M60

This page is about the American main battle tank M60. For other versions, see M60 (Family). For other uses, see M60 (Disambiguation).

M60

M48A1

M60A1 (AOS)

M60

M48A1

M60A1 (AOS)

USA

V Rank

Battle rating:

AB	RB	SB
8.0	8.0	8.0

Class:

Medium tank

Research:120 000

Purchase:340 000

Show in game

Description

The 105 mm Gun Tank M60 is a rank V American medium tank with a battle rating of 8.0 (AB/RB/SB). It was introduced in Update 1.51 "Cold Steel".

General info

Survivability and armour

Armourfront / side / back

Hull93 / 70 / 40

Turret130 / 76 / 51

Crew4 people

Visibility142 %

Armour type:

• Cast homogeneous armour
• Rolled homogeneous armour (Rear roof, Rear)

Armour	Front (Slope Angle)	Sides	Rear	Roof
Hull	93 mm (65°) Front Glacis 143 mm (55°) Lower Glacis	74 mm	41 mm	20 mm
Turret	127 mm Turret front 152 mm Gun Mantlet	100 mm - 50.8 mm	50.8 mm	24 mm
Cupola	35 mm	25.4 mm	25.4 mm	25.4 mm

Notes:

• Suspension wheels are 20 mm thick and tracks are 30 mm thick.

Mobility

Speedforward / back

AB53 / 10 km/h

RB and SB48 / 9 km/h

Number of gears6 forward

2 back

Weight46.2 t

Engine power

AB1 431 hp

RB and SB750 hp

Power-to-weight ratio

AB31.0 hp/t

RB and SB16.2 hp/t

Game Mode	Max Speed (km/h)		Weight (tons)	Engine power (horsepower)		Power-to-weight ratio (hp/ton)
	Forward	Reverse		Stock	Upgraded	Stock	Upgraded
Arcade	53	10	46.2	1,162	1,431	25.15	30.97
Realistic	48	9		663	750	14.35	16.23

Modifications and economy

Repair costBasic → Reference

AB4 403 → 5 767

RB4 905 → 6 425

SB6 955 → 9 111

Total cost of modifications98 000

165 000

Talisman cost2 200

Crew training98 000

Experts340 000

Aces1 300

Research Aces780 000

Reward for battleAB / RB / SB

140 / 200 / 240 %

202 / 202 / 202 %

Modifications

Mobility	Protection	Firepower
Tracks Research: 6 800 Cost: 11 000 270 Suspension Research: 4 600 Cost: 7 400 185 Brake System Research: 4 600 Cost: 7 400 185 Filters Research: 6 400 Cost: 10 000 260 Transmission Research: 6 600 Cost: 11 000 270 Engine Research: 6 600 Cost: 11 000 270	Improved Parts Research: 4 400 Cost: 11 000 270 Improved FPE Research: 3 000 Cost: 7 400 185 Crew Replenishment Research: 6 400 Cost: 10 000 260	Horizontal Drive Research: 6 800 Cost: 11 000 270 Adjustment of Fire Research: 4 600 Cost: 7 400 185 105mm_usa_HESH_ammo_pack Research: 4 600 Cost: 7 400 185 Elevation Mechanism Research: 6 400 Cost: 10 000 260 105mm_us_M416_Smoke_ammo_pack Research: 6 400 Cost: 10 000 260 Artillery Support Research: 6 600 Cost: 11 000 270 105mm_usa_HEAT_FS_ammo_pack Research: 6 600 Cost: 11 000 270 Rangefinder Research: 6 600 Cost: 11 000 270

After researching Parts and FPE, it is recommended to focus on reaching the M456 HEATFS shell, which will allow the player to capitalize on the M60's excellent gun. After that, it is recommended to research mobility modifications.

Armaments

Rangefinder

Reduces the error and increases the maximum measurable distance of the rangefinder

Main armament

105 mm M68 cannon

Ammunition57 rounds

First-order22 rounds

Reloadbasic crew → aces

8.7 → 6.7 s

Vertical guidance-9° / 19°

105 mm M68					Turret rotation speed (°/s)					Reloading rate (seconds)
Mode	Capacity	Vertical	Horizontal	Stabilizer	Stock	Upgraded	Full	Expert	Aced	Stock	Full	Expert	Aced
Arcade	57	-9°/+19°	±180°	N/A	22.85	31.62	38.40	42.47	45.18	8.71	7.70	7.10	6.70
Realistic					14.28	16.80	20.40	22.56	24.00

Ammunition

• M392A2; APDS (Armour-Piercing Discarding Sabot) is capable of easily penetrating the majority of the foes it meets, but these rounds do require finesse as to their placing. Because the shell lacks an explosive filler, the best bet is to try and either knock out the majority of the enemy tank's crew or to destroy the enemy by ammo or fuel detonation through hitting their respective storage capacities. This, of course, requires knowledge about the vehicles the M60 may face - so be sure to use the game's X-Ray view in the hangar and analyse the potential foes for their weak spots! Also, keep in mind that with increased armour thickness the number of shrapnel shrinks. This round can penetrate certain angled armour like on the T-54/55s, but may fail at certain extreme angles at 60° or higher as seen on the Strv 103, so make sure you take aim at proper areas like the lower glacis to prevent shell shatter or ricochet.

• M393A2; HESH (High-Explosive Squash-Head) works very differently than other shell types. It ignores any angle, except for ricochet and deals damage by metal-flakes which are blown off inside the armour by the exterior explosion. Basically, the fighting compartment is showered in metal rain. Currently, only true armour thickness (opposed to the line of sight thickness) will provide sufficient means of protection, benefiting the USSR turret designs and in general German tanks. Unlike all high-explosive shells, the fuze isn't as sensitive and can bypass most objects e.g. fences, trees, pillars to hit its target. It is also possible to overpressure certain tanks by aiming at spots like the commander's cupola or exposed turret spots, though it may not penetrate certain heavy and medium tanks, but will be extremely powerful on light tanks or SPAA.

• M456; HEATFS (High-Explosive Anti-Tank Fin-Stabilized): The knowledge of enemy vehicle layouts gained from the stock shell (M392A2), will be handy to use for the M60's fullest potential - as the M456 is an ammunition round which can penetrate most vehicles' armour frontally. Like the APDS shot, increased armour thickness results in a reduced amount of shrapnel after penetration. Unlike APDS it has one downside: Given that it is a chemical energy round, its fuse is highly sensitive in regards to its practical application in battle. As a result, virtually anything, such as trees or even a fence, will set it off prematurely, so the HEATFS round cannot fire through obstructions with this kind. Do keep in mind that this round won't have full effectiveness on certain angled armour.

Penetration statistics
Ammunition	Type of warhead	Penetration @ 0° Angle of Attack (mm)
		10 m	100 m	500 m	1,000 m	1,500 m	2,000 m
M392A2	APDS	350	347	333	317	302	287
M393A2	HESH	127	127	127	127	127	127
M456	HEATFS	400	400	400	400	400	400

Shell details
Ammunition	Type of warhead	Velocity (m/s)	Projectile mass (kg)	Fuse delay (m)	Fuse sensitivity (mm)	Explosive mass (TNT equivalent) (kg)	Ricochet
							0%	50%	100%
M392A2	APDS	1,478	4	-	-	-	75°	78°	80°
M393A2	HESH	732	11.2	0.1	4	4.31	73°	77°	80°
M456	HEATFS	1,174	10.5	0.05	0.1	1.27	65°	72°	77°

Smoke shell characteristics
Ammunition	Velocity (m/s)	Projectile mass (kg)	Screen radius (m)	Screen deploy time (s)	Screen hold time (s)	Explosive mass (TNT equivalent) (g)
M416	732	11.6	16	5	25	50

Ammo racks

Ammo racks of the M60

Full ammo	1st rack empty	2nd rack empty	3rd rack empty	4th rack empty	5th rack empty	Visual discrepancy
57	49 (+8)	35 (+22)	23 (+34)	17 (+40)	1 (+56)	No

Machine guns

12.7 mm M85 machine gun

Ammunition900 rounds

Belt capacity180 rounds

Reloadbasic crew → aces

10.4 → 8.0 s

Fire rate626 shots/min

Vertical guidance-15° / 60°

7.62 mm M73 machine gun (coaxial)

Ammunition6 000 rounds

Belt capacity250 rounds

Reloadbasic crew → aces

10.4 → 8.0 s

Fire rate500 shots/min

12.7 mm M85
Mount	Capacity (Belt)	Fire rate	Vertical	Horizontal
Pintle	900 (180)	626	-15°/+60°	±180°

7.62 mm M73
Mount	Capacity (Belt)	Fire rate	Vertical	Horizontal
Coaxial	6,000 (250)	500	-	-

Usage in battles

To use this tank effectively do not charge straight into battle, instead, go around. Use the terrain, make it harder to be identifiable by selecting the appropriate camouflage and navigate using the map. To flank, the opponents from the sides or the rear, use a flanking tactic to surprise the enemy tankers and destroy them. However, do not let the M60 be seen and the longer it can stay hidden, the higher the chances of finding more tanks off guard and surviving the match. Try to attack from long distances: The M60 has a very powerful and accurate cannon. This can be equipped with some of the most lethal ammunition within its own BR range depending on how you view it. It will turn the biggest and most powerful tanks into blazing wrecks.

The M60 essentially bears the same frontal, or even shares the same, turret shape of the M48 tanks, keep in mind that both the M48A1 and M60 tanks also share other similar features with each other; and while they're different, assume that the cons of this tank were not changed much from its foldered predecessor.

Excluding the height differences and an obvious cupola, it may look similar to the T-54 series of tanks and an unskilled or unprepared T-54 player will pause for a brief amount of time to identify the tank. This will give the tank extra time to angle the tank and to calculate a perfect shot and destroy vital parts of the enemy tank. Do not expose/show the rear of the tank as this will give away the M60 immediately since the rear does not resemble a T-54 and is one of the weakest places on this tank.

Playing on maps which have villages, towns, and city centres modelled, such as Poland, Advance to the Rhine, Normandy etc. These require a more specific tactic to survive in these locations as being flanked and not knowing about it until it's too late is very common. A good way of preventing this while using an M60 tank is to not enter the urban environment. In these environments, the M60 will be normally too close for the armour to work as effectively. However, if going around the sides of the town and move in and out of streets, this will prevent the enemy team to predict where the M60 will go. The M60, once upgraded, offers some of the best handling in the game, use that as an advantage in narrow and congested streets.

When engaging with other medium tanks, the M60 offers an excellent gun which can dominate any other medium tank. If the HEATFS is unlocked, the M60 will be able to terminate any tank with one hit most of the time, although tanks with improved chemical energy protection (e.g. composite armour and ERA) will serve a more difficult situation to deal with. The closer to the enemy tank, the higher the odds of ending it with an instant termination. When using HESH rounds, do not hit the sides of the enemy tank, it won't really do much damage. However, when the enemy has exposed the front, especially the Upper Glacis of the tank, using the HESH rounds will cause a lot of damage to the Crew and could also end that tank in one shot. Examples are the T-54s, IS-3 and IS-4Ms. Against T-10Ms, its not that reliable because of spaced armour.

Make sure to not expose the rear or sides of the tank and turret. These are weakest parts and if hit is likely to end the tank.

Keep in mind the cupola, it houses the commander's optics as well as an M85 HMG fitted within the turret. While it gives the vehicle an added 360° anti-air capability, it also will present a weaker spot with armour around the cupola being rated to protect against small-arms fire most of the time and heightens the M60's overall silhouette. It could either be useful or a bane to this vehicle depending on how you utilize it.

Pros and cons

Pros:

• Front hull impenetrable against most Rank IV & some high-Rank V tanks
• Decent turning capability
• Great off-road speed (but not as great compared to Leopards and T-10Ms)
• Once fully upgraded it offers very sharp handling and manoeuvrability
• Excellent acceleration when fully upgraded
• Very good stock turret traverse speed
• Powerful 105 mm gun
  • Very accurate gun at long ranges when upgraded
  • Good APDS stock shell
  • HEATFS and HESH shells available

Cons:

• Very high profile due to the large and noticeable commander's cupola
  • The cupola is an obvious and well-known weak spot; its armour is very thin and can be penetrated easily by APCBC and HEAT rounds
  • Enemy shells can bounce off the turret roof (due to the angle) and could enter the cupola
  • Commander's .50 cal HMG is slow in manoeuvrability and its effectiveness limited due to the cupola's poor elevation and speed
• Side armour is thin and can be penetrated easily
• Gun mantlet is rather weakly-armoured and can easily be penetrated even by lower-tier tanks
• Turret ring is a weak spot
• Front is vulnerable to HEAT and the most powerful APHE (T-10M, Maus) at close range

History

Development

The M60 was the American response to the Soviet T-54A main battle tank after one was captured by Hungarians during the Hungarian Revolution of 1956. The American main tank at the time, the M47 and M48 Pattons and with their 90 mm cannon, was found to be incapable of defeating the T-54 armour from the front. Plus, with the rumour that a new Soviet tank better than the T-54 was in development with a 115 mm cannon (which would be the T-62), the Americans saw a need to upgrade or replace their M48 Patton tanks. These upgrades are focused on improving the armour, a bigger gun, better rangefinders, and even an autoloader system.

At the time, a program designated the T95 launched in June 1954 was meant to replace the M48 Patton with a better gun and mobility. This new tank development was approved in August 1957 and was intended to be a radical change in the American tank doctrine, changing from the World War II era weight classes of light, medium, and heavy tanks and instead classifying as an all-purpose "main battle tanks" or an "airborne reconnaissance/assault vehicles". However, as the development came to a slow speed, it was determined that the T95 series was only marginally better than their improved M48A2 Patton, so it was proposed that the M48 design be upgraded with the new improvements made by the T95 program, focusing on better firepower and fuel efficiency. This development would be designated the XM60.

The main gun on the new design was to be the new 105 mm M68 cannon, which was similar to the British 105 mm L7 Royal Ordnance gun made in response to the Soviet T-54 tank, even firing the same ammunition. The decision was made among six different tank guns for accuracy, damage on target, rate of fire, and penetration. The cannon parts were initially imported from Britain until American licensed version could be produced at the same quality. Armour was initially going to be composite armour made out of silica glass in response to better anti-tank weapons being produced. However, during production, the composite armour was changed back to conventional steel due to manufacturing constraints and cost. The XM60 design was accepted in 1959 and standardized as the 105 mm Gun Full Tracked Combat Tank M60 in March 1959, entering service in 1960. During its production life from 1959 to 1987, over 15,000 units were produced. Despite its common naming as the M60 Patton, it is never officially classified as a series of the Patton tanks and only as a "product descendant".

The M60 was meant to only be an interim design in the "main battle tank" designation, but it featured many innovative upgrades. The 105 mm gun with a bore evacuator, a straight sloping front armour rather than the rounded one on the M48, three rollers on the suspension and road wheels made out of aluminium. The design also used an improved engine, transmission, and driving unit. M60 design could be cast or welded together, and the turret was largely similar except the different mantlet to accept the new 105 mm gun. The tank had a crew of four, the commander, gunner, loader, and driver. The M60 was the last American tank to feature conventional steel armour in its design.

Variants

The M60 started with its base variant, which was very similar to the M48 Patton, the differences between the two being a wedge-shaped hull, three return rollers, and aluminium road wheels. The next one is the M60A1 variant, which began production in October 1962 with a better "needle-nose" turret, improved armour protection, and suspension. This was meant to be the main variant, but the development of a "main battle tank" was slower so the M60A1 served much longer than its intended period, from 1960 to the 1980s. Another variant to be made was the M60A2, which had a changed turret design and had the 152 mm gun found on the M551 that could fire standard HEAT shells or an anti-tank missiles, but this variant was found to be unreliable and was phased out quickly. The last major variant was the M60A3, which featured many technological enhancements with a new rangefinder, ballistic computer, and a turret stabilization. This tank is the most modern of the three variants and is still being used by certain countries with even some advantages over the American main battle tank M1 Abrams during its introduction with better thermal sights, diesel engine, escape hatches, variety in ammunition, and ability to act as artillery.

Combat usage

The M60 in American service were first deployed in Vietnam, but only as engineer vehicles or bridge layers. The M60s continued to serve in American service all the way to the Gulf War in Operation Desert Storm in the Marine Corps and Air Force, however, at the time the newer M1 Abrams in service were already replacing the M60 tanks. Despite that, they did well in combat, where M60A1s in Marine service fought an Iraqi force composed of Soviet T-54s and T-72s and destroyed 100 tanks with the loss of only one M60 tank. The M60s were all retired after 2005 in US service.

Israel was another large user of the M60 tanks, seeing service in the Yom Kippur War with the quantity of 150, but many were destroyed by the new anti-tank missiles supplied by the Soviets to Egypt. It was widely praised for its firepower and manoeuvrability, however, and many were upgraded with better tracks and armour in the form of explosive reactive armour to combat anti-tank missiles. They saw service again in the 1982 Lebanon War against T-54s and T-72s and even World War II era T-34s. The M60 in Israeli service were retired by 2014. Today, the M60 tanks are still used in many different countries, such as Egypt, Brazil, Greece, Iran, Turkey, Yemen, China, and more. Despite its age, attempts at upgrading its armour and armament had been made American defence contractor Raytheon, able to keep the M60A3 up to date with the newer M1A1 Abrams with the 120 mm Rheinmetall gun and reactive armour.

Archive of the in-game description

The M60 primary combat tank was designed to have a standard layout with the control compartment in the front part of the vehicle, the combat compartment in the middle, and the engine and transmission compartment in the rear. This new vehicle was a synthesis of the M48 turret and the new 105 mm M68 cannon, similar to British guns of the L7 series, which was produced in the US under license and adapted to the tank's diesel engine. Unlike the curved front end of the M48, the new vehicle had a standard rectangular body. In terms of the division of the body, the similarity to a boat was preserved throughout the length of the vehicle. In order to reduce the tank's weight, which inevitably grew due to its thicker armour and heavier new cannon, aluminium alloys had to be widely used during its construction. Aluminium was used to make parts of the undercarriage, the fuel tanks, the rotating shelf in the turret, the shelves over the treads, and various levers and fastening components. The cramped M1 commander's tower was replaced with a spacious, low-profile M19. The first version of the XM60 was built in March 1959. It was added to the US arsenal under the name M60.

Media

Skins

• Skins and camouflages for the M60 from live.warthunder.com.

Videos

The M60 family discusses the M60 at 0:47 - War Thunder Official Channel

M60 Patton tank - Simon Hutchinson

See also

Links to the articles on the War Thunder Wiki that you think will be useful for the reader, for example:

• reference to the series of the vehicles;
• links to approximate analogues of other nations and research trees.

External links

• [Devblog] M60
• [Vehicle Profile] U.S. medium tank M60

Chrysler Defense
MBTs
M48 Patton	M48A1
M60	M60 · M60A1 (AOS) · M60A2 · M60A1 RISE (P) · M60A3 TTS
M1	XM1 (Chrysler) · M1 Abrams
Export
M48	M48A2 C · M48A2 G A2 · ␗M48A1 · Magach 1 · Magach 2
M60	␗M60A3 TTS · M60A1 "D.C.Ariete" ·
Note	Chrysler Defense was purchased by General Dynamics Land Systems (GDLS) in 1982.