M46

M46

M26

M47

M46

M26

M47

USA

IV Rank

Battle rating:

AB	RB	SB
7.0	7.0	6.7

Class:

Medium tank

Research:71 000

Purchase:210 000

Show in game

This page is about the American medium tank M46. For the premium version, see M46 "Tiger".

Description

The Medium Tank M46 Patton is a rank IV American medium tank with a battle rating of 7.0 (AB/RB) and 6.7 (SB). It was one of the first American tanks to be released with the American ground tree in Update 1.45 "Steel Generals". As an upgraded version of the M26 Pershing, it features many similarities to its predecessors but is improved with a better gun and engine for increased firepower and mobility.

General info

Survivability and armour

Armour type:

• Cast homogeneous armour (Turret, Front)
• Rolled homogeneous armour (Side, Rear, Roof)

Armour	Front (Slope angle)	Sides	Rear	Roof
Hull	101.6 mm (42-46°) Front Glacis 162.5 mm (25-60°) Upper front glacis 76.2 mm (26-53°) Lower Glacis	76.2 mm Front 50.8 mm (0-9°) Rear	50.8 mm Top 22.2 mm (65°) Bottom	22.2 mm
Turret	101.6 mm (1-55°) Turret front 114.3 mm (1-84°) Gun mantlet	76.2 mm (3-54°)	76.2 mm (0-79°)	25.4 mm
Armour	Sides	Roof
Cupola	76.2 mm	25.4 mm

Notes:

• Suspension wheels and tracks are 20 mm thick.
• Belly armour is 25.4 mm thick.

Mobility

Game Mode	Max Speed (km/h)		Weight (tons)		Engine power (horsepower)		Power-to-weight ratio (hp/ton)
	Forward	Reverse	Stock	AoA	Stock	Upgraded	Stock	Upgraded
Arcade	54	22	43.7	0.2	1,255	1,545	28.72	35.19
Realistic	49	20			716	810	16.38	18.45

Armaments

Main armament

90 mm M3A1					Turret rotation speed (°/s)					Reloading rate (seconds)
Mode	Capacity	Vertical	Horizontal	Stabilizer	Stock	Upgraded	Full	Expert	Aced	Stock	Full	Expert	Aced
Arcade	70	-10°/+20°	±180°	N/A	24.3	33.6	40.8	45.1	48.0	9.7	8.6	7.9	7.5
Realistic					15.2	17.9	21.7	24.0	25.5

Ammunition

Penetration statistics
Ammunition	Type of warhead	Penetration @ 0° Angle of Attack (mm)
		10 m	100 m	500 m	1,000 m	1,500 m	2,000 m
M318 shot	APBC	175	173	161	147	135	123
M71 shell	HE	13	13	13	13	13	13
M82 shot	APCBC	185	182	170	155	142	130
M304 shot	APCR	287	281	259	234	211	191
M332 shot	APCR	291	286	264	240	217	197
M348 shell	HEATFS	305	305	305	305	305	305

Shell details
Ammunition	Type of warhead	Velocity (m/s)	Projectile Mass (kg)	Fuse delay (m)	Fuse sensitivity (mm)	Explosive Mass (TNT equivalent) (g)	Ricochet
							0%	50%	100%
M318 shot	APBC	853	10.98	N/A	N/A	N/A	47°	60°	65°
M71 shell	HE	823	10.55	0.1	0.5	925	79°	80°	81°
M82 shot	APCBC	853	10.94	1.2	14.0	137.2	48°	63°	71°
M304 shot	APCR	1,021	7.62	N/A	N/A	N/A	66°	70°	72°
M332 shot	APCR	1,165	5.70	N/A	N/A	N/A	66°	70°	72°
M348 shell	HEATFS	853	6.50	N/A	0.1	926.17	65°	72°	77°

Smoke shell characteristics
Ammunition	Velocity (m/s)	Projectile Mass (kg)	Screen radius (m)	Screen deploy time (s)	Screen hold time (s)	Explosive Mass (TNT equivalent) (g)
M313	821	10.7	13	5	20	50

Ammo racks

File:Ammoracks M46Patton.png

Ammo racks of the M46

Full ammo	1st rack empty	2nd rack empty	Visual discrepancy
70	61 (+9)	1 (+69)	No

Notes:

• Ammo rack 1 is a ready rack, and takes priority in being filled at the beginning of the battle, then fills rack 2.
• Full reload speed will be realized as long as ammo exists in the ready rack. If the ready racks is empty, a penalty to reload speed will occur.
• Simply not firing when the main gun is loaded will load ammo from rack 2 into rack 1, as long as there is ammo in rack 2. Firing the main gun will interrupt the loading of the ready racks.

Machine guns

12.7 mm M2HB
Mount	Capacity (Belt)	Fire rate	Vertical	Horizontal
Pintle	1,000 (200)	577	-10°/+50°	±120°

7.62 mm M1919A4
Mount	Capacity (Belt)	Fire rate	Vertical	Horizontal
Coaxial	4,900 (250)	500	N/A	N/A

Usage in battles

The tank plays almost like the M26 Pershing, it's relatively fast for its size yet has a very powerful gun. In comparison, the M46 Patton features improved manoeuvrability with increased acceleration, it also has a better gun to combat the foes it will face at its rank. Due to this, the M46 Patton can fit into multiple roles like the Pershing as an offensive or supporting unit. Attack and flank enemy units with the cooperation of allied units to get their more vulnerable sides.

At this rank, the more heavy duty vehicles appears such as the IS-3, 10.5cm Tiger II, T32, and the Maus. These tanks are a menace to not just you, but possibly your entire team. Taking these tanks out in the M46 Patton require close cooperation with other allies in order to get around and hit them in their side armour. More powerful ammunition unlocked in later modifications may improve your attempts at destroying these beasts.

Arcade Battles

The M46 plays like a light tank in Arcade, because it can reach speeds over 50 km/h in perfect conditions. Furthermore, it's very agile - turning on the spot and maneuvering in close quarters is extremely easy. Altogether, this tank is a pleasure to play in cities in Arcade, because you can escape stand-offs and flank the enemy tank, or you may decide to bait a shot by showing your side, then instantly reversing, or you might want to just leave the encounter altogether and help out a teammate who is relatively nearby. Oh, and your agility can also help you bounce shots - just move your hull and turret around slightly if you think you will get shot.

However, the agility of the tank comes at a cost - the armour is non-existent. At 7.0 Battle Rating all tanks can penetrate you anywhere. Luckily, though, this tank usually gets down-tiered to 6.7, although 7.7 is also frequent. Overall - try not to get shot, because you're likely to be very crippled, or dead, in one-shot. If you survive, however, there's a high chance that you can either shoot back, or use your mobility to get into cover, or just run away.

Lastly, in Arcade, your gun is very effective. Use HEAT-FS rounds and the markers to try to hit as many different enemies as possible - don't try to finish them off, just go for assists. Your round is almost guaranteed to penetrate wherever you hit, and if you don't hit ammunition and one-shot a tank, you are likely to take out a crew member or two, some vital component (e.g. the gun, the transmission, the engine etc.), making it very easy for your teammates to clean-up. It is unfortunate, however, that you don't get a stabilizer, so caution has to be taken when peeking corners or driving around flanks.

Very importantly, however, you must always move around the map. In Arcade, enemies often try to focus on a single tank that is slow, or not moving, and if you can move around the map - many enemies will forget about you, or think that their teammates will cover them. Just move around, and try not to get shot!

Realistic Battles

The M46 is not as effective in Realistic, due to much slower and focused gameplay, in the sense that a spotted vehicle is often a dead vehicle. The lack of armour doesn't help you here, either, because players take longer to aim at you, reducing any chances of lucky ricochets, and most rounds will be able to penetrate the anywhere.

If you can't rely on armour, mobility comes into question, and in Realistic it is dampened. Here, the behaves much more like a general medium tank, like the Centurion or the T-34. You are mobile, and quick, but you won't be able to run away from encounters, or flank an enemy in seconds (like you can do in Arcade). Therefore, you should play much more carefully, and avoid being seen at all, which can be easily accomplished because you can still maneuver rather easily in close quarters.

In terms of gunpower, it's still very reliable, penetration-wise. However, in Realistic it is advised to take your time to learn enemy vehicles and their ammo racks, because you would want to one-shot most of your enemies (if you don't, it's harder to escape from return shots). Hence why it's advised to flank your enemies and take your time, instead of running around the map like one might do in Arcade. Luckily, HEAT-FS does tend to explode ammo racks.

In general, in Realistic, just play calm and try to create a false sense of security for the enemies. Instead of tackling someone head-on, you should retreat and let them move into your ambush, because you don't have a stabilizer, nor armour.

Modules

Tier	Mobility		Protection	Firepower
I	Tracks		Parts	M82 shot	Horizontal Drive
II	Suspension	Brake System	FPE	M304 shot	Adjustment of Fire
III	Filters		Crew Replenishment	M332 shot	Elevation Mechanism
IV	Transmission	Engine	Add-on Armor	M348 shell	Artillery Support	M313

Get Parts and FPE like the usual routine to increase the tank's survivability. After that, work towards the APCR and especially the HEATFS round at the Rank III and IV modifications to boost your firepower against the enemy at the battle rating.

Pros and cons

Pros:

• Powerful 90 mm main cannon, especially with HEATFS rounds
• Great overall mobility
• Low profile
• Neutral steering
• Rear mounted transmission
• Excellent gun depression of -10 degrees
• The additional armour (fence around turret) can fend off some HEAT and HESH shells, and even ATGMs

Cons:

• Turret ring is prone to breaking
• Elevation gear is slow
• Armour can easily be pierced by other tanks at its rank
• Struggles to penetrate many opponents from the front without HEATFS

History

Development

The M46 Patton came about around the time of the Korean War. Before that, the US Army armoured units consisted of two tanks, the venerable M4 Shermans and the newer M26 Pershings. Of the two, the Pershing was originally classified as a heavy tank as it weighed 41.7 tons compared to Sherman's 30-ton weight, but a reorganization had the M26 Pershing classified a medium tank after World War II. It proved unsuitable for the role as its mobility was unsatisfactory for that role, using the same Sherman engine, plus an unreliable transmission, to propel a vehicle ten tons heavier.

Work began in January 1948 to upgrade the Pershing's mobility with a new engine and transmission. The project was initially designated the M26E2, but as newer upgrades and more modifications are installed onto the tank, it began to feel more like a completely new design rather than a Pershing upgrade, so it was decided to give the model a completely new designation. The end result was the Pershing tank mounting the mentioned upgrades, plus a new power plant and gun with a bore evacuator to expunge propellant fumes. This model was designated the M46 Patton, named after General George S. Patton, the commander of the US Third Army and played a role in the establishment of American tank forces. The rebuilding of the tanks began in November 1949 and had 1,160 Pershings rebuilt into M46s, 800 to the standard variant and 360 to the M46A1, which had better brakes, a cooling and fire protection system, a new engine and transmission, and better electrical equipment.

Combat usage

The M46 saw combat only during the Korean War. The first batch arrived on August 8, 1950, to the 6th Tank Battalion and proved superior to the North Korean and Chinese T-34-85s. About 200 M46 Pattons arrive in Korea by the end of 1950, making up 15% of the American armoured strength, though the majority was still the M4 Shermans. By 1951, all M26 Pershings in Korea were withdrawn and replaced by the M46 Pattons, and eventually, the units with Shermans were also re-equipped with the newer tanks as well. When the armistice was finally made, ending the conflict in the Korean Peninsula, the M46 Pattons were withdrawn back to the state.

By the later parts of the 1950s, the M46 Pattons in American service still were being replaced by the newer M47 Pattons and those still in the inventory were leased for no cost to Belgium, France, and Italy for training purposes, sending American instructors to train the European crews and maintenance personnel.

In-game description

The M26, which appeared close to the end of World War II, was an excellent tank. However, power-to-weight ratio, maneuverability, and range were lacking. A special new 12-cylinder, air-cooled engine developed by Continental Motors to take care of the maneuverability issue reached 29,361 cm³, and at 2,800 rpm its 704 hp outstripped the M26's 500 hp. The 6.5-fold compression, which was large for the time, required 80 octane fuel, and the air-cooling system often overheated the engine. Giving the tank a new power plant required a replacement roof for the compartment housing the engine and transmission, resulting in the use of a single grating.

The new automatic CD-850 gearbox and steering mechanism were operated using a single lever that served both as a gearshift and steering wheel. The M46's running gear gained another small roller to keep constant tension on the tracks and prevent them from slipping between the leading wheels and rear road wheels. In addition, the front suspension points were given second shock absorbers. The tank was built for low temperatures and had water-crossing special equipment. As a result, it was heavier, though it did not suffer from reduced speed thanks to its upgraded power plant.

In 1948 the modernized tank was accepted as the M46 Patton and mass produced from 1949 through 1951. A total of 1,168 units spread across two modifications were built.

The M46 medium tank was used by US forces during the Korean War from 1950 to 1953 and also served as part of the American forces in Europe.

Media

Skins

• Skins and camouflages for the M46 from live.warthunder.com.

Videos

Top 7 off-road beasts discusses the M46 at 0:55 - War Thunder Official Channel

The Patton Family discusses the M46 at 0:29 - War Thunder Official Channel

See also

Links to the articles on the War Thunder Wiki that you think will be useful for the reader, for example:

• reference to the series of the vehicles;
• links to approximate analogues of other nations and research trees.

External links

• [Vehicle Profile] M46 Patton
• Surviving M46 Pattons (PDF)