Panther II

Panther II

Panther II

Germany

IV Rank

Battle rating:

AB	RB	SB
7.0	7.0	7.0

Class:

Medium tank

Purchase:Bundle or Gift

Show in game

This page is about the German medium tank Panther II. For other tanks of the family, see Panther tank (Family). For other uses, see Panther (Disambiguation).

Description

The Pz.Kpfw. Panther II is a gift rank IV German medium tank with a battle rating of 7.0 (AB/RB/SB). It was introduced to the main tree during the Closed Beta Test for Ground Forces before Update 1.41, however, it was removed from the tree and became a gift vehicle as of Update 1.91.

General info

Survivability and armour

Describe armour protection. Note the most well protected and key weak areas. Appreciate the layout of modules as well as the number and location of crew members. Is the level of armour protection sufficient, is the placement of modules helpful for survival in combat?

If necessary use a visual template to indicate the most secure and weak zones of the armour.

Mobility

Write about the mobility of the ground vehicle. Estimate the specific power and manoeuvrability, as well as the maximum speed forwards and backwards.

Armaments

Main armament

Give the reader information about the characteristics of the main gun. Assess its effectiveness in a battle based on the reloading speed, ballistics and the power of shells. Do not forget about the flexibility of the fire, that is how quickly the cannon can be aimed at the target, open fire on it and aim at another enemy. Add a link to the main article on the gun: {{main|Name of the weapon}}. Describe in general terms the ammunition available for the main gun. Give advice on how to use them and how to fill the ammunition storage.

Additional armament

Some tanks are armed with several guns in one or more turrets. Evaluate the additional weaponry and give advice on its use. Describe the ammunition available for additional weaponry. Give advice on how to use them and how to fill the ammunition storage. If there is no additional weaponry remove this subsection.

Machine guns

Offensive and anti-aircraft machine guns not only allow you to fight some aircraft but also are effective against lightly armoured vehicles. Evaluate machine guns and give recommendations on its use.

Usage in battles

Describe the tactics of playing in the vehicle, the features of using vehicles in the team and advice on tactics. Refrain from creating a "guide" - do not impose a single point of view but instead give the reader food for thought. Describe the most dangerous enemies and give recommendations on fighting them. If necessary, note the specifics of the game in different modes (AB, RB, SB).

Modules

Tier	Mobility		Protection	Firepower
I	Tracks		Parts	Horizontal Drive
II	Suspension	Brake System	FPE	Adjustment of Fire	HLGr 39
III	Filters		Crew Replenishment	Elevation Mechanism	Smoke grenade
IV	Transmission	Engine		Artillery Support	PzGr 40/43	Rangefinder

Pros and cons

Pros:

• Gun is powerful against its battle rated opponents
• Mobility is good
• Reverse speed is much better (14 km/h) compared to earlier Panthers
• Upper frontal plate can sometimes bounce shots
• Has neutral steering
• In RB and SB, the stock camo can hide the tank pretty well
• Wiggling the turret can save you, because the conical gun mantlet will bounce most shots

Cons:

• IR gear on the commander's cupola makes it very easy to spot
• Turret armour is not great, it can be penetrated easily if given the chance
• Turret crew is cramped, a penetrating shot can disable all of the crewmen
• Sides are littered with ammo racks, like the early Panthers
• Transmission is mounted frontally, so it can catch fire easily; on the other hand, it can eat up some shots and spare the crewmen inside
• Firepower to damage tanks frontally is lacking if up-tiered
• Turret traverse speed is not very good
• The scope for driver prevents the gun from aiming down

History

Development

In late 1942, German designers started the development of a more powerful and slightly larger version of Panther mounted on a newly designed chassis. In January of 1943, Adolf Hitler agreed on the development of Panther with increased armour protection especially for the needs of the Eastern Front. This project was designated Panther II and its design was planned along with the development of Tiger II. In February of 1943, it was decided that Panther II, in its design would resemble Tiger II and would have many common components such as tracks, transmission, suspension and road wheels. Both designs had common components in an attempt to standardize the production. Overall dimensions were very similar to those of Panther Ausf. G hull’s design was very similar to that of the late model Panther Ausf G but with many modernizations such as the arrangement of observation equipment and new engine deck. Its armour protection was significantly increased if compared to any other Panther variant produced. Side armour protection was 60 mm thick while frontal armour protection was 100 mm thick. It was planned to arm Panther II with the latest 75 mm KwK 42 L/100 or even 88 mm KwK 43 L/71 (without a muzzle brake) gun mounted in the newly designed narrow turret – Schmalturm (designed by Rheinmetall in 1944 and to be produced by Daimler-Benz).

Panther II's Schmalturm (narrow) turret was slightly different than that of Panther Ausf. F. The turret’s armour protection was significantly increased if compared to any other Panther turret. The front was 120-125 mm, gun mantlet was 150 mm, while sides and rear were 60 mm and the top was 30 mm thick. Schmalturm had special mountings for infra-red device and telescopic range finder. All of those modifications increased Panther II’s weight to 47 tons. Panther II was to be powered by a new Maybach HL234 engine with a total power of 900 hp operated by 8-speed hydraulic transmission. Instead, Maybach HL 230 P 30 engine was mounted and Maybach HL234 was later on due to being completed in August of 1945, for future Panther series. It was believed that Panther II’s performance would be similar to that of Panther Ausf G, while if ever produced Panther II would most likely suffer from the same problems as Tiger II. Simply because of its great weight and high fuel consumption which made it extremely slow. It is also unknown what other modifications would be made if Panther II would be combat tested.

In March of 1943, plans were laid that the production of the first series would start in late 1943 or early 1944 and that by spring of 1944, full-scale production of Panther II would start. On May 20th of 1943, Rheinmetall-Borsig proposed special air-defence turret designed for Panther II, mounted with four 20 mm MG151/20 guns but it never reached prototype stage.

Production and cancellation

In early 1944, MAN (Maschinenfabrik Augsburg-Nuremberg) was allowed to produce two prototypes but was only able to produce one in early 1945, without newly designed Schmalturm turret. On May 4th of 1944, it was realized that German industry was unable to start Panther II’s production and this project was abandoned in favour of further development of Panther based on lessons learned from Panther II. On June 3rd of 1944, all companies which were to produce Panther II were ordered to start the production on the regular Panther tank. The war ended before the Panther II could be used in any meaningful way to the war effort.

Survivor

The Americans captured the Panther II chassis and it was shipped to the states. Sometimes after 1946, a Panther G turret was added onto the chassis while it was at the Aberdeen Proving Grounds. In the 1960s, the Panther II chassis was transferred to the Smithsonian Institute, who proceeded to give the tank to the Patton Museum at Fort Knox in the 1970s. Following the closure of the Patton Museum, the Panther II is currently at the in-construction National Armor and Cavalry Museum at Fort Benning.

The project would go on to be developed into the Panther Ausf. F, which featured the Schmalturm derived from the Panther II.

In-game descripton

"Having adopted the Tiger II tank in the autumn of 1943, the Ministry of Armaments ordered the development of a new Panther II tank, specifying that maximum compatibility between the assembly of the two tanks be maintained. Development of the new tank design was assigned to the company Henschel & Sohn. The new tank was to have thicker armor (100 mm in the front and 60 mm on the sides) and was to be equipped with a Schmalturm turret. The main armament consisted of an 88 mm 8,8 cm KwK 43 L/70 tank gun with a long 70-caliber barrel, the same gun which was installed on the Tiger II(P).

The tank's weight had to be increased to 55 tons or more. The main design problem was the lack of a suitable engine for the heavier vehicle. Several options were developed for installing a MAN/Argus LD 220 750 hp engine or a Maybach HL 234 900 hp engine, using an eight-speed hydromechanical AK 7-200 gearbox, but this work was never completed. The chassis of the new Panther consisted of 7 all-metal rollers on a single torsion bar. The tank's treads were 660 mm wide.

By late 1944, the company had only managed to build one tank hull, which for testing purposes was fitted with a turret from a production Panther Ausf. G. The testing was never completed, and the tank was captured by American troops. This tank's hull is kept in the Patton Museum of Cavalry and Armor in Fort Knox.

It is likely that two Panther II prototypes were built which may have participated in battles at the end of the war. Further work, however, virtually stopped. Project E50 was commissioned to replace both the Panther I and the Panther II."

Media

Excellent additions to the article would be video guides, screenshots from the game, and photos.

See also

Links to the articles on the War Thunder Wiki that you think will be useful for the reader, for example:

• reference to the series of the vehicles;
• links to approximate analogues of other nations and research trees.

External links

Paste links to sources and external resources, such as:

• topic on the official game forum;
• encyclopedia page on the tank;
• other literature.