Difference between revisions of "Challenger Mk.2"
Easy_Eight (talk | contribs) m (→Pros and cons) (Tag: Visual edit) |
(→Pros and cons) |
||
| Line 215: | Line 215: | ||
* Good APFSDS shells | * Good APFSDS shells | ||
* Good forward and reverse speed | * Good forward and reverse speed | ||
| − | * Great hull down performance, especially at range | + | * Great hull down performance, especially at range |
* No stock HEAT-FS shells, making the stock grind easier | * No stock HEAT-FS shells, making the stock grind easier | ||
| − | * One of the few | + | * One of the few MBTs that has access to a smoke shell that can be fired by the main gun |
| − | * Reload can get down to 5 seconds, fastest firing 120 mm along with [[Type 90]]/[[Type 90 (B)]] | + | * Reload can get down to 5 seconds, fastest firing 120 mm along with [[Type 90]]/[[Type 90 (B)]] |
'''Cons:''' | '''Cons:''' | ||
| − | * | + | * Only 4 rounds of first-stage ammunition, once depleted it can take up to 8.7 seconds to reload the gun |
* Large and tall target | * Large and tall target | ||
* Driver's optics weakspot on the upper frontal plate | * Driver's optics weakspot on the upper frontal plate | ||
* No composite armour on lower glacis plate and rear of the turret | * No composite armour on lower glacis plate and rear of the turret | ||
| − | * HESH shell largely useless against other | + | * HESH shell is largely useless against other MBTs, but it can work against lightly armoured vehicles |
* Hull armour is rather thin | * Hull armour is rather thin | ||
* Ammunition takes a lot of space (easy to hit) | * Ammunition takes a lot of space (easy to hit) | ||
| − | * Penetration figures for the L23 and L23A1 are not very impressive compared to Soviet | + | * Penetration figures for the L23 and L23A1 are not very impressive compared to Soviet 125 mm APFSDS |
== History == | == History == | ||
Revision as of 15:33, 25 January 2021
| This page is about the British medium tank Challenger Mk.2. For other uses, see Challenger (Disambiguation). |
Contents
Description
The Tank, Combat, 120-mm Gun, Challenger Mk.2, or just Challenger Mk.2, is a rank VII British medium tank with a battle rating of 10.3 (AB/RB/SB). It was introduced in Update 1.77 "Advancing Storm".
General info
Survivability and armour
Like the Chieftain Mk 10, the Challenger has a very strong turret front, with composite armour protecting the entire front and part of the sides. The turret front can resist up to 470 mm of rolled homogenous armour equivalency (RHAe) against long-rod kinetic (~550 mm RHAe against rounds without the long-rod slope modifier) and up to 600 mm against chemical penetrators. This theoretically makes the strongest part of the turret frontally invulnerable to all top-rank kinetic ammunition in the game. In practice, however, there is a weak spot on the lower leading edge of the turret front, where the backing plate of the composite inside the turret flattens to a 90° angle. This reduces the effective thickness of the lower turret cheeks by approximately 100 mm, making it vulnerable to most long-rod APFSDS. A small portion of the turret front, the area just around the gun, is unprotected by composite armour and is 200 mm of CHA with a 50 mm RHA spall liner. This area extends above the gun and transitions to 60mm CHA at 60°. While these areas are small and unlikely to lead to catastrophic damage when hit (the gun breech will tend to soak up shrapnel), they are important to be wary of.
The Challenger's turret sides are similar to many top-rank MBTs - they can only resist enemy fire at relatively high angles of attack. Protection is 140 mm RHAe against kinetic and 300 mm RHAe against chemical shells, meaning that the armour can only resist autocannon fire and low-calibre HEAT when struck dead-on.
Compared its turret, the Challenger hull is significantly weaker against kinetic projectiles with only 220 mm of RHAe (~300 mm for projectiles without the long-rod slope modifier) on the UFP. Chemical protection in this area is similar to the turret at 600 mm RHAe. An exception to these numbers is the area directly above the driver's hatch, which is not covered by composite armour and is vulnerable to essentially any anti-tank ammunition. The lower frontal plate is also lacking composite and is comprised of a single 70 mm RHA plate at a slight angle, providing ~80-90 mm of effective thickness. Shots to the LFP will at least incapacitate the driver, or more likely catastrophically detonate the hull ammunition. British tankers should be quite used to this weakspot by this point, as the weak LFP is present on the entire Chieftain line. However, the upper third of the LFP shares some of the UFP's composite protection due to its design. This means that the upper third of the LFP has slightly more protection than the lower sections.
Hull sides are generally very weak, as is typical of top-rank MBTs. The upper hull (above the tracks) is comprised of a 20 mm RHA + fuel tanks + 25 mm RHA array. The lower hull (around the tracks) is comprised of 19 mm aluminium side skirts and 34 mm RHA.
Armour type:
- Composite armour (hull UFP, turret front and sides)
- Rolled homogeneous armour (hull)
- Cast homogeneous armour (gun "mantlet")
- Aluminium (side skirts)
| Armour | Front (Slope angle) | Sides | Rear | Roof |
|---|---|---|---|---|
| Hull | 38-50* mm (60-81°) Front glacis 70 mm (30°) Lower glacis |
20 mm (0-3°), 25 mm (74°) Top 34 + 19 mm Bottom |
20 mm (29°) Top 25 mm (30°) |
20 mm 8 mm Engine grille |
| Turret | 50* mm (51-54°) 60 mm (55-56°), 200 mm Gun mantlet |
25* + 4 mm (1°) Front 45 + 4 mm Rear |
44 + 4 mm (43-48°) 20 mm (85°) Turret underside |
38 mm Front 20 mm Rear |
| Armour | Sides | Roof | ||
| Cupola | 60 mm | 60 mm | ||
| Composite armour* | Front | Sides | Rear | Roof |
| Hull | Front glacis: ~220 mm @ 60° against Kinetic ~600 mm @ 60° against Chemical |
N/A | N/A | N/A |
| Turret | Turret front: ~500 mm @ 60° against Kinetic ~600 mm @ 60° against Chemical |
25 mm sections: ~ 140 mm @ 0° against Kinetic ~ 300 mm @ 0° against Chemical |
N/A | N/A |
Notes:
- Suspension wheels, torsion bars, and tracks are 20 mm thick.
- Turret ring is 60 mm thick.
- 20-25 mm RHA plates surround the fuel tanks on the hull sides.
- Hull composite armour configuration is 50 mm RHA + 200 mm NERA elements + 80 mm RHA.
- Front turret composite armour configuration is 50 mm RHA + 600 mm NERA elements + 110 mm RHA.
- Turret side composite armour configuration is 25 mm RHA + 300 mm NERA elements + 80 mm RHA.
Mobility
| Game Mode | Max Speed (km/h) | Weight (tons) | Engine power (horsepower) | Power-to-weight ratio (hp/ton) | |||
|---|---|---|---|---|---|---|---|
| Forward | Reverse | Stock | Upgraded | Stock | Upgraded | ||
| Arcade | 62 | 41 | 62.5 | 1,860 | 2,322 | 29.76 | 37.15 |
| Realistic | 56 | 37 | 1,061 | 1,217 | 16.98 | 19.47 | |
The Challenger Mk.2's speed sets it apart from the previous Chieftain tanks, as it is capable of reaching 56 km/h on roads and 46 km/h off-road. Reverse speed is also a noticeable improvement from the Chieftain line. Despite this, the 62 ton mass of this vehicle makes it the slowest of its high-rank contemporaries (e.g. Abrams, Leopard, and Type 90).
Modifications and economy
| Mobility | Protection | Firepower | ||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
|
The FPE module should be a priority, since the fuel tanks are located all around the hull above the tracks, meaning that the tank will be set on fire often. This comes with added protection, however, as the fuel tanks will frequently absorb most shrapnel - protecting the crew and ammunition from the occasional side-shot - giving the player ample time to return fire and eliminate the threat.
Armaments
Main armament
The Challenger bears the 120 mm L11A5, an updated but essentially identical version of the gun found on the Chieftains. It has access to the same rounds as the Chieftain Mk 10, with the notable addition of the L23A1 APFSDS ammunition. L23A1 penetrates angled armour much more efficiently than its predecessor L23, making it especially useful for dealing with Russian late T-series hulls.
| 120 mm L11A5 | Turret rotation speed (°/s) | Reloading rate (seconds) | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Mode | Capacity | Vertical | Horizontal | Stabilizer | Stock | Upgraded | Full | Expert | Aced | Stock | Full | Expert | Aced |
| Arcade | 52 | -10°/+20° | ±180° | Two-plane | 29.50 | __.__ | __.__ | __.__ | __.__ | 8.70 | _.__ | _.__ | _.__ |
| Realistic | 18.40 | __.__ | __.__ | __.__ | __.__ | ||||||||
Ammunition
| Penetration statistics | |||||||
|---|---|---|---|---|---|---|---|
| Ammunition | Type of warhead |
Penetration @ 0° Angle of Attack (mm) | |||||
| 10 m | 100 m | 500 m | 1,000 m | 1,500 m | 2,000 m | ||
| Shot L23 | APFSDS | 410 | 408 | 405 | 400 | 390 | 380 |
| Shell L31A7 | HESH | 152 | 152 | 152 | 152 | 152 | 152 |
| Shot L23A1 | APFSDS | 396 | 394 | 387 | 376 | 367 | 357 |
| Shell details | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Ammunition | Type of warhead |
Velocity (m/s) |
Projectile Mass (kg) |
Fuse delay (m) |
Fuse sensitivity (mm) |
Explosive Mass (TNT equivalent) (g) |
Ricochet | ||
| 0% | 50% | 100% | |||||||
| Shot L23 | APFSDS | 1,535 | 3.89 | N/A | N/A | N/A | 76° | 77° | 80° |
| Shell L31A7 | HESH | 670 | 17.1 | 0.4 | 0.1 | 6,560 | 73° | 77° | 80° |
| Shot L23A1 | APFSDS | 1,535 | 3.89 | N/A | N/A | N/A | 78° | 80° | 81° |
| Smoke shell characteristics | ||||||
|---|---|---|---|---|---|---|
| Ammunition | Velocity (m/s) |
Projectile Mass (kg) |
Screen radius (m) |
Screen deploy time (s) |
Screen hold time (s) |
Explosive Mass (TNT equivalent) (g) |
| L34 | 670 | 17.1 | 20 | 5 | 25 | 50 |
Ammo racks
| Full ammo |
1st rack empty |
2nd rack empty |
3rd rack empty |
4th rack empty |
5th rack empty |
6th rack empty |
Visual discrepancy |
|---|---|---|---|---|---|---|---|
| 52 | __ (+__) | __ (+__) | __ (+__) | __ (+__) | __ (+__) | __ (+__) | __ |
Machine guns
| 7.62 mm L37A2 | ||||
|---|---|---|---|---|
| Mount | Capacity (Belt) | Fire rate | Vertical | Horizontal |
| Pintle | 3,600 (100) | 650 | -10°/+50° | ±120° |
| 7.62 mm L8A2 | ||||
|---|---|---|---|---|
| Mount | Capacity (Belt) | Fire rate | Vertical | Horizontal |
| Coaxial | 2,400 (200) | 600 | N/A | N/A |
Usage in battles
New drivers of the Challenger 1 will appreciate a similar play style to the earlier Chieftain tanks, particularly the Chieftain Mk 10. Most of the armour's weakpoints could be minimized by assuming a hull-down position on the incline of a hill, and using the Challenger's excellent -10° of gun depression to keep the gun on target. This will increase the angle of the turret and thus increase the effective thickness of the back-plate on the turret.
When encountering common enemies:
- T-64B: L23A1 APFSDS can theoretically penetrate the UFP, but it is difficult. The drivers port weakspot is the recommended target from the front. If not possible, aim for the breech/cannon barrel to eliminate the threat of return fire
- T-64A (1971): APFSDS will go right through the front of this tank, but the Challenger can still be penetrated by the top APFSDS (3BM12) in the weak spot on the turret's leading edge.
- Leopard 2K: Probably the most dangerous opponent, as its APFSDS can go right through the upper front plate and parts of the turret. Shoot anywhere but the front of the turret, unless trying to take out the Leo's cannon barrel.
- Leopard A1A1: Its APFSDS poses a risk to the weakspot on the turret, but only if it gets the first shot off. Shoot anywhere.
Pros and cons
Pros:
- Good composite armour for both kinetic and chemical protection for both hull and turret
- Very accurate main gun with good gun stabilizers and decent stock APFSDS shell
- Decent mobility for its weight and size
- Good APFSDS shells
- Good forward and reverse speed
- Great hull down performance, especially at range
- No stock HEAT-FS shells, making the stock grind easier
- One of the few MBTs that has access to a smoke shell that can be fired by the main gun
- Reload can get down to 5 seconds, fastest firing 120 mm along with Type 90/Type 90 (B)
Cons:
- Only 4 rounds of first-stage ammunition, once depleted it can take up to 8.7 seconds to reload the gun
- Large and tall target
- Driver's optics weakspot on the upper frontal plate
- No composite armour on lower glacis plate and rear of the turret
- HESH shell is largely useless against other MBTs, but it can work against lightly armoured vehicles
- Hull armour is rather thin
- Ammunition takes a lot of space (easy to hit)
- Penetration figures for the L23 and L23A1 are not very impressive compared to Soviet 125 mm APFSDS
History
In 1977, the Iranian government ordered an improved version of the Chieftain tank, which was arguably the best main battle tank (MBT) in service at its time. The Chieftain offered unparalleled protection and firepower; however, its mobility was lackluster and something its successor needed to improve upon. In response, the engineers at the MVEE created the Chieftain Mk.5(P), from which three additional prototypes were created. It was one of these prototypes that would become the basis for the Challenger 1. Unfortunately, after the Iranian Revolution of 1979 and the fall of the Shah, Iran canceled its order for an improved Chieftain. In addition, a parallel British tank project (the MBT90) was also abandoned, and the British Army quickly became a new potential customer for a new MBT.
The Challenger's design was based on the cancelled project called "Shir-2"" planned for export to Iran, and retained its deadly 120mm gun and superb armour. The Challenger was also equipped with Chobham armour, a composite armour made from multiple layers of different materials. The additional materials gave the Challenger its distinctive, heavily-sloped armour on the front of the turret and upper glacis. The Challenger's mobility and off-road capabilities were significantly improved with the installation of a new 1,200 horsepower Rolls-Royce engine and hydropneumatic suspension. The Challenger 1 entered production and service in 1983. Production ended in 1990, having yielded a total of about 420 vehicles. It served primarily with British forces during the Gulf War. It was also used in peacekeeping missions in Bosnia-Herzegovina during the mid 1990s, and Jordan still operates a number of Challenger 1 tanks to this day. The Challenger 1 was withdrawn from active service by 2001 and later replaced by the Challenger 2.
- From Devblog
Media
See also
Links to the articles on the War Thunder Wiki that you think will be useful for the reader, for example:
- reference to the series of the vehicles;
- links to approximate analogues of other nations and research trees.
External links
| Britain medium tanks | |
|---|---|
| Valentine | Valentine I · Valentine IX · Valentine XI |
| Cromwell | Cromwell I · Cromwell V · Cromwell V (RP-3) |
| Cromwell derivatives | Challenger · Avenger · Comet I · Comet I "Iron Duke IV" · Charioteer Mk VII |
| Centurion | Centurion Mk 1 · Centurion Mk.2 · Centurion Mk 3 · Centurion Mk.5 AVRE · Centurion Mk 10 · Centurion Action X · FV4202 |
| Vickers MBT | Vickers Mk.1 · Vickers Mk.3 · Vickers Mk.7 |
| Chieftain | Chieftain Mk 3 · Chieftain Mk 5 · Chieftain Mk 10 |
| Challenger 1 | Challenger Mk.2 · Challenger Mk.3 · Challenger DS |
| Challenger 2 | Challenger 2 · Challenger 2 (2F) · Challenger 2 TES · Challenger 2 OES · Challenger 2E · Challenger 2 Black Night |
| Challenger 3 | Challenger 3 TD |
| Australia | A.C.I · A.C.IV · Centurion Mk.5/1 |
| South Africa | Olifant Mk.1A · Olifant Mk.2 · TTD |
| India | Vijayanta · Bhishma TWMP |
| Israel | ▄Sho't Kal Dalet |
| Jordan | Khalid |
| Sweden | ▄Strv 81 (RB 52) |
| USA | Grant I · Sherman II · Sherman Firefly · Sherman IC "Trzyniec" |
