Difference between revisions of "CM11"

From War Thunder Wiki
Jump to: navigation, search
Visual (beta)Wikitext
m
(→‎Production and Service: CCP, as any other political party, can't invade anywhere, that's the task of PLA)
 
(46 intermediate revisions by 14 users not shown)
Line 1: Line 1:
−
{{Specs-Card|code=cn_cm11}}
+
{{Specs-Card
 +
|code=cn_cm11
 +
|images={{Specs-Card-Image|GarageImage_{{PAGENAME}}.jpg}}
 +
}}
  
 
== Description ==
 
== Description ==
 
<!-- ''In the description, the first part should be about the history of the creation and combat usage of the vehicle, as well as its key features. In the second part, tell the reader about the ground vehicle in the game. Insert a screenshot of the vehicle, so that if the novice player does not remember the vehicle by name, he will immediately understand what kind of vehicle the article is talking about.'' -->
 
<!-- ''In the description, the first part should be about the history of the creation and combat usage of the vehicle, as well as its key features. In the second part, tell the reader about the ground vehicle in the game. Insert a screenshot of the vehicle, so that if the novice player does not remember the vehicle by name, he will immediately understand what kind of vehicle the article is talking about.'' -->
−
<!-- [[File:GarageImage_{{PAGENAME}}.jpg|420px|thumb|left]]
+
The '''{{Specs|name}}''', also known as the M48H (Hybrid) and commonly referred to as "勇虎" (Brave Tiger), has served as the MBT of the ROCA since the 1990s. The decision to acquire new tanks arose from the need to replace the ageing fleet of M48A1s. In the late 1980s, the ROCA purchased several hundred [[M60A3 TTS (China)|M60A3 TTS]], and plans were made to upgrade the existing fleet of Pattons by utilizing spare hulls obtained from the United States. The result was a hybrid tank, combining an M60A3 hull, M48A5 turret, and an M1 Abrams-equivalent FCS. Additionally, some spare M48A5 turrets were mounted on a few dozen M48A1s, resulting in the CM12 variant. The initial batches of these hybrid tanks became the spearhead of the ROCA's armored corps, particularly intended to counter potential PLA landing operations. The CM11 has faithfully served for over three decades, but may soon be replaced by the M1A2T from the United States. This particular representation of the CM11 is equipped with an experimental French GIAT ERA package, providing enhanced protection against chemical shells.
−
{{break}} -->
+
 
−
The '''{{Specs|name}}''' is a rank {{Specs|rank}} Chinese medium tank {{Battle-rating}}. It was introduced in [[Update 1.91 "Night Vision"]].
+
Introduced in [[Update 1.91 "Night Vision"]], the CM11 is a Taiwanese upgrade to the [[M60A3 TTS (China)|M60A3]], and is currently the most modern tank in active service with the Republic of China Army. It is a mating of the M60 chassis with the turret from the [[M48A1 (China)|M48 Patton]], with a unique pagoda-like ERA array on the turret sides. Though its mobility and kinetic protection are poor, it has the same 105 mm gun as the [[M1 Abrams]], so if used carefully, the CM11 can do some serious damage with its thermal sight and powerful DM63 APFSDS.
  
 
== General info ==
 
== General info ==
 
=== Survivability and armour ===
 
=== Survivability and armour ===
−
<!--''Describe armour protection. Note the most well protected and key weak areas. Appreciate the layout of modules as well as the number and location of crew members. Is the level of armour protection sufficient, is the placement of modules helpful for survival in combat? If necessary use a visual template to indicate the most secure and weak zones of the armour.''-->
+
{{Specs-Tank-Armour}}
 +
<!-- ''Describe armour protection. Note the most well protected and key weak areas. Appreciate the layout of modules as well as the number and location of crew members. Is the level of armour protection sufficient, is the placement of modules helpful for survival in combat? If necessary use a visual template to indicate the most secure and weak zones of the armour.'' -->
  
−
The CM11 combines the hull of a M60 Patton with the turret of a M48 Patton, and as such the base turret and hull armour is more or less identical to these two tanks, respectively. The base armour is quite resistant to APHE rounds, which may be fired by the occasional [[Object 906]], [[Object 685]], and [[T-55AM-1]], but the vast majority of opponents at its rank use HEAT-FS and APFSDS rounds that can cut through steel like butter. To counter the former, the CM11 is slathered with ERA, and can generally survive the first shot from most HEAT-FS rounds. However the ERA offers close to no protection against APFSDS rounds, which are the round of choice in top rank battles, and as a result the armour should not be trusted.
+
The CM11 combines the hull of an M60 Patton with the turret of an M48 Patton, and as such, the base turret and hull armour are mostly identical to these two tanks, respectively. The M48's bulbous cupola has been replaced with a low-profile version. The armour is quite resistant to APHE rounds and autocannons, but the vast majority of opponents at its rank use HEATFS and APFSDS rounds that can cut through steel like butter. To counter the former, the CM11 is slathered with ERA and can generally survive the first shot from most HEATFS rounds. However, the ERA offers close to no protection against APFSDS rounds, which are the round of choice in top rank battles.
  
−
Post-penetration survivability is also questionable. It lacks blowout racks and ammunition tends to be scattered around the tank, so successful penetrations can reduce the CM11 to a fiery grave. It is a good idea to take no more ammunition than needed.
+
Post-penetration survivability is also questionable. It lacks blowout racks and ammunition is scattered around the tank, so successful penetrations can reduce the CM11 to a fiery grave.
 +
 
 +
'''Armour type:'''
 +
 
 +
* Cast homogeneous armour
 +
* Rolled homogeneous armour (Rear roof, Engine grille)
 +
* Structural steel (Spaced armour)
 +
 
 +
{| class="wikitable"
 +
|-
 +
! Armour !! Front !! Sides !! Rear !! Roof
 +
|-
 +
| Hull || 108 mm (66°) ''Front Glacis'' <br> 137 mm (55°) ''Lower Glacis''|| 36 - 70 mm || 25 mm (1°) ''Engine Grille'' <br> 40 mm (31°) ''Top'' <br> 28 mm (61°) ''Bottom'' || 36 mm ''Front'' <br> 20 mm ''Engine deck''
 +
|-
 +
| Turret || 140-240 mm (Variable thickness, 12-76°) ''Turret front'' <br> 152 mm (25-30°) ''Gun mantlet'' || 69-100 mm (12-36°) || 51-55 mm (2-71°) || 25-69 mm
 +
|-
 +
| Cupola || colspan="4" style="text-align: center;" | 25.4 mm (18-67°)
 +
|-
 +
|}
 +
 
 +
{| class="wikitable"
 +
! Explosive reactive armour !! Front (Slope angle) !! Sides
 +
|-
 +
| Hull || '''Upper glacis:''' <br> 5 mm ''Kinetic'' / 370 mm ''Chemical'' <br> '''Lower glacis:''' <br> 5 mm ''Kinetic'' / 370 mm ''Chemical'' <br> '''Fenders:''' <br> 5 mm ''Kinetic'' / 370 mm ''Chemical''
 +
!
 +
|-
 +
| Turret ||'''Gun mantlet:''' <br> 5 mm ''Kinetic'' / 370 mm ''Chemical'' <br> '''Cheeks:''' <br> 5 mm ''Kinetic'' / 370 mm ''Chemical'' ||'''Cheeks:''' <br> 5 mm ''Kinetic'' / 370 mm ''Chemical''
 +
|-
 +
|}
 +
 
 +
'''Notes:'''
 +
 
 +
* Tracks are 20 mm thick while suspension wheels are 20 mm thick.
 +
* Belly armour is 19 mm in the front, 13 mm in the rear.
 +
* There are several blocks of spaced armour on the fenders and turret that are 4 mm thick.
  
 
=== Mobility ===
 
=== Mobility ===
−
<!--''Write about the mobility of the ground vehicle. Estimate the specific power and manoeuvrability, as well as the maximum speed forward and backwards.''-->
+
{{Specs-Tank-Mobility}}
 +
<!-- ''Write about the mobility of the ground vehicle. Estimate the specific power and manoeuvrability, as well as the maximum speed forwards and backwards.'' -->
 +
 
 +
{{tankMobility|abMinHp=1,162|rbMinHp=663}}
  
−
The CM11's mobility is awful compared to its contemporaries. It weighs practically the same as the [[M1 Abrams]] while having less than half of the engine power. It is very slightly more mobile than the [[Chieftain Mk 10]], but that is a very low bar, and unlike the Chieftain it does not have strong armour to make up for it. Expect to be among the last to arrive on the battlefield.
+
The {{PAGENAME}}'s mobility is below average compared to its contemporaries. It weighs practically the same as the [[M1 Abrams]] while having less than half of the engine power. It is very slightly more mobile than the [[Chieftain Mk 10]], but that is a very low bar, and unlike the Chieftain it does not have strong armour to make up for it. Expect to be among the last to arrive on the battlefield.
 +
 
 +
=== Modifications and economy ===
 +
{{Specs-Economy}}
  
 
== Armaments ==
 
== Armaments ==
 +
{{Specs-Tank-Armaments}}
 
=== Main armament ===
 
=== Main armament ===
−
''Give the reader information about the characteristics of the main gun. Assess its effectiveness in a battle based on the reloading speed, ballistics and the power of shells. Do not forget about the flexibility of the fire, that is how quickly the cannon can be aimed at the target, open fire on it and aim at another enemy. Add a link to the main article on the gun: <code><nowiki>{{main|Name of the weapon}}</nowiki></code>. Describe in general terms the ammunition available for the main gun. Advise about how to use them and how to fill the ammunition storage.''
+
{{Specs-Tank-Weapon|1}}
 +
<!-- ''Give the reader information about the characteristics of the main gun. Assess its effectiveness in a battle based on the reloading speed, ballistics and the power of shells. Do not forget about the flexibility of the fire, that is how quickly the cannon can be aimed at the target, open fire on it and aim at another enemy. Add a link to the main article on the gun: <code><nowiki>{{main|Name of the weapon}}</nowiki></code>. Describe in general terms the ammunition available for the main gun. Give advice on how to use them and how to fill the ammunition storage.'' -->
 +
{{main|M68A1 (105 mm)}}
  
−
=== Additional armament ===
+
The M68A1 is the same gun used by the [[M1 Abrams]]. It enjoys a quicker reload that tops out at 5 seconds. The gun handling is otherwise identical to the [[M60A3 TTS]], which is not great but still better than typical Soviet tanks.
−
''Some tanks are armed with several guns in one or more turrets. Evaluate the additional weaponry and give advice on its use. Describe the ammunition available for additional weaponry. Give advice on about how to use them and how to fill the ammunition storage. If there is no additional weaponry remove this subsection.''
+
 
 +
{| class="wikitable" style="text-align:center" width="100%"
 +
|-
 +
! colspan="5" | [[M68A1 (105 mm)|105 mm M68A1]] || colspan="5" | Turret rotation speed (°/s) || colspan="4" | Reloading rate (seconds)
 +
|-
 +
! Mode !! Capacity !! Vertical !! Horizontal !! Stabilizer
 +
! Stock !! Upgraded !! Full !! Expert !! Aced
 +
! Stock !! Full !! Expert !! Aced
 +
|-
 +
! ''Arcade''
 +
| rowspan="2" | 56 || rowspan="2" | -9°/+19° || rowspan="2" | ±180° || rowspan="2" | Two-plane || 22.8 || 31.6 || 38.4 || 42.5 || 45.2 || rowspan="2" | 6.50 || rowspan="2" | 5.75 || rowspan="2" | 5.30 || rowspan="2" | 5.00
 +
|-
 +
! ''Realistic''
 +
| 14.3 || 16.8 || 20.4 || 22.6 || 24.0
 +
|-
 +
|}
 +
 
 +
==== Ammunition ====
 +
The stock M456 HEATFS is a standard 105 mm HEATFS round with 400 mm of penetration at any distance. At the CM11's battle rating, it is possible to face tanks with reactive or composite armour that can nullify the penetration. It will go clean through conventional armour and weaker implementations of spaced armour. While it becomes less useful for anti-tank duties after APFSDS is unlocked, it is worth keeping a few on hand for destroying light targets.
 +
 
 +
The M735 APFSDS round is a fairly good and reliable option. The high muzzle velocity makes it much easier to use than the HEATFS. The angled penetration of ~160 mm at 60 degrees leaves something to be desired, but most of the opponents that the CM11 will face are not heavily protected. M735 is sufficient against any enemy tank that does not have composite armour. MBTs with weaker composite armour like the [[XM-1 (GM)]] or [[M48 Super]] are still vulnerable. The [[MBT-70]] and [[KPz-70]] can resist M735 on the outer portions of their turret cheeks despite only having spaced armour.
 +
 
 +
The M393A2 HESH round is even more effective against light targets but has bad ballistics and low penetration. It can also be neutralized by spaced armour in addition to reactive and composite. The wide cone of damage may be helpful once in a while, so it does not hurt to take a handful, but it will generally not be useful.
 +
 
 +
For tougher targets, the unlockable DM63 APFSDS round will rarely disappoint. It has the second-highest penetration of any 105 mm APFSDS round currently in the game, exceeding 430 mm of flat penetration. This is actually enough to penetrate some portions of the [[M1 Abrams]]'s turret. However, it is overkill against most tanks the CM11 will encounter. Tanks to watch out for include the [[Chieftain Mk 10]], [[Challenger Mk.2]] and [[Challenger Mk.3]]. These all feature strong composite armour on their turret cheeks that DM63 will not be able to penetrate consistently, if at all. The DM63 will comfortably penetrate their hull armour, so shoot there instead.
 +
 
 +
{{:M68A1 (105 mm)/Ammunition|M456A2, M393A2, M735, M416, DM63}}
 +
 
 +
==== [[Ammo racks]] ====
 +
[[File:Ammoracks_{{PAGENAME}}.png|right|thumb|x250px|[[Ammo racks]] of the {{PAGENAME}}]]
 +
<!-- '''Last updated: 2.1.0.94''' -->
 +
{| class="wikitable" style="text-align:center"
 +
|-
 +
! Full<br>ammo
 +
! 1st<br>rack empty
 +
! 2nd<br>rack empty
 +
! 3rd<br>rack empty*
 +
! 4th<br>rack empty*
 +
! 5th<br>rack empty*
 +
! Visual<br>discrepancy
 +
|-
 +
| '''56''' || 45&nbsp;''(+11)'' || 34&nbsp;''(+22)'' || 16&nbsp;''(+40)'' || 10&nbsp;''(+46)'' || 1&nbsp;''(+55)'' || No
 +
|-
 +
|}
 +
'''Notes''':
 +
 
 +
* Shells are modelled individually and disappear after having been shot or loaded.
 +
* The 3rd, 4th and 5th Racks serve as First-Stage ammo stowage (33 shells total).
  
 
=== Machine guns ===
 
=== Machine guns ===
−
''Offensive and anti-aircraft machine guns not only allow you to fight some aircraft but also are effective against lightly armoured vehicles. Evaluate machine guns and give recommendations on its use.''
+
{{Specs-Tank-Weapon|2}}
 +
{{Specs-Tank-Weapon|3}}
 +
{{Specs-Tank-Weapon|4}}
 +
<!-- ''Offensive and anti-aircraft machine guns not only allow you to fight some aircraft but also are effective against lightly armoured vehicles. Evaluate machine guns and give recommendations on its use.'' -->
 +
{{main|M2HB (12.7 mm)|M240 (7.62 mm)}}
 +
 
 +
{| class="wikitable" style="text-align:center" width="50%"
 +
|-
 +
! colspan="5" | [[M2HB (12.7 mm)|12.7 mm M2HB]]
 +
|-
 +
! Mount !! Capacity (Belt) !! Fire rate !! Vertical !! Horizontal
 +
|-
 +
| Commander's cupola || 1,000 (200) || 577 || -9°/+65° || ±180°
 +
|-
 +
|}
 +
{| class="wikitable" style="text-align:center" width="50%"
 +
|-
 +
! colspan="5" | [[M240 (7.62 mm)|7.62 mm M240]]
 +
|-
 +
! Mount !! Capacity (Belt) !! Fire rate !! Vertical !! Horizontal
 +
|-
 +
| Loader's cupola || 3,000 (200) || 941 || -9°/+65° || -77°/+135°
 +
|-
 +
| Coaxial || 3,000 (200) || 941 || N/A || N/A
 +
|-
 +
|}
  
 
== Usage in battles ==
 
== Usage in battles ==
−
<!--''Describe the tactics of playing in the vehicle, the features of using vehicles in the team and advice on tactics. Refrain from creating a "guide" - do not impose a single point of view but instead give the reader food for thought. Describe the most dangerous enemies and give recommendations on fighting them. If necessary, note the specifics of the game in different modes (AB, RB, SB).''-->
+
<!-- ''Describe the tactics of playing in the vehicle, the features of using vehicles in the team and advice on tactics. Refrain from creating a "guide" - do not impose a single point of view but instead give the reader food for thought. Describe the most dangerous enemies and give recommendations on fighting them. If necessary, note the specifics of the game in different modes (AB, RB, SB).'' -->
  
−
Like most Chinese MBTs, the CM11 should be played in a laid back, cautious manner since its firepower is good but its speed is not nearly sufficient for flanking quickly and catching enemies by surprise. Unfortunately its poor armour and large profile make hull-down sniping difficult, though it does enjoy better gun depression than most PRC/Soviet tanks. It is best to stay close to cover and observe the environment. When the enemies are spotted, pop out, shoot first, and try to at least cripple them. The DM63 APFSDS has very good penetration for a 105 mm round and the fast reload time ensures rapid follow-up shots. If the teammates do a good job distracting the enemy team or the CM11 somehow manage to flank successfully, the CM11 can potentially knock out several targets in rapid succession. Make good use of the thermal optics, as not all tanks at its battle rating feature them and those optics can come as a great advantage.
+
Like most MBTs in the Chinese tech tree, the CM11 should be played in a laid back, cautious manner since its firepower is good but its speed is not nearly sufficient for flanking quickly and catching enemies by surprise. Unfortunately, its poor armour and large profile make hull-down sniping difficult, though it does enjoy better gun depression than most PRC/Soviet tanks. It is best to stay close to cover and observe the environment. When the enemies are spotted, pop out, shoot first, and try to at least cripple them. The DM63 APFSDS has very good penetration for a 105 mm round, easily penetrating almost all targets that the CM11 is likely to encounter. The fast reload time ensures rapid follow-up shots. If the teammates do a good job distracting the enemy team or the CM11 somehow manages to flank successfully, several targets can be knocked out in rapid succession. Make good use of the thermal optics, as not all tanks at its battle rating feature them and they are very advantageous for spotting enemies early.
  
−
As a whole, the CM11 is somewhat like a tank destroyer, having a powerful gun but not much else. In a meta favoring high speed and high protection, it is rather out of place, but it can still work decently in the hands of a skilled player.
+
As a whole, the CM11 is somewhat like a tank destroyer, having a powerful gun but not much else. In a meta favouring high speed and high protection, it is rather out of place, but it can still work in the hands of a skilled player with good aim and reflexes. Trust the DM63 APFSDS, stay alert, shoot first, and avoid getting shot in return.
  
 
=== Pros and cons ===
 
=== Pros and cons ===
−
<!--''Summarise and briefly evaluate the vehicle in terms of its characteristics and combat effectiveness. Mark its pros and cons in a bulleted list. Try not to use more than 6 points for each of the characteristics. Avoid using categorical definitions such as "bad", "good" and the like - use substitutions with softer forms such as "inadequate" and "effective".''-->
+
<!-- ''Summarise and briefly evaluate the vehicle in terms of its characteristics and combat effectiveness. Mark its pros and cons in a bulleted list. Try not to use more than 6 points for each of the characteristics. Avoid using categorical definitions such as "bad", "good" and the like - use substitutions with softer forms such as "inadequate" and "effective".'' -->
  
 
'''Pros:'''
 
'''Pros:'''
 +
 
* Access to powerful DM63 APFSDS
 
* Access to powerful DM63 APFSDS
 
* Fast reload, topping out at 5 seconds like the [[M1 Abrams]]
 
* Fast reload, topping out at 5 seconds like the [[M1 Abrams]]
−
* Heavy ERA coverage grants decent resistance to chemical munitions
+
* Heavy ERA coverage, decent resistance to chemical rounds
−
* Has a thermal sight
+
* Has a thermal sight for the gunner
−
* Low-profile cupola, the infamous Patton cupola weakspot is less of an issue
+
* Low-profile cupola
−
* Stock M735 APFSDS
+
* Better gun-handling than contemporary PLA tanks - better gun depression and the gun is quicker to elevate and depress
  
 
'''Cons:'''
 
'''Cons:'''
 +
 
* Large target
 
* Large target
 
* Poor mobility
 
* Poor mobility
 
* ERA has negligible kinetic protection
 
* ERA has negligible kinetic protection
−
* Base armour is no better than the original M60/M48, vulnerable to sabot rounds common at its rank
+
* Vulnerable to APFSDS rounds
 +
* At 9.0 and up the M60 chassis is starting to show its age - unremarkable armour and low reactive mobility
  
 
== History ==
 
== History ==
−
<!--Describe the history of the creation and combat usage of the vehicle in more detail than in the introduction. If the historical reference turns out to be too long, take it to a separate article, taking a link to the article about the vehicle and adding a block "/History" (example: <nowiki>https://wiki.warthunder.com/(Vehicle-name)/History</nowiki>) and add a link to it here using the <code>main</code> template. Be sure to reference text and sources by using <code><nowiki><ref></ref></nowiki></code>, as well as adding them at the end of the article with <code><nowiki><references /></nowiki></code>. This section may also include the vehicle's dev blog entry (if applicable) and the in-game encyclopedia description (under <code><nowiki>=== In-game description ===</nowiki></code>, also if applicable).-->
+
<!-- ''Describe the history of the creation and combat usage of the vehicle in more detail than in the introduction. If the historical reference turns out to be too long, take it to a separate article, taking a link to the article about the vehicle and adding a block "/History" (example: <nowiki>https://wiki.warthunder.com/(Vehicle-name)/History</nowiki>) and add a link to it here using the <code>main</code> template. Be sure to reference text and sources by using <code><nowiki><ref></ref></nowiki></code>, as well as adding them at the end of the article with <code><nowiki><references /></nowiki></code>. This section may also include the vehicle's dev blog entry (if applicable) and the in-game encyclopedia description (under <code><nowiki>=== In-game description ===</nowiki></code>, also if applicable).'' -->
 +
=== Development ===
 +
In 1980, the Republic of China (ROC), also known as Taiwan, created the Armoured Vehicle Development Center. It was created partially to develop the CM-11 tank. The Republic of China Army (ROCA) needed a 2nd generation main battle tank (MBT), and they wanted to acquire one without breaking any limitations placed on the ROC by the US-PRC Joint Communique. As such, they decided to create a hybrid design using the M48A3 turret and the M60A3 hull. In the ROC, it is known as the CM-11 Brave Tiger, whereas the United States designated it as the M48H for "M48 Hybrid". To create the tank, the ROC imported M60A3 hulls from the United States along with M68A1 105 mm cannons and M48A3 turrets, and commander cupolas from Israel. Two prototypes were finished in 1988 and the ROCA ordered 450 CM-11 tanks.
 +
 
 +
=== Design ===
 +
The hull of the CM-11 is from the M60A3 tank built in the US. As such, the CM-11 uses a torsion bar suspension system and is powered by a Continental AVDS-1790-2C diesel engine producing 750 hp. The turret is from the M48A3 tank, but with the Israeli Urdan style commander's cupola with a low profile. The armament consists of an M68A1 105 mm cannon, the commander's 12.7 mm (.50 in) M2 Browning machine gun, a coaxial 7.62 mm M240 machine gun, and the loader's 7.62 mm M240 machine gun. The fire control system is the same system as used by the M1 Abrams, and the M68A1 has a two-plane stabilizer. The optics and thermal imaging are also as modern as those on the M1 Abrams, giving the CM-11 night fighting and fire-on-the-move ability. The design has a number of drawbacks though, as the Patton design of the 1960s has become outdated. The main battle tanks of the People's Liberation Army (PLA) are the 2nd generation ZTZ96 and 3rd generation ZTZ99, which mount a 125 mm gun that can reliably penetrate the armour of the CM-11. To counter this, it was attempted to put explosive reactive armour (ERA) from the French company GIAT on the CM-11, but that would tax the suspension too much, so the idea was dropped. In 2012, a CM-11 was seen at an exercise mounting ERA designed by CSIST, which featured extreme angles to increase the chance of enemy shells deflecting off of the armour.
 +
 
 +
=== Production and Service ===
 +
After the failed attempt by the ROC Army to purchase M48A5 and "Magach III" tanks from Spain, South Africa and Israel, the imitation and transformation project for a new tank was launched again in 1984. The ROC Army's tank research and development center and General Dynamics jointly designed a second-generation main battle tank "Brave Tiger", designated as M48H (or CM11 later).
 +
 
 +
The "Brave Tiger" MBT is a hybrid of an enhanced M48 turret and an M60 chassis, equipped with a cutting-edge FCS that comes from the M1 Abrams. Therefore, "Brave Tiger" was designated as M48H (H for Hybrid). The Army Fighting Vehicle R&D Center purchased 450 M60 tank chassis for modification before the M60 production line shut down. The "Brave Tiger" tank began testing in 1988. It officially entered service in the ROC Army on April 14th, 1990.
 +
 
 +
The Army Ordnance Industry Development Center transformed a total number of 550 turrets. After 450 M48H tanks were assembled on the CM11 "Brave Tiger", the remaining 100 turrets were assigned to the old M48A3 tanks. These upgraded M48A3 tanks are known as CM12 MBTs. The Army Ordnance Industry Development Center continued to carry out the transformation of the M48A3 tank, and a total of 250 CM12 tanks were produced.
 +
 
 +
After the Taiwan Strait Missile Crisis in 1996, in order to curb the PRC's attempt to invade Taiwan by force, the United States sold 450 M60A3 tanks to the Republic of China. At the present time, the armoured combat forces of the Republic of China Army are mainly equipped with CM11 "Brave Tiger" MBTs and M60A3 MBTs. Due to lack of reliability, most of the CM12 tanks are stored as reserve forces.
 +
 
 +
=== [[wt:en/news/6366-development-cm11-when-old-meets-new-en|Devblog]] ===
 
During the 1980s, armed forces in Taiwan were looking for more capable AFVs. However, as some existing agreements with the USA prevented the supply with more advanced US equipment, such as later versions of the M60 and the newer M1 Abrams tanks, military production was forced to develop an indigenous design.
 
During the 1980s, armed forces in Taiwan were looking for more capable AFVs. However, as some existing agreements with the USA prevented the supply with more advanced US equipment, such as later versions of the M60 and the newer M1 Abrams tanks, military production was forced to develop an indigenous design.
  
−
While still retaining access to supplies of older US equipment and components, the decision was made to create a hybrid tank from the available components and outfit it with the latest electronics. As such, Taiwanese engineers took the hull and chassis of the M60A3 and combined it with the turret of the M48, while installing the M68A1 105mm cannon and the latest US fire control systems available.
+
While still retaining access to supplies of older US equipment and components, the decision was made to create a hybrid tank from the available components and outfit it with the latest electronics. As such, Taiwanese engineers took the hull and chassis of the M60A3 and combined it with the turret of the M48, while installing the M68A1 105 mm cannon and the latest US fire control systems available.
  
 
The result of this undertaking was the CM11. In the late 1980s, two prototypes were sent to the US for comparative tests against the M60A3, where the CM11 outperformed its counterpart in gunnery trials. Shortly after these successful tests, the CM11 officially entered service in 1990.
 
The result of this undertaking was the CM11. In the late 1980s, two prototypes were sent to the US for comparative tests against the M60A3, where the CM11 outperformed its counterpart in gunnery trials. Shortly after these successful tests, the CM11 officially entered service in 1990.
  
−
However, as the protection was seen to be somewhat lacking, the decision was made to upgrade the CM11 with ERA packages obtained from GIAT in the early ‘90s. Due to substantial weight increases and associated upgrade costs however, this modernization effort was only applied to about a dozen vehicles. In total, 450 CM11s were built for the armed forces, still representing the spearhead of the country’s armored units today.
+
However, as the protection was seen to be somewhat lacking, the decision was made to upgrade the CM11 with ERA packages obtained from GIAT in the early '90s. Due to substantial weight increases and associated upgrade costs however, this modernization effort was only applied to about a dozen vehicles. In total, 450 CM11s were built for the armed forces, still representing the spearhead of the country's armoured units today.
 +
 
 +
== Media ==
 +
<!-- ''Excellent additions to the article would be video guides, screenshots from the game, and photos.'' -->
 +
 
 +
;Skins
  
−
''- From [[wt:en/news/6366-development-cm11-when-old-meets-new-en|Devblog]]''
+
* [https://live.warthunder.com/feed/camouflages/?vehicle=cn_cm11 Skins and camouflages for the {{PAGENAME}} from live.warthunder.com.]
  
−
== Media ==
+
;Videos
−
''Excellent additions to the article would be video guides, screenshots from the game, and photos.''
+
{{Youtube-gallery|Xwid3UCLr5U|'''The Patton Family''' discusses the {{PAGENAME}} at 7:59 - ''War Thunder Official Channel''|zoBPU0n65_A|'''The M60 family''' discusses the {{PAGENAME}} at 5:05 - ''War Thunder Official Channel''}}
  
 
== See also ==
 
== See also ==
−
''Links to the articles on the War Thunder Wiki that you think will be useful for the reader, for example:''
+
<!-- ''Links to the articles on the War Thunder Wiki that you think will be useful for the reader, for example:''
 
* ''reference to the series of the vehicles;''
 
* ''reference to the series of the vehicles;''
−
* ''links to approximate analogues of other nations and research trees.''
+
* ''links to approximate analogues of other nations and research trees.'' -->
 +
 
 +
;Related development
 +
 
 +
* [[M48 Patton (Family)]]
 +
* [[M60 (Family)]]
  
 
== External links ==
 
== External links ==
−
''Paste links to sources and external resources, such as:''
+
<!-- ''Paste links to sources and external resources, such as:''
 
* ''topic on the official game forum;''
 
* ''topic on the official game forum;''
−
* ''encyclopedia page on the tank;''
+
* ''other literature.'' -->
−
* ''other literature.''
+
 
 +
* [[wt:en/news/6366-development-cm11-when-old-meets-new-en|[Devblog] CM11: When Old Meets New]]
  
 +
{{TankManufacturer Ordnance Research Development Center}}
 
{{China medium tanks}}
 
{{China medium tanks}}

Latest revision as of 17:55, 28 October 2023

Rank VI USSR | Premium | Golden Eagles
Su-25K Pack
CM11
cn_cm11.png
GarageImage CM11.jpg
CM11
China flag.png China
VI Rank
Battle rating:
AB RB SB
9.3 9.3 9.3
Class:
Research:220 000 Specs-Card-Exp.png
Purchase:620 000 Specs-Card-Lion.png
Show in game

Description

The CM11, also known as the M48H (Hybrid) and commonly referred to as "勇虎" (Brave Tiger), has served as the MBT of the ROCA since the 1990s. The decision to acquire new tanks arose from the need to replace the ageing fleet of M48A1s. In the late 1980s, the ROCA purchased several hundred M60A3 TTS, and plans were made to upgrade the existing fleet of Pattons by utilizing spare hulls obtained from the United States. The result was a hybrid tank, combining an M60A3 hull, M48A5 turret, and an M1 Abrams-equivalent FCS. Additionally, some spare M48A5 turrets were mounted on a few dozen M48A1s, resulting in the CM12 variant. The initial batches of these hybrid tanks became the spearhead of the ROCA's armored corps, particularly intended to counter potential PLA landing operations. The CM11 has faithfully served for over three decades, but may soon be replaced by the M1A2T from the United States. This particular representation of the CM11 is equipped with an experimental French GIAT ERA package, providing enhanced protection against chemical shells.

Introduced in Update 1.91 "Night Vision", the CM11 is a Taiwanese upgrade to the M60A3, and is currently the most modern tank in active service with the Republic of China Army. It is a mating of the M60 chassis with the turret from the M48 Patton, with a unique pagoda-like ERA array on the turret sides. Though its mobility and kinetic protection are poor, it has the same 105 mm gun as the M1 Abrams, so if used carefully, the CM11 can do some serious damage with its thermal sight and powerful DM63 APFSDS.

General info

Survivability and armour

ERA
Effective action against the cumulative ammunition
Smoke grenades
Creation of a smoke screen in front of the vehicle
ESS
Creation of a smoke screen in the direction of movement of the vehicle
Armourfront / side / back
Hull108 / 70 / 40
Turret130 / 76 / 51
Crew4 people
Visibility115 %

The CM11 combines the hull of an M60 Patton with the turret of an M48 Patton, and as such, the base turret and hull armour are mostly identical to these two tanks, respectively. The M48's bulbous cupola has been replaced with a low-profile version. The armour is quite resistant to APHE rounds and autocannons, but the vast majority of opponents at its rank use HEATFS and APFSDS rounds that can cut through steel like butter. To counter the former, the CM11 is slathered with ERA and can generally survive the first shot from most HEATFS rounds. However, the ERA offers close to no protection against APFSDS rounds, which are the round of choice in top rank battles.

Post-penetration survivability is also questionable. It lacks blowout racks and ammunition is scattered around the tank, so successful penetrations can reduce the CM11 to a fiery grave.

Armour type:

  • Cast homogeneous armour
  • Rolled homogeneous armour (Rear roof, Engine grille)
  • Structural steel (Spaced armour)
Armour Front Sides Rear Roof
Hull 108 mm (66°) Front Glacis
137 mm (55°) Lower Glacis		 36 - 70 mm 25 mm (1°) Engine Grille
40 mm (31°) Top
28 mm (61°) Bottom 		36 mm Front
20 mm Engine deck
Turret 140-240 mm (Variable thickness, 12-76°) Turret front
152 mm (25-30°) Gun mantlet 		69-100 mm (12-36°) 51-55 mm (2-71°) 25-69 mm
Cupola 25.4 mm (18-67°)
Explosive reactive armour Front (Slope angle) Sides
Hull Upper glacis:
5 mm Kinetic / 370 mm Chemical
Lower glacis:
5 mm Kinetic / 370 mm Chemical
Fenders:
5 mm Kinetic / 370 mm Chemical
Turret Gun mantlet:
5 mm Kinetic / 370 mm Chemical
Cheeks:
5 mm Kinetic / 370 mm Chemical 		Cheeks:
5 mm Kinetic / 370 mm Chemical

Notes:

  • Tracks are 20 mm thick while suspension wheels are 20 mm thick.
  • Belly armour is 19 mm in the front, 13 mm in the rear.
  • There are several blocks of spaced armour on the fenders and turret that are 4 mm thick.

Mobility

Speedforward / back
AB53 / 13 km/h
RB and SB48 / 12 km/h
Number of gears6 forward
2 back
Weight54.0 t
Engine power
AB1 431 hp
RB and SB750 hp
Power-to-weight ratio
AB26.5 hp/t
RB and SB13.9 hp/t
Game Mode Max Speed (km/h) Weight (tons) Engine power (horsepower) Power-to-weight ratio (hp/ton)
Forward Reverse Stock Upgraded Stock Upgraded
Arcade 53 13 54 1,162 1,431 21.52 26.5
Realistic 48 12 663 750 12.28 13.89

The CM11's mobility is below average compared to its contemporaries. It weighs practically the same as the M1 Abrams while having less than half of the engine power. It is very slightly more mobile than the Chieftain Mk 10, but that is a very low bar, and unlike the Chieftain it does not have strong armour to make up for it. Expect to be among the last to arrive on the battlefield.

Modifications and economy

Repair costBasic → Reference
AB3 965 → 6 260 Sl icon.png
RB4 029 → 6 361 Sl icon.png
SB5 149 → 8 130 Sl icon.png
Total cost of modifications186 300 Rp icon.png
307 000 Sl icon.png
Talisman cost2 700 Ge icon.png
Crew training175 000 Sl icon.png
Experts620 000 Sl icon.png
Aces2 100 Ge icon.png
Research Aces1 010 000 Rp icon.png
Reward for battleAB / RB / SB
160 / 200 / 240 % Sl icon.png
226 / 226 / 226 % Rp icon.png
Modifications
Mobility Protection Firepower
Mods new tank traks.png
Tracks
Research:
7 800 Rp icon.png
Cost:
12 000 Sl icon.png
310 Ge icon.png
Mods new tank suspension.png
Suspension
Research:
8 800 Rp icon.png
Cost:
14 000 Sl icon.png
350 Ge icon.png
Mods new tank break.png
Brake System
Research:
8 800 Rp icon.png
Cost:
14 000 Sl icon.png
350 Ge icon.png
Mods new tank filter.png
Filters
Research:
9 800 Rp icon.png
Cost:
15 000 Sl icon.png
390 Ge icon.png
Mods new tank transmission.png
Transmission
Research:
11 000 Rp icon.png
Cost:
17 000 Sl icon.png
440 Ge icon.png
Mods new tank engine.png
Engine
Research:
11 000 Rp icon.png
Cost:
17 000 Sl icon.png
440 Ge icon.png
Mods tank tool kit.png
Improved Parts
Research:
2 300 Rp icon.png
Cost:
12 000 Sl icon.png
310 Ge icon.png
Mods extinguisher.png
Improved FPE
Research:
2 600 Rp icon.png
Cost:
14 000 Sl icon.png
350 Ge icon.png
Mods tank reinforcement cn.png
Crew Replenishment
Research:
9 800 Rp icon.png
Cost:
15 000 Sl icon.png
390 Ge icon.png
Mods engine smoke screen system.png
ESS
Research:
11 000 Rp icon.png
Cost:
17 000 Sl icon.png
440 Ge icon.png
Mods new tank horizontal aiming.png
Horizontal Drive
Research:
7 800 Rp icon.png
Cost:
12 000 Sl icon.png
310 Ge icon.png
Mods tank ammo.png
105mm_usa_HESH_ammo_pack
Research:
7 800 Rp icon.png
Cost:
12 000 Sl icon.png
310 Ge icon.png
Mods tank ammo.png
105mm_NATO_APDS_FS_ammo_pack
Research:
7 800 Rp icon.png
Cost:
12 000 Sl icon.png
310 Ge icon.png
Mods tank cannon.png
Adjustment of Fire
Research:
8 800 Rp icon.png
Cost:
14 000 Sl icon.png
350 Ge icon.png
Mods tank ammo.png
105mm_us_M416_Smoke_ammo_pack
Research:
8 800 Rp icon.png
Cost:
14 000 Sl icon.png
350 Ge icon.png
Mods new tank vertical aiming.png
Elevation Mechanism
Research:
9 800 Rp icon.png
Cost:
15 000 Sl icon.png
390 Ge icon.png
Mods smoke screen.png
Smoke grenade
Research:
9 800 Rp icon.png
Cost:
15 000 Sl icon.png
390 Ge icon.png
Mods thermal sight.png
NVD
Research:
9 800 Rp icon.png
Cost:
15 000 Sl icon.png
390 Ge icon.png
Mods art support.png
Artillery Support
Research:
11 000 Rp icon.png
Cost:
17 000 Sl icon.png
440 Ge icon.png
Mods tank ammo.png
105mm_DM63_APDS_FS_ammo_pack
Research:
11 000 Rp icon.png
Cost:
17 000 Sl icon.png
440 Ge icon.png
Mods tank laser rangefinder.png
Laser rangefinder
Research:
11 000 Rp icon.png
Cost:
17 000 Sl icon.png
440 Ge icon.png

Armaments

Laser rangefinder
Reduces the error and increases the maximum measurable distance of the rangefinder
Night vision device
Improves visibility by enhancing natural light or active illumination.
Thermal imager
Allows to see thermal radiation in the infrared range day and night

Main armament

105 mm M68A1 cannon
Two-plane stabilizer
Reduces the swing of the gun in two planes while moving
Ammunition56 rounds
First-order33 rounds
Reloadbasic crew → aces
6.5 → 5.0 s
Vertical guidance-9° / 19°
Main article: M68A1 (105 mm)

The M68A1 is the same gun used by the M1 Abrams. It enjoys a quicker reload that tops out at 5 seconds. The gun handling is otherwise identical to the M60A3 TTS, which is not great but still better than typical Soviet tanks.

105 mm M68A1 Turret rotation speed (°/s) Reloading rate (seconds)
Mode Capacity Vertical Horizontal Stabilizer Stock Upgraded Full Expert Aced Stock Full Expert Aced
Arcade 56 -9°/+19° ±180° Two-plane 22.8 31.6 38.4 42.5 45.2 6.50 5.75 5.30 5.00
Realistic 14.3 16.8 20.4 22.6 24.0

Ammunition

The stock M456 HEATFS is a standard 105 mm HEATFS round with 400 mm of penetration at any distance. At the CM11's battle rating, it is possible to face tanks with reactive or composite armour that can nullify the penetration. It will go clean through conventional armour and weaker implementations of spaced armour. While it becomes less useful for anti-tank duties after APFSDS is unlocked, it is worth keeping a few on hand for destroying light targets.

The M735 APFSDS round is a fairly good and reliable option. The high muzzle velocity makes it much easier to use than the HEATFS. The angled penetration of ~160 mm at 60 degrees leaves something to be desired, but most of the opponents that the CM11 will face are not heavily protected. M735 is sufficient against any enemy tank that does not have composite armour. MBTs with weaker composite armour like the XM-1 (GM) or M48 Super are still vulnerable. The MBT-70 and KPz-70 can resist M735 on the outer portions of their turret cheeks despite only having spaced armour.

The M393A2 HESH round is even more effective against light targets but has bad ballistics and low penetration. It can also be neutralized by spaced armour in addition to reactive and composite. The wide cone of damage may be helpful once in a while, so it does not hurt to take a handful, but it will generally not be useful.

For tougher targets, the unlockable DM63 APFSDS round will rarely disappoint. It has the second-highest penetration of any 105 mm APFSDS round currently in the game, exceeding 430 mm of flat penetration. This is actually enough to penetrate some portions of the M1 Abrams's turret. However, it is overkill against most tanks the CM11 will encounter. Tanks to watch out for include the Chieftain Mk 10, Challenger Mk.2 and Challenger Mk.3. These all feature strong composite armour on their turret cheeks that DM63 will not be able to penetrate consistently, if at all. The DM63 will comfortably penetrate their hull armour, so shoot there instead.

Penetration statistics
Ammunition Type of
warhead 		Penetration @ 0° Angle of Attack (mm)
10 m 100 m 500 m 1,000 m 1,500 m 2,000 m
M456A2 HEATFS 400 400 400 400 400 400
M393A2 HESH 127 127 127 127 127 127
M735 APFSDS 292 291 284 275 266 257
DM63 APFSDS 430 427 420 409 400 390
Shell details
Ammunition Type of
warhead 		Velocity
(m/s) 		Projectile
mass (kg) 		Fuse delay
(m) 		Fuse sensitivity
(mm) 		Explosive mass
(TNT equivalent) (kg) 		Ricochet
0% 50% 100%
M456A2 HEATFS 1,174 10.5 0.05 0.1 1.27 65° 72° 77°
M393A2 HESH 732 11.2 0.1 4 4.31 73° 77° 80°
M735 APFSDS 1,501 3.72 - - - 78° 80° 81°
DM63 APFSDS 1,455 4.4 - - - 78° 80° 81°
Smoke shell characteristics
Ammunition Velocity
(m/s) 		Projectile
mass (kg) 		Screen radius
(m) 		Screen deploy
time (s) 		Screen hold
time (s) 		Explosive mass
(TNT equivalent) (g)
M416 732 11.6 16 5 25 50

Ammo racks

Ammo racks of the CM11
Full
ammo 		1st
rack empty 		2nd
rack empty 		3rd
rack empty* 		4th
rack empty* 		5th
rack empty* 		Visual
discrepancy
56 45 (+11) 34 (+22) 16 (+40) 10 (+46) 1 (+55) No

Notes:

  • Shells are modelled individually and disappear after having been shot or loaded.
  • The 3rd, 4th and 5th Racks serve as First-Stage ammo stowage (33 shells total).

Machine guns

12.7 mm M2HB machine gun
Ammunition1 000 rounds
Belt capacity200 rounds
Reloadbasic crew → aces
10.4 → 8.0 s
Fire rate575 shots/min
Vertical guidance-9° / 65°
7.62 mm M240 machine gun
Ammunition3 000 rounds
Belt capacity200 rounds
Reloadbasic crew → aces
10.4 → 8.0 s
Fire rate941 shots/min
7.62 mm M240 machine gun (coaxial)
Ammunition3 000 rounds
Belt capacity200 rounds
Reloadbasic crew → aces
10.4 → 8.0 s
Fire rate941 shots/min
Main articles: M2HB (12.7 mm), M240 (7.62 mm)
12.7 mm M2HB
Mount Capacity (Belt) Fire rate Vertical Horizontal
Commander's cupola 1,000 (200) 577 -9°/+65° ±180°
7.62 mm M240
Mount Capacity (Belt) Fire rate Vertical Horizontal
Loader's cupola 3,000 (200) 941 -9°/+65° -77°/+135°
Coaxial 3,000 (200) 941 N/A N/A

Usage in battles

Like most MBTs in the Chinese tech tree, the CM11 should be played in a laid back, cautious manner since its firepower is good but its speed is not nearly sufficient for flanking quickly and catching enemies by surprise. Unfortunately, its poor armour and large profile make hull-down sniping difficult, though it does enjoy better gun depression than most PRC/Soviet tanks. It is best to stay close to cover and observe the environment. When the enemies are spotted, pop out, shoot first, and try to at least cripple them. The DM63 APFSDS has very good penetration for a 105 mm round, easily penetrating almost all targets that the CM11 is likely to encounter. The fast reload time ensures rapid follow-up shots. If the teammates do a good job distracting the enemy team or the CM11 somehow manages to flank successfully, several targets can be knocked out in rapid succession. Make good use of the thermal optics, as not all tanks at its battle rating feature them and they are very advantageous for spotting enemies early.

As a whole, the CM11 is somewhat like a tank destroyer, having a powerful gun but not much else. In a meta favouring high speed and high protection, it is rather out of place, but it can still work in the hands of a skilled player with good aim and reflexes. Trust the DM63 APFSDS, stay alert, shoot first, and avoid getting shot in return.

Pros and cons

Pros:

  • Access to powerful DM63 APFSDS
  • Fast reload, topping out at 5 seconds like the M1 Abrams
  • Heavy ERA coverage, decent resistance to chemical rounds
  • Has a thermal sight for the gunner
  • Low-profile cupola
  • Better gun-handling than contemporary PLA tanks - better gun depression and the gun is quicker to elevate and depress

Cons:

  • Large target
  • Poor mobility
  • ERA has negligible kinetic protection
  • Vulnerable to APFSDS rounds
  • At 9.0 and up the M60 chassis is starting to show its age - unremarkable armour and low reactive mobility

History

Development

In 1980, the Republic of China (ROC), also known as Taiwan, created the Armoured Vehicle Development Center. It was created partially to develop the CM-11 tank. The Republic of China Army (ROCA) needed a 2nd generation main battle tank (MBT), and they wanted to acquire one without breaking any limitations placed on the ROC by the US-PRC Joint Communique. As such, they decided to create a hybrid design using the M48A3 turret and the M60A3 hull. In the ROC, it is known as the CM-11 Brave Tiger, whereas the United States designated it as the M48H for "M48 Hybrid". To create the tank, the ROC imported M60A3 hulls from the United States along with M68A1 105 mm cannons and M48A3 turrets, and commander cupolas from Israel. Two prototypes were finished in 1988 and the ROCA ordered 450 CM-11 tanks.

Design

The hull of the CM-11 is from the M60A3 tank built in the US. As such, the CM-11 uses a torsion bar suspension system and is powered by a Continental AVDS-1790-2C diesel engine producing 750 hp. The turret is from the M48A3 tank, but with the Israeli Urdan style commander's cupola with a low profile. The armament consists of an M68A1 105 mm cannon, the commander's 12.7 mm (.50 in) M2 Browning machine gun, a coaxial 7.62 mm M240 machine gun, and the loader's 7.62 mm M240 machine gun. The fire control system is the same system as used by the M1 Abrams, and the M68A1 has a two-plane stabilizer. The optics and thermal imaging are also as modern as those on the M1 Abrams, giving the CM-11 night fighting and fire-on-the-move ability. The design has a number of drawbacks though, as the Patton design of the 1960s has become outdated. The main battle tanks of the People's Liberation Army (PLA) are the 2nd generation ZTZ96 and 3rd generation ZTZ99, which mount a 125 mm gun that can reliably penetrate the armour of the CM-11. To counter this, it was attempted to put explosive reactive armour (ERA) from the French company GIAT on the CM-11, but that would tax the suspension too much, so the idea was dropped. In 2012, a CM-11 was seen at an exercise mounting ERA designed by CSIST, which featured extreme angles to increase the chance of enemy shells deflecting off of the armour.

Production and Service

After the failed attempt by the ROC Army to purchase M48A5 and "Magach III" tanks from Spain, South Africa and Israel, the imitation and transformation project for a new tank was launched again in 1984. The ROC Army's tank research and development center and General Dynamics jointly designed a second-generation main battle tank "Brave Tiger", designated as M48H (or CM11 later).

The "Brave Tiger" MBT is a hybrid of an enhanced M48 turret and an M60 chassis, equipped with a cutting-edge FCS that comes from the M1 Abrams. Therefore, "Brave Tiger" was designated as M48H (H for Hybrid). The Army Fighting Vehicle R&D Center purchased 450 M60 tank chassis for modification before the M60 production line shut down. The "Brave Tiger" tank began testing in 1988. It officially entered service in the ROC Army on April 14th, 1990.

The Army Ordnance Industry Development Center transformed a total number of 550 turrets. After 450 M48H tanks were assembled on the CM11 "Brave Tiger", the remaining 100 turrets were assigned to the old M48A3 tanks. These upgraded M48A3 tanks are known as CM12 MBTs. The Army Ordnance Industry Development Center continued to carry out the transformation of the M48A3 tank, and a total of 250 CM12 tanks were produced.

After the Taiwan Strait Missile Crisis in 1996, in order to curb the PRC's attempt to invade Taiwan by force, the United States sold 450 M60A3 tanks to the Republic of China. At the present time, the armoured combat forces of the Republic of China Army are mainly equipped with CM11 "Brave Tiger" MBTs and M60A3 MBTs. Due to lack of reliability, most of the CM12 tanks are stored as reserve forces.

Devblog

During the 1980s, armed forces in Taiwan were looking for more capable AFVs. However, as some existing agreements with the USA prevented the supply with more advanced US equipment, such as later versions of the M60 and the newer M1 Abrams tanks, military production was forced to develop an indigenous design.

While still retaining access to supplies of older US equipment and components, the decision was made to create a hybrid tank from the available components and outfit it with the latest electronics. As such, Taiwanese engineers took the hull and chassis of the M60A3 and combined it with the turret of the M48, while installing the M68A1 105 mm cannon and the latest US fire control systems available.

The result of this undertaking was the CM11. In the late 1980s, two prototypes were sent to the US for comparative tests against the M60A3, where the CM11 outperformed its counterpart in gunnery trials. Shortly after these successful tests, the CM11 officially entered service in 1990.

However, as the protection was seen to be somewhat lacking, the decision was made to upgrade the CM11 with ERA packages obtained from GIAT in the early '90s. Due to substantial weight increases and associated upgrade costs however, this modernization effort was only applied to about a dozen vehicles. In total, 450 CM11s were built for the armed forces, still representing the spearhead of the country's armoured units today.

Media

Skins
Videos
The Patton Family discusses the CM11 at 7:59 - War Thunder Official Channel
The M60 family discusses the CM11 at 5:05 - War Thunder Official Channel

See also

Related development

External links


Ordnance Research Development Center, ROCA (陸軍兵工整備發展中心)
Light tanks  M41D · M64
Medium tanks  CM11
Tank destroyers  CM25

China medium tanks
ZTZ59  Type 59 · ZTZ59A · ZTZ59D1
ZTZ69  Type 69 · Type 69-IIa
ZTZ88/96  ZTZ88A · ZTZ88B
  ZTZ96 · ZTZ96A · ZTZ96A (P)
ZTZ99  ZTZ99-II · ZTZ99-III
ZTZ99A  ZTZ99A · WZ1001(E) LCT
Export series  MBT-2000 · VT4A1
ROC  CM11
Other  Т-34-85 Gai · Object 122MT "MC"
Bangladesh  T-69 II G
Japan  ␗Chi-Ha · ␗Chi-Ha Kai
Pakistan  Al-Khalid-I
USA  ␗M4A4 · ␗M4A4 (1st PTG) · ␗M4A1 (75) W · ␗M48A1 · ␗M60A3 TTS
USSR  ␗T-34 (1943) · ␗Т-34-85 (S-53) · T-34-85 No.215 · Т-62 №545

Retrieved from "https://wiki.warthunder.com/index.php?title=CM11&oldid=175494"