-	-	-	78°	80°	81°

The stock M325 HEATFS is a High-Explosive Anti-Tank Fin-Stabilised round, with a velocity of 1,078 m/s and a TNT equivalent of 2.36 kg. This round provides a maximum penetration of 480 mm at all ranges, which is the standard for 120 mm HEATFS. To get the best from this round, you must aim for weakly armoured places on the enemy tank, generally the weakest places are the sides and rear of the enemy tank. At rank seven, most MBTs are heavily armoured with ERA plates or composite armour which can defeat chemical munitions with ease. It works quite nicely against light targets such as SPAAs since the explosive content can cause overpressure damage.

The also stock M339 HE-TF round is a High-Explosive Timed Fused round, with a velocity of 900 m/s and a TNT equivalent of 3.66 kg. It is unique among HE rounds for having a fuse delay of 1.5 m instead of exploding on impact. This means it behaves more like a SAP or APHE round, being capable of penetrating a target and exploding inside. A successful penetration in this manner will almost invariably wipe out the target. The maximum penetration of the round is given as 65 mm, but this is the armour thickness the round itself is capable of penetrating. The penetration of the explosive shrapnel is around 37 mm, a less impressive figure. Setting the distance fuse is accomplished by using the rangefinder. It is technically possible to use this airburst feature against ground targets hiding behind cover, but this is unlikely to amount to much against vehicles with more than paper-thin armour. The HE-TF round is the most useful for either destroying lightly armoured vehicles or alternatively for attacking helicopters that stray too close to the battlefield using the airburst function. In an emergency M339 can sometimes be used to attack the side armour or turret/hull roof armour of an enemy MBT but this should not be a first choice, considering that its penetration on impact is on the level of a reserve tank and its explosive content is less than Soviet or Chinese tanks.

The unlockable M322 APFSDS round is a Tier 3 upgrade and functionally identical to the CL3143 round used by the Italian Ariete. It one of the best rounds in the game, providing up to 589 mm of flat penetration at point blank and 340 mm of penetration at 60 degrees. Only top-tier tanks like the Leopard 2A5 can resist it in specific areas or angles. Against other opponents, it is very simple to point and click at crew members or ammo racks. Once unlocked, M322 should be the round of choice for the Merkava Mk.3D for anti-tank duties.

Ammo racks

Ammo racks of the Merkava Mk.3D (USA)

Full ammo	1st rack empty	2nd rack empty	3rd rack empty	4th rack empty	5th rack empty	Visual discrepancy
46	45 (+1)	43 (+3)	42 (+4)	6 (+40)	1 (+45)	No

Notes:

• Shells are modeled individually and disappear after having been shot or loaded.
• Rack n°5 is a ready rack containing 5 shells.
• This rack gets filled first when loading up the tank and is also emptied first.
• The depletion order at full capacity is: 5 - 1 - 2 up to 4.
• Simply not firing when the gun is loaded will move ammo from racks 1 to 4 into rack 5. Firing will interrupt the restocking of the ready rack.
• The double rack n°4 depletes row by row from top to bottom (starting with the right rack).

Machine guns

12.7 mm M2HB machine gun (coaxial)

Ammunition1 000 rounds

Belt capacity200 rounds

Reloadbasic crew → aces

10.4 → 8.0 s

Fire rate575 shots/min

7.62 mm FN MAG 60-40 machine gun (coaxial)

Ammunition6 000 rounds

Belt capacity200 rounds

Reloadbasic crew → aces

10.4 → 8.0 s

Fire rate1 001 shots/min

2 x 7.62 mm FN MAG 60-40 machine gun

Ammunition3 600 rounds

Belt capacity200 rounds

Reloadbasic crew → aces

10.4 → 8.0 s

Fire rate1 001 shots/min

Two-plane stabilizer

Reduces the swing of the gun in two planes while moving

Ammunition0 rounds

Reloadbasic crew → aces

0.0 → 0.0 s

12.7 mm M2HB
Mount	Capacity (Belt)	Fire rate	Vertical	Horizontal
Coaxial	1,000 (200)	577	N/A	N/A

7.62 mm FN MAG 60-40
Mount	Capacity (Belt)	Fire rate	Vertical	Horizontal
Coaxial	6,000 (200)	600	N/A	N/A
Commander's cupola	1,800 (200)	600	-10°/+50°	-120°/+60°
Loader's cupola	1,800 (200)	600	-10°/+50°	±120°

Usage in battles

The best trait of the Merkava Mk.3D is its spectacular firepower. It has a far more powerful gun than the contemporary IPM1 or M1 Abrams but lags behind these tanks in terms of armour protection and mobility. As such, the Merkava is best used in a second line support or sniping role where it is less likely to attract enemy fire and can instead focus on sending enemies back to the hangar with the M322 APFSDS. Find good positions that allow the Merkava to spot enemies early and retreat into cover if necessary. If the situation gets hot, the Merkava can also rely on its huge arsenal of smoke grenades to create its own cover. It is possible to smoke up entire portions of the map, potentially saving yourself or your teammates from helicopters or snipers.

How to combat enemy helicopters

The Merkava Mk.3D has four machine guns, one 12.7 mm mounted on the cannon, with an additional 7.62 mm machine gun mounted on each of the Commander's & Loader's cupola's and finally a coaxial 7.62 mm. This allows the Merkava to unleash a respectable torrent of lead at nearby aircraft. The Merkava Mk.3D is able to handle airborne threats extremely well; with its LWS/LR system, it alerts you to when someone is locking on with a laser range finder, which are installed in most if not all high ranking helicopters. The M339 HE-VT round is also useful against helicopters. It does not have the high muzzle velocity or automatic proximity fuse of the M1A2 Abrams's M830A1 HEATFS, but 3.7 kg of TNT equivalent will still do a number on a helicopter if it explodes nearby. Against moving helicopters it is important to fire the round soon after setting the fuse with the laser rangefinder.

When a LWS notification pops up, switch to gunner sight and enable the thermal sight, and look around in the sky and you will see brightly lit dot - if it is flying away from you, ignore it. If it is coming closer, keep an eye on it and wait until it is close enough for you to engage it.

However, if it has fired its ATGMs, pop smoke and retreat behind an object until its missile detonates. Then locate the helicopter and start slinging bullets and cannon shells its way. The former will not be useful at long distances but the latter might if the helicopter is not moving quickly. Helicopters closing in for strafing runs with cannons and unguided rockets can be downed quickly with the machine guns and airburst HE shells. Try to stay in cover when focused on the sky since enemy tanks are likely to notice the large number of machine gun tracers coming from the Merkava's position.

Capitalising on the terrain and environments

Urban maps and environments

When engaged in combat on a map which features an urban close range environment, the Merkava Mk.3D provides great threat to any enemy tanker. The manoeuvrability, is one of the best in the game, it is able to pivot on the spot and change course. If that is due to a sudden appearance of enemy tank which has appeared or if the strategic interest has changed, the MK.3D is able to handle it. To get the best out of the Mk.3D, either flank around the urban parts of the map or stay & utilise the compact urban environment.

To utilise the compact urban environment, stay close to buildings, use the buildings to your advantage. Using the buildings will allow you to dominate the battle zone, it's 120 mm cannon is able to destroy enemy tanks with ease, especially at close ranges. It is important not to stay in the middle the roads or open areas which offers no concealment. The Merkava Mk.3D, is a tall tank, it is taller than the M1 Abrams family of tanks This means, you can be seen and shot at by the enemy team, it is not a sleek low profile tank like the HSTV-L.

Rural maps and rural terrain

To capitalise on rural maps head into the forest, and stay in the forest it's important not to leave the forest or rural terrain like this. This type of terrain offers great protection and makes the Merkava Mk.3D almost invisible to the enemy. The thermal profile is reduced by the vegetation, which blocks the heat signature. It's very important to use the correct camouflage, which helps to make you harder to detect.

The Merkava Mk.3D 120 mm gun is able to snipe the enemy tanks from far and wide. to win do not keep firing from one spot, after every shot move to another location using the rural vegetation to make you stealthy and remain unseen. The MK.3D has a thermal sight, that allows you to find the enemy tanks in situations like this. The gunner sight also provides a zoom of 6 to 12x allowing for pin-point shots combined with the M322 round - makes for one of the most lethal tanks in the game.

Night Battles

Do not expose the right hand side of the tank, due to the exhaust gas which will make it impossible for you to locate and knockout enemy tankers with the thermal sight. Instead, keep the left hand side of the tank exposed towards the enemy frontline. It's also as important keep an eye out for air threats such as Ka-52, Mi-28N, EC-665 Tiger UHT, AH-64D and other helicopters.

Pros and cons

Pros:

• Has access to one of the best penetrating APFSDS round in the game
• Has access to timed HE, which can be set to detonate at a very specific distance, for example just behind enemy ammunition panel or above a light tank completely hidden behind cover
• Timed HE round has a less sensitive detonator than normal HE-type shells, so it can overcome common obstacles such as bushes and fences
• Great survivability, thanks to its internal layout
• Ammo storage is wrapped in a fire proof container, preventing it from detonating in-case of a fire, inside of the tank
• Great manoeuvrability, able to pivot and turn on a dime
• Certain redundant parts of the turret can be used as extra protection against chemical ammunition, or to bait shots from impatient opponents
• Turret armour can withstand direct hits from enemy tanks
• Engine & external fuel tank is able to prevent APFSDS from penetrating and knocking the tank out if shot at the front, head on

Cons:

• Not very fast, substandard power-to-weight
• Only has first generation gunner & thermals optics
• Hits to the upper half of the hull can bypass all the screens and modules and go straight for the ammo or crew as the engine is not tall enough to absorb the shot - attacks from high ground are particularly dangerous
• Due to the placement of the external fuel tank, which is placed in front of the engine. It absorbs the kinetic force of the round - Thus gets set on fire and blocks gunner view from the front with thick smoke
• Engine exhaust is placed on the right hand side of the tank, the exhaust gas limits the gunner view, since the gunner can only see exhaust gas when traveling
• In night battles, exhaust gas blocks out the right hand side of the vehicle from the gunner view
• Weak side and rear armour, well-placed shot here can knock the tank out
• Tall profile compared to other tanks in this tier

History

The Merkava Mk.3 was an improved model of the Merkava Mk.2 that was introduced in 1989 for the Israeli Defense Forces (IDF). It featured improvements in firepower, mobility, and electronics. It was in production from 1989 to 2003 and remains the most numerous tank in service with the IDF.

One of the most major changes was the change to the main armament. The 105 mm gun of the Mk.2 was replaced by a 120 mm gun produced by Israeli Military Industries (IMI) in Israel. The engine was also replaced by a more powerful 1,200 hp diesel engine. The turret was also heavily modified to allow target tracking independent of the hull's movements. Additionally, a two-way phone was added for communication between the tank crew and friendly infantry, the ammunition stowage was redesigned for more safety, and laser designators were added. The weight was increased to 65 tons, but the more powerful engine increased the maximum speed to 60 km/h.

The Merkava Mk.3 Baz was an improved model that was introduced in 1995. It featured a nuclear, biological, chemical (NBC) protection system, an air-conditioning unit, and an upgraded fire control system (FCS).

The Merkava Mk.3D was a further improvement that added modular composite armour on both the chassis and turret, visually most notable on the turret.

Devblog

Immediately after production of the Merkava Mk.2 began in 1983, Israeli engineers began working on the new Mk.3 version of the MBT. The Merkava Mk.3 introduced significant improvements over preceding variants in almost all aspects. Primarily however, the focus of the upgrades was centered around improving protection - by adding additional armour to the hull - as well as mounting the newly developed IMI MG251 120 mm smoothbore cannon, purpose-built for the new modification of the Merkava, in order to increase firepower.

Production of the Merkava Mk.3 began in the late 1980s, with the first vehicles reaching troops in December 1989. The Merkava Mk.3 remained in production until 2003 by which time around 650 vehicles were built. Thus, the Merkava Mk.3 belongs to the spearhead of Israel's armoured units in the present day.

Media

Skins

• Skins and camouflages for the Merkava Mk.3D (USA) from live.warthunder.com.

Images

• Merkava Mk.3D Devblog Images
• 
• 
• 
• 
• 
• 

Videos

Holding The Line - Merkava Mk.3D (USA) - DEFYN

Merkava Mk.3D (USA) Tank Review - Napalmratte

The Shooting Range #219 - Metal Beasts section at 00:28 discusses the Merkava Mk.3D (USA).

Should You Grind The Merkava Mk.3D (USA)? - Sako Sniper

Merkava Mk.3D (USA) - The Iron Chariot Ft. M322 - JustinPlaysYT

See also

Links to the articles on the War Thunder Wiki that you think will be useful for the reader, for example:

• reference to the series of the vehicles;
• links to approximate analogues of other nations and research trees.

External links

• [Devblog] Crafting event "Strategist": Merkava Mk.3D
• [Wikipedia] Merkava Mark III