M3 Stuart

This page is about the American light tank M3 Stuart. For other versions, see M3 Stuart (Family). For other uses, see M3 (Disambiguation).

M3 Stuart

M2A4

M3A1 Stuart

M3 Stuart

M2A4

M3A1 Stuart

USA

I Rank

Battle rating:

AB	RB	SB
1.7	2.0	2.0

Class:

Light tank

Research:2 900

Purchase:700

Show in game

Description

The Light Tank M3 Stuart is a rank I American light tank with a battle rating of 1.7 (AB) and 2.0 (RB/SB). It was one of the first American tanks to be released with the American ground tree in Update 1.45 "Steel Generals". With a better engine and transmission system than the M2 light tanks, the M3 Stuart is more able to manoeuvre the battlefield as a dependable light tank.

General info

M3 Stuart driving in the Snow (Frozen Pass)

Survivability and armour

Armourfront / side / back

Hull44 / 25 / 25

Turret38 / 25 / 25

Crew4 people

Visibility89 %

Being a light tank the M3 Stuart has fairly thin armour, it can generally protect against most machine guns but will usually not stand up against the main weapons of most enemy tanks at its battle rating. The inside of the tank is fairly cramped with the two turret members standing, this means that the likelihood of a crew member being hit is fairly high.

Armour type:

• Rolled homogeneous armour
• Cast homogeneous armour (lower frontal plate)

Armour	Front	Sides	Rear	Roof
Hull	38.1 mm (18°) Driver Port 15.8 mm (69°) Front Glacis	25.4 mm	25.4 mm	12.7 mm
Turret	38.1 mm	25.4 mm	25.4 mm	12.7 mm

Notes:

• Suspension wheels and bogies are 15 mm thick, tracks are 10 mm thick.

M3 Stuart Turning Demo at Slow and Fast speeds

Mobility

Speedforward / back

AB56 / 7 km/h

RB and SB51 / 6 km/h

Number of gears5 forward

1 back

Weight12.7 t

Engine power

AB500 hp

RB and SB262 hp

Power-to-weight ratio

AB39.4 hp/t

RB and SB20.6 hp/t

Game Mode	Max Speed (km/h)		Weight (tons)	Engine power (horsepower)		Power-to-weight ratio (hp/ton)
	Forward	Reverse		Stock	Upgraded	Stock	Upgraded
Arcade	56	7	12.7	406	500	31.97	39.37
Realistic	51	6		232	262	18.27	20.63

The M3 Stuart can reach a speed of 49 km/h off-road and up to 50 km/h on road. It can feel sluggish while turning at a lower speed as it lacks neutral steer, but when moving forward the turning is much smoother and quicker. The vehicle reverses at up to 5 km/h which while somewhat slow, is still usable in most situations on the battlefield.

Modifications and economy

Repair costBasic → Reference

AB100 → 128

RB87 → 111

SB114 → 146

Total cost of modifications2 970

890

Talisman cost190

Crew training200

Experts1 000

Aces20

Research Aces96 000

Reward for battleAB / RB / SB

10 / 10 / 10 %

100 / 100 / 100 %

Modifications

Mobility	Protection	Firepower
Tracks Research: 150 Cost: 45 40 Suspension Research: 165 Cost: 50 45 Brake System Research: 165 Cost: 50 45 Filters Research: 250 Cost: 75 70 Transmission Research: 320 Cost: 95 85 Engine Research: 320 Cost: 95 85	Improved Parts Research: 150 Cost: 45 40 Improved FPE Research: 165 Cost: 50 45 Crew Replenishment Research: 250 Cost: 75 70	Horizontal Drive Research: 150 Cost: 45 40 37mm_usa_m3_APC_ammo_pack Research: 150 Cost: 45 40 Adjustment of Fire Research: 165 Cost: 50 45 Elevation Mechanism Research: 250 Cost: 75 70 Artillery Support Research: 320 Cost: 95 85

Armaments

Main armament

37 mm M5 cannon

Vertical stabilizer

Reduces the swing of the gun in one plane while moving

Ammunition103 rounds

Reloadbasic crew → aces

3.7 → 2.9 s

Vertical guidance-10° / 20°

The main gun of the M3 Stuart is a 37 mm M5 cannon, this gun is also featured on the M2A4 and M3 Lee, On the M3 Stuart the M5 can use 2 round types, either M74 (AP) or M51 (APCBC) with the latter being a Tier 1 modification.

The overall firepower is decent. The main cannon has an adequate penetration of about 60 mm which is more than enough to go through most tanks below 2.0, for example, T-26, Pz.III and Pz.35t. Although the available ammunition is all solid shells, they still make quite a bit shrapnel when penetrated which is enough to one-shot compact tanks like T-26 and Pz.35t. For larger tanks like the LVT(A), accurate shots pinpointing the crew are required which might be a little hard for new players. The cannon has enough accuracy to precisely knock out the enemy's crew within 500m. If one shot misses, the reload time of around 3.5 seconds allows quick following shots.

There is a nice stabiliser for the cannon which is a big advantage when exchanging fire, as it allows you to move out of cover and fire (usually before the enemy) without having to wait for your tank to stop wobbling. The stabiliser should be utilised to maximise your chance of surviving and killing. Note that it only works below 10 kph, so remember to slow down or it will not stabilise the gun.

Targets like the 15cm sIG 33 B Sfl or M3 GMC (mixed battle) can be quite hard to destroy, as their armour is thin enough to create little shrapnel, but are also thick enough to stop MG bullets. Against them, you can only rely on you fire rate, accuracy and of course your knowledge of their crew position to knock out their crew one by one. Always go for the gunners or drivers first, if you failed then they can always fight back and one-shot you.

The main cannon is only effective in close-quarter combat (usually within 200m) or against weakly armoured targets since the penetration drops drastically as the range increases, plus the small calibre makes the shells easy to ricochet. When encountering fairly well armoured tanks like the M13/40 or H.35, try and break their gun barrels first or track them. If they are too far away, pin them on the map and call teammates to help.

37 mm M5					Turret rotation speed (°/s)					Reloading rate (seconds)
Mode	Capacity	Vertical	Horizontal	Stabilizer	Stock	Upgraded	Full	Expert	Aced	Stock	Full	Expert	Aced
Arcade	103	-10°/+20°	±180°	Vertical	19.04	26.35	32.00	35.00	37.65	3.77	3.33	3.07	2.90
Realistic					11.90	14.00	17.00	18.80	20.00

Ammunition

Penetration statistics
Ammunition	Type of warhead	Penetration @ 0° Angle of Attack (mm)
		10 m	100 m	500 m	1,000 m	1,500 m	2,000 m
M74 shot	AP	67	65	56	46	38	32
M51 shot	APCBC	75	72	62	51	43	35

Shell details
Ammunition	Type of warhead	Velocity (m/s)	Projectile Mass (kg)	Fuse delay (m)	Fuse sensitivity (mm)	Explosive Mass (TNT equivalent) (g)	Ricochet
							0%	50%	100%
M74 shot	AP	792	0.87	N/A	N/A	N/A	47°	60°	65°
M51 shot	APCBC	792	0.87	N/A	N/A	N/A	48°	63°	71°

Ammo racks

Ammo racks of the M3 Stuart

Full ammo	1st rack empty	2nd rack empty	3rd rack empty	Visual discrepancy
103	69 (+34)	35 (+68)	1 (+102)	No

Machine guns

7.62 mm M1919A4 machine gun

Ammunition2 000 rounds

Belt capacity250 rounds

Reloadbasic crew → aces

10.4 → 8.0 s

Fire rate500 shots/min

3 x 7.62 mm M1919A4 machine gun (coaxial)

Ammunition6 250 rounds

Belt capacity250 rounds

Reloadbasic crew → aces

10.4 → 8.0 s

Fire rate500 shots/min

Alongside the main gun, the M3 has 4 additional 7.62 mm M1919A4 machine guns. The first machine gun noted is in a coaxial mount aligned with the gun, second is mounted on the turret top in a pintle mount and the last two are mounted on the hull sides in a fixed firing position. The M3 does also have a hull front machine gun, however, this machine gun cannot be fired.

The machine gun is only powerful enough to destroy poorly protected vehicles such as AS 42, FlakPz I and GAZ-AAA. The penetration of around 10 mm is not enough to go through the frontal armour of those not-so-weakly-armoured tanks like SU-5-1, Panzerjager 1 or 15cm sIG 33 B Sfl. If you are skilled the two machine guns can effectively damage low-flying biplanes.

7.62 mm M1919A4
Mount	Capacity (Belt)	Fire rate	Vertical	Horizontal
Pintle	2,000 (250)	500	-10°/+70°	±60°
Coaxial	2,250 (250)	500	N/A	N/A
Hull	2,000 (250)	500	N/A	N/A
Hull	2,000 (250)	500	N/A	N/A

Usage in battles

When driving the M3 Stuart it is best to maintain some distance from enemy vehicles, this is advisable due to the somewhat thin armour and closely packed crew that you have to work with. If you are on a smaller map where keeping distance from enemy vehicles is not possible then it would be a good idea to use buildings and landscape features for cover and to keep your vehicle concealed.

In the majority of cases, you will be able to go through the frontal armour of enemy tanks (best pen is 75 mm) although some vehicles with heavily angled front armour may be able to stop your round being effective, a consistently effective tactic is to flank an enemy vehicle and fire into the side of the crew compartment, aiming near the turret to disable their ability to fire is a good way to use your first shot. Thanks to the quick (at best 2.9s) reload of the M3 you can then put second and third shots into the enemy if needed to finish off their crew.

Another aspect worth mentioning here is the mobility of the M3. While not the fastest vehicle at its BR it certainly still has competitive mobility that will allow it to reach capture points quickly or get to a good camping or flanking position before most enemy or friendly vehicles.

Enemies worth noting:

Specific enemy vehicles that bear mentioning are firstly any Germans with the 20 mm KwK/FlaK38 cannon, this gun might be small but can have up to 64 mm of pen, which is enough to go through the M3 almost anywhere. These guns can also fire 10 rounds at 280 rounds/min before having to reload the clip, meaning that they will very easily take out your crew before you have a chance to respond. To counter, the best chance you have is to angle your frontal armour which can make it difficult for the PzGr 40 rounds to penetrate. The Russian T-50 and T-126 are vehicles you will also see commonly, these have fairly thick and angled frontal armour that will prevent you from easily getting through. These tanks can also carry an APHEBC round that will destroy you in one shot with little difficulty, to counter you should use your speed to attempt to get a side shot into either the turret or engine. If the T-50 cannot move you can outrun its turret and finish it without much difficulty.

It is likely that the M3 will encounter some rough heavies, like the Matilda III and the B1 bis. The best tactic against these types of targets is to use the M3's fast speed, get within 200 m from them and attack, with shooting at point-blank range being the most effective way. Before conducting an attack, check the M3's and the enemy's surroundings to make sure no one will ambush the M3. While charging, use the M3's quick turns to suddenly change direction to avoid being shot if they are aiming and firing at the M3. Once the tank is at the ideal distance, manoeuvre so that the gun is perpendicular to their armour. Do not shoot if the enemy is angling! The small calibre 37 mm gun is very likely to bounce off or not penetrate against sloped armour.

For the Matilda III, shoot at the middle of the near-vertical frontal plate to knock out the driver first, since the 37 mm shell is not enough to knock out the gunner after penetrating. Once it is immobile, go to its side and finish it by shooting its hull sides. Or, shoot the right side of the gun mantlet to disable its gunner. For the best chance of penetration, do not shoot its turret side.

For the B1, either aim for the near-vertical frontal armour plate at the right side of the hull, or the turret ring to incapacitate the commander/gunner, or simply move to its side and knock out the crews one by one by hitting its flat side armour.

An M3 Stuart attacking a BT-7

Pros and cons

Pros:

• Great cannon with good penetration, excellent rate of fire and gun depression; it can effectively penetrate common opponents like the Pz.II and Chi-Ha, as well as heavy targets like the B1 bis or Matilda III
• Excellent acceleration, top speed and turning ability on all terrains; easily outruns slower opponents like the Pz.III
• Access to a vertical stabiliser which most tanks don't have, it is an advantage in close-quarter encounters
• Respectable frontal armour that, if angled, might bounce some shells from a distance (eg. Japanese 37 mm/German 20 mm)
• Small turret profile makes it harder to get hit when hull-down
• Empty space below the turret crew can absorb poorly aimed shots, they tend to not do much damage

Cons:

• Weak armour against high-penetration shells like 50 mm Kwk 39 or 76 mm F-34
• Its shells do not have explosive filler, severely limiting the post-penetration effect especially against spacious tanks like the LVT(A)(1)
• Inefficient brakes when trying to stop the tank at full speed
• Hull is fairly tall for a light tank and the crews are closely packed, reducing its survivability

History

Development

The American light tank design prior to World War II, the M2 light tank, was seen as obsolete after observing Germany's Panzer forces tear through Europe. The design was to be upgraded with more armour, a better suspension, and a new gun recoil system. The revised version was designated the Light Tank M3, which the British named the Stuart. At its basis, the light tank had a 37 mm cannon with a similar layout as the M2 light tank, with the radial engine at the rear and the transmission on the front, though the radial engine was in high demand so the Guiberson diesel T-1210 were fitted in some models to substitute the engine. The design used the VVSS bogie system seen on previous American tank designs. The tank had a crew of four: driver, assistant driver, gunner, and commander, who doubled as the loader.

The first variant of the M3 Stuart light tank was very similar to the M2 light tanks. It had five machine gun armaments scattered around like the M2, but featured better armour and a better cannon with the 37 mm M6 cannon. The design did not have a turret basket for the crew and it was constructed out of rivets, which increased the chance of spalling in the tank. Nevertheless, the first variant M3 saw about 5,811 units produced. The second variant, the M3A1 Stuart, featured a new turret with no cupola on it, plus an added gun stabilizer. The machine guns on the hull sides were removed, so now the total machine guns were reduced from five to three. The design also featured a welded armour design to remove the weakness of riveted armour. 4,621 of this variant was produced from May 1942 to February 1943. The most used variant, the M5A1 Stuart, had a completely redesigned hull and turret, with the hull most notably having a full sloping frontal armour than the previous designs. This variant had about 6,810 units produced. All in all, the M3 light tank design and all its later variants were produced in massive quantities from March 1941 to October 1943 with a total of 25,000 units produced.

Combat usage

The British were the first to use the M3 Stuart in Africa in 1941, using it in Operation Crusader. However, the result ended with heavy losses, due to the better training the German Afrika Korps had compared to the British tank doctrine. The encounter also pointed out many flaws in the M3, mainly the cramped interior and limited operational range, but was praised for its high mobility and reliability when compared to the British contemporary designs. In 1942, the Stuarts were generally kept as recon units rather than combat units, and some were even modified to improve speed and range by removing the turret, and others were converted to armoured personnel carriers and command vehicles. Though the British used it extensively, it was still in small proportion compared to American usage. The Soviet Union was also another user of the M3 but found it unfavourable due to their own logistics, plus it was not made to withstand the Russian Rasputitsa or even the winter. The Soviet eventually turned down any more offers for the Stuart by 1943. The M3s also supported the British and Chinese forces in Asia against the Japanese Army, and also France and Yugoslavia in Europe against the German Wehrmacht.

The Americans used it widely in both operational theatres. In the Pacific, the M3s were the first tanks America used in a tank vs. tank operation against the Imperial Japanese Army, where five M3s fought Type 95 Ha-Gos in a well-known action in the Phillippines. In total 108 M3s served with the 192nd and 194th Tank Battalions, also known as the 1st Provisional Tank Group, in the 1941 U.S. defence of the Phillippines, despite having no HE ammo issued. More than 30 were captured by the Japanese, who equipped their 7th Tank Regiment with them, who used them to defend the Philippines again, against the US in 1944. M3s were also used by Company B of the 1st Marine Tank Battalion at Guadalcanal in 1942. Though the Stuarts were newer than the Japanese tank designs by about five years, they were seen as equal in performance and firepower, but the M3 benefited by the support of the American industry arm. The Stuarts served in the Pacific slightly better than its heavier counterparts such as the M4 Shermans due to its lighter weight and manoeuvrability in the poor jungle terrain, but the M3 Stuarts in the Pacific were gradually replaced by M4 Shermans due to heavy losses from its thinner armour. The M3 was also some of the first US tanks to be converted into flamethrower tanks, named as the "Satan". The Satan tanks provided favourable results to the concept of a flamethrower tank and were replaced by flamethrower-equipped M4 Shermans in 1945.

In Europe, the M3 formed a large part of the American tank battalions, though following the British path by sidelining the Stuarts from combat duties after heavy losses and to serve alongside Shermans as scouting units. A typical tank battalion for the US Army consisted of three companies of Shermans and one of Stuarts. Other than scouting, the M3s were also used in cavalry roles and infantry support since their cannon are unable to compete with the German tank designs. Despite their dwindling capabilities in battle, the M3 was kept in service up until the end of the war due to the large production numbers.

After World War II, the Stuarts were given out as cheap surplus, countries such as China, India, and Pakistan picked up a few and used them in their conflicts. Portuguese also picked up a few M3s for the war in Angola, and the South African Corps continued using the Stuarts until 1955, where some were still kept in service until 1968 due to available parts. Today, Paraguay is still a user of the M3 light tanks, though as the only tracked armour used in the country.

The Stuart light tank design was also quite versatile that it was made into different variants for different roles on the battlefield. It served as an infantry support vehicle as to the 75mm GMC M8 and experiments were also taken to see if it could be adapted to an anti-aircraft gun and a flamethrower as well. However, the M3 was becoming an ageing design with inferior armour, cramped interior layout, and a small 37 mm gun, so a program to replace the light tank began in 1943 and became the M24 Chaffee, which would eventually replace the M3 Light Tank mostly after World War II.

In-game description

At the beginning of 1940 the Ordnance Department put together technical requirements for a new tank, the need for which was clear at the beginning of World War II. The first prototype was refashioned after the M2A4 at the Rock Island Arsenal. The tank had a riveted turret with few viewing slits, and the new M22 mantlet had thicker armour. The hull's frontal armour was also thickened to 45 mm and the turret to 38 mm. The tank hull was assembled from rolled armour plates on a frame made from angle sections and flat bars using rivets, though later releases were partially welded. From the end of 1941 to the beginning of 1942 a lack of standard gas-powered Continental aircraft engines forced some tanks to be outfitted with 265 hp Guiberson T-1020-4 diesel-powered, nine-cylinder, air-cooled radial engines capable of reaching 2,250 rpm. The diesel tanks could be recognized by their Vortex air filters and were generally designated M3 diesels. At the end of 1941 the tanks with carburetor engines were equipped with two cylindrically-shaped external fuel tanks, each with a capacity of 102 liters, that were connected to the engine supply system. After being exhausted, the external tanks could be jettisoned by the crew without leaving the tank. Adding the new tanks doubled the M3's range.

On July 5, 1940, the new light tank was standardized and released under the M3 designation. It was more widely known by the moniker General Stuart, given it by the British, who received a significant number of them in 1941 and 1942 via Lend-Lease.

Production of the M3 began in March 1941 at the American Car & Foundry factory. March 1941 through August 1942 saw 5,811 built, 1,285 of which were equipped with the Guiberson T-1020-4 engine.

M3 Stuart light tanks were also delivered to the Red Army and the UK via Lend-Lease to be used on all fronts in World War II beginning in 1941.

Media

Skins

• Skins and camouflages for the M3 Stuart from live.warthunder.com.

Videos

The Stuart Family discusses the M3 Stuart at 0:46 - War Thunder Official Channel

M3 Stuart Tank Review - NUSensei

See also

Other vehicles of similar configuration and role

• M2A2 · M2A4 (1st Arm.Div.)

External links

• [Wikipedia] M3 Stuart
• [Tanks Encyclopedia] Light Tank M3 Stuart