Type 63

Type 63

␗M18 GMC

Type 62

Type 63

␗M18 GMC

Type 62

China

IV Rank

Battle rating:

AB	RB	SB
6.3	6.3	6.3

Class:

Light tank

Research:63 000

Purchase:200 000

Show in game

Description

The Type 63 is a rank IV Chinese light tank with a battle rating of 6.3 (AB/RB/SB). It was introduced in Update 1.91 "Night Vision".

The Type 63 can be considered a domestic Chinese counterpart to the Soviet-produced PT-76 amphibious light tank, its predecessor in the tech tree. It is far from a copy, however. It features a similar cast turret to the Type 62 equipped with the same 85 mm gun, and the hull has larger dimensions and a different position for the driver. This 63-I variant has a more powerful engine as well. While the protection and gun handling are poor, the firepower and speed much improved from the PT-76. Few tanks at its battle rating can boast a HEAT-FS round with 300 mm of penetration, a nasty surprise for enemy heavy tanks. The Type 63 offers a taste of what's to come in the succeeding Type 62, which has similar firepower while improving in practically every aspect aside from the ability to swim.

General info

Survivability and armour

Armourfront / side / back

Hull14 / 10 / 10

Turret11 / 11 / 11

Crew4 people

Visibility75 %

Armour type:

• Rolled homogeneous armour
• Cast homogeneous armour (Turret front/sides, Gun mantlet)

Armour	Front	Sides	Rear	Roof
Hull	11 mm (82°) Upper glacis 14 mm (42°) Lower glacis	13 mm Top 10 mm Bottom	10 mm (1°) Top 10 mm (62°) Bottom	10 mm
Turret	11 mm (15-58°) Turret front 15 mm (10-69°) Gun mantlet	11 mm (17-58°)	11 mm (10-48°)	10 mm
Cupola	10 mm	10 mm	10 mm	10 mm

Notes:

• Suspension wheels are 10 mm thick.
• Tracks are 15 mm thick.

The Type 63-I's armour is no better than the PT-76 and should not be relied upon against any incoming fire. Even heavy machine guns and autocannons pose a serious threat to this vehicle; the turret has only 11 mm of cast steel for example and can be penetrated by the M2 Browning commonly mounted on US tanks. SPAAs and aircraft will rip the tank to shreds. In general, avoid being spotted and stay close to cover. Placing bushes on the front and top of the tank to delay recognition by enemies, even for a second or two, can help considerably.

The Type 63-I is vulnerable to overpressure damage. Chemical shells (HEAT, HEAT-FS, HE) of at least decent size will trigger it consistently. Kinetic shells tend to be less threatening; generally speaking, APHE rounds will only fuse if fired through the lower glacis, which has exactly enough armour to trigger the common 14 mm fuse sensitivity. The thinly armoured turret will not fuse most APHE rounds and it is possible for a Tiger II (P)'s fearsome PzGr 39/42 to pass through a turret cheek and only take one to two crew members with it.

The crew of 4 is better than the 3 in the PT-76, but the additional crew member resides in the crowded turret and the benefits to survivability are marginal.

Mobility

Amphibious

The design allows you to swim and control movement in the water

Speedforward / back

AB72 / 9 km/h

RB and SB65 / 9 km/h

Number of gears5 forward

1 back

Weight18.4 t

Engine power

AB763 hp

RB and SB400 hp

Power-to-weight ratio

AB41.5 hp/t

RB and SB21.7 hp/t

Game Mode	Max Speed (km/h)		Weight (tons)	Engine power (horsepower)		Power-to-weight ratio (hp/ton)
	Forward	Reverse		Stock	Upgraded	Stock	Upgraded
Arcade	72	9	18.4	620	763	33.7	41.47
Realistic	65	9		354	400	19.24	21.74

The Type 63 sees a decent improvement in mobility compared to the preceding PT-76, thus making this tank more attractive for flanking, or early game rushing. The Type 63 is also good for hill-climbing and can reach some nifty positions on some maps. The mobility lags slightly behind some contemporary tanks like the M41 Walker Bulldog and wheeled Italian vehicles are much faster on roads. It will still handily outrun medium and heavy tanks. The reverse speed of about 10 km/h is a slight improvement over the T-34-85 but by no means lightning-quick. If using shoot-and-scoot tactics, start backing into cover as soon as possible after firing a shot.

As an amphibious vehicle, the Type 63-I will not drown in water and can swim across rivers or lakes slowly but steadily. However, the lack of a gun stabilizer makes firing while on water very difficult. Avoid driving on water for more than short crossings if enemies are likely to see you, as it will be nearly impossible to defend yourself.

Modifications and economy

Repair costBasic → Reference

AB2 641 → 3 602

RB3 210 → 4 378

SB4 301 → 5 866

Total cost of modifications52 700

90 700

Talisman cost1 700

Crew training57 000

Experts200 000

Aces800

Research Aces520 000

Reward for battleAB / RB / SB

110 / 150 / 190 %

172 / 172 / 172 %

Modifications

Mobility	Protection	Firepower
Tracks Research: 3 500 Cost: 6 000 220 Suspension Research: 2 000 Cost: 3 400 125 Brake System Research: 2 000 Cost: 3 400 125 Filters Research: 3 300 Cost: 5 700 210 Transmission Research: 3 400 Cost: 5 900 220 Engine Research: 3 400 Cost: 5 900 220	Improved Parts Research: 3 500 Cost: 6 000 220 Improved FPE Research: 2 000 Cost: 3 400 125 Crew Replenishment Research: 3 300 Cost: 5 700 210	Horizontal Drive Research: 3 500 Cost: 6 000 220 Adjustment of Fire Research: 2 000 Cost: 3 400 125 Airstrike Research: 2 000 Cost: 3 400 125 85mm_APCBC_ammo_pack Research: 2 000 Cost: 3 400 125 Elevation Mechanism Research: 3 300 Cost: 5 700 210 85mm_HVAP_ammo_pack Research: 3 300 Cost: 5 700 210 Artillery Support Research: 3 400 Cost: 5 900 220 Improved optics Research: 3 400 Cost: 5 900 220 85mm_HEAT_FS_ammo_pack Research: 3 400 Cost: 5 900 220

The Type 63-I's stock grind is less painful than the PT-76 since it has a decent gun with usable ammunition from the start. But the tank does not have much going for it over a T-34-85 until the Type 1956 HEAT-FS, a Tier IV modification, is researched. Try focusing on the firepower modifications after Parts are unlocked, as the vehicle's stock mobility is not bad. Adjustment of Fire is very important since the Type 63-I's long reload does not give it much leeway if one's shot misses. Once the HEAT-FS is unlocked, the grind becomes significantly easier since the tank is now capable of harming enemies frontally from any distance, making assists much easier to come by and reducing its reliance on flanking.

Armaments

Main armament

85 mm Type 63 cannon

Ammunition47 rounds

First-order6 rounds

Reloadbasic crew → aces

9.2 → 7.0 s

Vertical guidance-4° / 22°

The Type-62-85-TC cannon is also used by the Type 62, but the reload is about two seconds longer on the Type 63 for some reason. This means that it has the same sluggish reload as the PT-76 despite having a dedicated loader. The gun handling is poor all-round, with the gun rotation, elevation, and depression speeds all being lower than the PT-76. This can be a pain when using the Type 63-I aggressively; it is unfortunate that the gun handling cannot keep up with the good mobility.

85 mm Type-62-85-TC					Turret rotation speed (°/s)					Reloading rate (seconds)
Mode	Capacity	Vertical	Horizontal	Stabilizer	Stock	Upgraded	Full	Expert	Aced	Stock	Full	Expert	Aced
Arcade	47	-4°/+22°	±180°	N/A	9.5	13.2	16.0	17.7	18.8	9.10	8.05	7.42	7.00
Realistic					5.9	7.0	8.5	9.4	10.0

Ammunition

Two APHE shells are available. The stock BR-365A APHEBC round has rather low penetration for its rank, but this is compensated by its excellent slope modifiers and high explosive mass. It penetrates other light tanks easily and is the best round to use when flanking. The BR-367 APCBC round has about 30 mm of extra penetration with less than half the TNT equivalent; while this is not a bad tradeoff, in practice it does not frontally penetrate many vehicles that the BR-365A round cannot, and when flanking the lower post-penetration damage is a big drawback. Using one or the other is mostly up to personal taste, though it does not hurt to bring some of both.

The BR-367P APCR shell has high velocity and better flat penetration than the APHE rounds, but as with other shells of its class, the angled performance and post-penetration damage are awful. It is best used as an interim shell before the HEAT-FS is unlocked; in emergency situations it can penetrate the turret face of the Tiger II (H) at close range.

The Type 1956 HEAT-FS shell is the most powerful option available to the Type 63-I and is very strong for its rank. 300 mm of flat penetration at any distance with good velocity and angled performance is no joke, capable of nullifying the armour of many heavy tanks. The main rival at the battle rating of 6.3 is the ST-A1's 90 mm HEAT-FS with 305 mm of flat penetration. It boasts more TNT equivalent than the HE shell, making it dangerous to lightly armoured targets like the common M18 Hellcat that are vulnerable to overpressure. The main drawbacks are the mediocre post-penetration damage and the tendency to bounce against heavily sloped armour, so aim carefully for important crew members, modules, and ammo racks.

The stock O-365K HE shell is very weak and should be avoided, because the HEAT-FS is better in all aspects.

Penetration statistics
Ammunition	Type of warhead	Penetration @ 0° Angle of Attack (mm)
		10 m	100 m	500 m	1,000 m	1,500 m	2,000 m
Type 56 APBC	APHEBC	135	133	124	113	104	95
Type 56 APCBC	APCBC	164	162	154	143	134	125
Type 56 HVAP	APCR	208	201	176	148	125	106
Type 56 HEAT-FS	HEATFS	300	300	300	300	300	300
Type 56 HE	HE	19	18	17	16	15	14

Shell details
Ammunition	Type of warhead	Velocity (m/s)	Projectile mass (kg)	Fuse delay (m)	Fuse sensitivity (mm)	Explosive mass (TNT equivalent) (g)	Ricochet
							0%	50%	100%
Type 56 APBC	APHEBC	792	9.2	1.2	14	164	48°	63°	71°
Type 56 APCBC	APCBC	792	9.2	1.2	14	77	48°	63°	71°
Type 56 HVAP	APCR	1,020	5.3	-	-	-	66°	70°	72°
Type 56 HEAT-FS	HEATFS	845	7	0.05	0.1	822.8	65°	72°	77°
Type 56 HE	HE	785	9.54	0.2	0.1	741	79°	80°	81°

Ammo racks

Ammo racks of the Type 63

Full ammo	1st rack empty	2nd rack empty	3rd rack empty	4th rack empty	5th rack empty	6th rack empty	7th rack empty	8th rack empty	Visual discrepancy
47	42 (+5)	36 (+11)	30 (+17)	24 (+23)	15 (+32)	11 (+36)	7 (+40)	1 (+46)	Yes

Note:

• Ammo rack #1 is in the back of the turret basket and will rotate with the turret.

The poor protection of the Type 63-I means that taking less ammunition will not improve post-penetration survivability by much. Taking 30 rounds or less will empty the ammo racks in the back of the fighting compartment and turret basket, so solid projectiles entering the front right of the vehicle might pass through and hit only the loader. This is mildly helpful against British tanks and M41s. In the event that 30 rounds is not enough, a rare occurrence, it's fine to take more.

Machine guns

7.62 mm Type 59 machine gun (coaxial)

Ammunition2 000 rounds

Belt capacity250 rounds

Reloadbasic crew → aces

10.4 → 8.0 s

Fire rate600 shots/min

The Type 63-I has a coaxial 7.62 SGMT machine gun. It is useful for spotting targets on the map but little else. The SGMT does enjoy a much larger magazine and better rate of fire than the typical WWII-era DT machine gun, which helps to clear fences and bushes that might prematurely detonate the HEAT-FS round. The lack of a pintle mounted heavy machine gun makes it difficult to ward off aircraft or gun down light vehicles like armoured cars.

7.62 mm SGMT
Mount	Capacity (Belt)	Fire rate	Vertical	Horizontal
Coaxial	3,250 (250)	600	N/A	N/A

Usage in battles

The Type 63-I is best used in a way that avoids direct exposure to enemy fire and gives you time to set up shots and ambushes. Running straight into battle or rushing cap points may not end well. Flanking is definitely a recommended method as this gives you the time you desperately need due to slow turret rotation and reload. It also gives you chances to shoot at enemy side armour, which is the only way to penetrate heavier enemies if you use the conventional shells. When flanking, avoid driving in the open if possible and keep an eye out for other light vehicles. Some of them, like armoured cars and Hellcats, can be overpressured by the HEAT-FS round on occasion, while others like the M41 Walker Bulldog used by several nations cannot and are best dispatched with the APHE rounds. Once a good position is reached, stay close to cover and be sure to hide when reloading.

The long reload makes selecting the right ammunition type for the situation very important. Otherwise, switching to the correct round could take up to 11 seconds, enough for an enemy to retreat or return fire. It is better to keep HEAT-FS loaded when entering an engagement if enemy types are unknown; any target that the HEAT-FS cannot overpressure can still be disabled with a careful shot to the gunner/driver/gun breech, and APHE can be used to finish crippled targets off. On the other hand, the first speedy enemies to appear at the start of a match are probably soft enough to destroy with APHE. Try to reload while in cover.

Like many domestic PRC tanks, the Type 63-I's gun handling is quite awful, so predict where enemies are likely to appear and always be on the lookout for potential ambushes or flankers. If your aim must be shifted rapidly, turn the hull as well as the turret. Though it lacks neutral steering, the hull traverse is quite good. Avoid trying to take down or harass aircraft unless they are bold enough to fly directly at you and escaping to cover is impossible.

Ground targets to watch out for include the infamous R3 T20 FA-HS, whose extreme mobility and rapid-fire autocannon are the bane of the Type 63-I's bad gun handling and armour, and the Ru 251, which also has incredible speed and can overpressure the Type 63-I with its chemical rounds.

Besides flanking, another tactic is to use the HEAT-FS shells for long range sniping. The HEAT-FS does not lose accuracy nor penetration at range, giving you the full 300 mm penetration on each hit. Keep in mind that the tank's optics are not great, having 4x zoom like the PT-76. Shooting and relocating is advisable due to the fact that if an enemy manages to be within range of you, they will only need one shot to take you out. Stay hidden or retreat if an enemy is looking in your direction and ready to fire, as the Type 63-I does not have the gun handling or armour necessary to peek effectively. Keep an eye on the sky and switch positions after a few kills, as it is very likely that planes and artillery will be on their way to seek revenge. Virtually any aircraft can dispatch the Type 63-I, even those lacking bombs or rockets.

Remember to constantly mark enemies with scouting. Besides helping your team and gaining assists for yourself, it allows teammates to mop up targets that you have crippled but are unwilling or unable to finish off. The reduction in aircraft spawn cost is also valuable due to the Type 63-I's fragility. If a good early-game run with the tank is terminated, it should be easy to pull out a suitable CAS aircraft like the Tu-2 or counter-CAS aircraft like the La-9 to exact revenge while leaving points in reserve for later spawns.

Pros and cons

Pros:

• Same 85 mm gun as the Type 62, more powerful and much less frustrating to use than the preceding PT-76
• HEAT-FS penetrates up to 300 mm of armour, excellent for the battle rating
• 4 crew members
• Improved mobility from the PT-76
• Can scout and assist with repairs
• Amphibious

Cons:

• No stabilizer, firing on the move or on water is difficult
• Very thin armour, vulnerable to overpressure damage
• Poor gun handling
• Slow turret traverse
• Slow reload, especially for a light tank
• No night vision devices
• No sources of smoke
• Larger profile than the PT-76

History

The Soviet Union delivered PT-76 tanks to the People's Republic of China in the 1950s. Their lightweight and amphibious capability were appreciated by the PLA, and in 1958 an order was placed for the development of an indigenous vehicle in the same vein. Initially a copy of the PT-76 called the Type 60 was made, but unsatisfactory performance and reliability issues prompted a redesign. The new design was finalized in 1963 and entered service as the Type 63 light tank, not to be confused with the Type 63 armoured personnel carrier that served as a basis for the ZSD63. While resembling the PT-76, the Type 63 tanks featured notable differences, such as a new engine, a relocated driver's station, and a new turret with an 85 mm gun. Overall dimensions were slightly enlarged for extra flotation. The Type 63 was intended for use in the wet and muddy terrain of southern China and also for seaborne assaults - many were stationed in the southern coast, across the strait from Taiwan.

The improved Type 63-I variant replaced the original 240 hp V6 engine derived from the PT-76 with a more powerful V12 12150-L2 engine developing about 400 hp. Additional upgrades were developed over the years. The 63-II variant from the 1970s added laser rangefinder and night vision equipment. The 63HG variant from the 1990s had a boat-like hull with a rounded nose and a modified turret with a 105 mm gun. In the late 1990s, the ultimate Type 63A variant entered service. It featured a new welded turret with improved protection, a 105 mm gun, modern fire control systems, and a further redesigned hull.

The Type 63 was exported to several countries, including Myanmar, Albania, and Vietnam. It remains in use with several of them today. The Type 63A, which is a modification of the Type 63 with 105mm gun and improved armour, still serves with the PLA today, however it is being gradually replaced by the larger and more advanced ZTD-05 amphibious assault vehicle.

Media

Skins

• Skins and camouflages for the Type 63 from live.warthunder.com.

See also

• PT-76B
• PT-76 (China)

External links

Paste links to sources and external resources, such as:

• topic on the official game forum;
• other literature.

Norinco (China North Industries Corporation)
Light AFV/IFV
WZ501	ZBD86¹
WZ131	▂Type 62 · Type 62
WZ211	Type 63 · ZTS63
WZ502	ZBD04A
MBT
WZ120	Type 59¹ · ZTZ59A · ZTZ59D1
WZ121	Type 69
WZ122	ZTZ88B · ZTZ88A · ZTZ96 · ZTZ96A · ZTZ96A (P)
WZ123	ZTZ99-II · ZTZ99-III
WZ1001	WZ1001(E) LCT · ZTZ99A
Tank Destroyers	AFT09 · PTL02 · PTZ89 · ZLT11
SPH	PLZ83
SPAA	ZSD63/PG87² · PGZ09 · PGZ04A
Export
WZ121	Type 69-IIa · T-69 II G
MBT2000	MBT-2000 · Al-Khalid-I
MBT3000	VT4A1
Other	WMA301 · WZ305
	¹ License production / Reverse engineered · ² Field modifications