Difference between revisions of "36 cm/45 Type 41 (356 mm)"
Jareel_Skaj (talk | contribs) m (various styling edits) |
Colok76286 (talk | contribs) (Edits) |
||
Line 2: | Line 2: | ||
<!-- ''Write an introduction to the article in 2-3 small paragraphs. Briefly tell us about the history of the development and combat using the weaponry and also about its features. Compile a list of air, ground, or naval vehicles that feature this weapon system in the game.'' --> | <!-- ''Write an introduction to the article in 2-3 small paragraphs. Briefly tell us about the history of the development and combat using the weaponry and also about its features. Compile a list of air, ground, or naval vehicles that feature this weapon system in the game.'' --> | ||
[[File:36 cm 45 Type 41 (356 mm).jpg|thumb|right|Two, twin-gun turrets on [[IJN Hyuga]]]] | [[File:36 cm 45 Type 41 (356 mm).jpg|thumb|right|Two, twin-gun turrets on [[IJN Hyuga]]]] | ||
− | + | The '''36 cm/45 Type 41''' is a Japanese 356 mm naval cannon. It is a very capable naval weapon in War Thunder, often able to take down enemy destroyers or light cruisers with a single salvo (even if only by flooding). Even the default SAP shells will penetrate everything but the heaviest armour on battleships and battlecruisers. | |
− | Like all high- | + | Like all high-calibre guns, the Type 41 is best used against large, predictable targets, as the base 39-second reload time (decreased down to 30 seconds with [[Crew skills#Gunners|crew skills]] and qualifications) makes it tricky to correct for maneuvering targets, such as destroyers or coastal vessels. These are better left for the secondary, or even anti-air guns. |
=== Vehicles equipped with this weapon === | === Vehicles equipped with this weapon === | ||
Line 24: | Line 24: | ||
! Tickness (mm) !! type !! (mm) !! type !! (mm) !! type !! (mm) !! type | ! Tickness (mm) !! type !! (mm) !! type !! (mm) !! type !! (mm) !! type | ||
|- | |- | ||
− | | [[IJN Hyuga]] || 305 || {{Annotation|RCA|Rolled cemented | + | | [[IJN Hyuga]] || 305 || {{Annotation|RCA|Rolled cemented armour}} || 203 || RCA || 115 || {{Annotation|RHA|Rolled homogeneous armour}} || 299—100 || RCA |
|- | |- | ||
| [[IJN Kongo|IJN Kongo]] || 254 || RCA || 254 || RCA || 152 || RCA || 229 || RCA | | [[IJN Kongo|IJN Kongo]] || 254 || RCA || 254 || RCA || 152 || RCA || 229 || RCA | ||
|- | |- | ||
|} | |} | ||
− | 36 cm/45 Type 41 is the main armament found on a battleship and battlecruisers, coming in two distinct turret designs. [[IJN Hyuga]] has | + | The 36 cm/45 Type 41 is the main armament found on a battleship and battlecruisers, coming in two distinct turret designs. [[IJN Hyuga]] has armour tailored for broadsides, with higher protection on the turret face and the sides of the ammo elevator. [[Kongo (Family)|Kongo-class]] features protection that's more all-rounded, lacking any particular weak spots like the base of the ammo elevator on Hyuga. |
{{clear|right}} | {{clear|right}} | ||
=== Available ammunition === | === Available ammunition === | ||
<!-- ''Describe the shells that are available for the weapon and their features and purpose. If it concerns autocannons or machine guns, write about different ammo belts and what is inside (which types of shells).'' --> | <!-- ''Describe the shells that are available for the weapon and their features and purpose. If it concerns autocannons or machine guns, write about different ammo belts and what is inside (which types of shells).'' --> | ||
− | [[File:36 cm 45 Type 41 (356 mm) SAP vs HE.jpg|thumb|right|Protection analysis of the SAP (left) and HE (right) shell damage vs | + | [[File:36 cm 45 Type 41 (356 mm) SAP vs HE.jpg|thumb|right|Protection analysis of the SAP (left) and HE (right) shell damage vs unarmoured (top) and armoured (bottom) parts of a ship showing SAP being far superior if it can fuze on at least 12 mm of armour and HE holding advantage if there's no armour to fuze from]] |
There are 4 types of shells available, SAP shared by all ships, distinct APC shells for [[IJN Hyuga]], a distinct APC shells for [[Kongo (Family)|Kongo-class]] and the HE shells available only for the Kongo-class. | There are 4 types of shells available, SAP shared by all ships, distinct APC shells for [[IJN Hyuga]], a distinct APC shells for [[Kongo (Family)|Kongo-class]] and the HE shells available only for the Kongo-class. | ||
− | * 356 mm ordinary SAP - the default shell, is most useful of the three, having the largest bursting charge while also maintaining good penetration capabilities and one of the best muzzle velocities in its class. It's able to deal with most of the targets delivering an abundance of damage. Where it struggles are Battleships or otherwise heavily- | + | * 356 mm ordinary SAP - the default shell, is most useful of the three, having the largest bursting charge while also maintaining good penetration capabilities and one of the best muzzle velocities in its class. It's able to deal with most of the targets delivering an abundance of damage. Where it struggles are Battleships or otherwise heavily-armoured parts of the warships (turret faces, armoured magazines, etc.) |
− | * APC shells (Type 91 / 3rd Year Type) - a perfect choice for dealing with Battleships or more heavily | + | * APC shells (Type 91 / 3rd Year Type) - a perfect choice for dealing with Battleships or more heavily-armoured and/or angled battlecruisers. What they lack in explosive filler, they make up in penetration. Generally shouldn't be used against lightly-armoured targets, as the damage output is rather inadequate. Older 3rd Year Type APC shells have about 30mm less penetration, but in most engagements it makes no difference. |
− | * Common Type 0 HE - an oddity among warships, where the HE shell has significantly less explosive filler than the SAP shell. Given that SAP has a fuze of just 12 mm it leaves HE only for the least | + | * Common Type 0 HE - an oddity among warships, where the HE shell has significantly less explosive filler than the SAP shell. Given that SAP has a fuze of just 12 mm it leaves HE only for the least armoured targets, such as destroyers (which likely would be better dealt with using the secondary guns) or taking out exposed emplacements like unarmoured secondary and anti-aircraft guns. |
{| class="wikitable sortable" style="text-align:center" width="100%" | {| class="wikitable sortable" style="text-align:center" width="100%" | ||
Line 85: | Line 85: | ||
There's no direct 1-to-1 analogue to the Type 41, the nearest competitor is the American [[14 inch/45 Mk.8 (365 mm)|14 inch/45 Mk.8]] (historically Mk. 8 was 1930s upgrade to the 1910s-design, around the same age as the Type 41 designed in 1908). Against the US equivalent the Type 41 has a far better rate of fire, targeting speed, vertical guidance, somewhat lower muzzle velocity, smaller explosive filler, and about the same penetration, overall being able to deliver {{#vardefine:ArizonaFillerHE|39.3}}{{#vardefine:ArizonaRoF|1.2}}{{#vardefine:KongoFillerHE|32.45}}{{#vardefine:KongoFillerSAP|38.64}}{{#vardefine:KongoFillerRoF|2}}{{#expr: (({{#unit:jp_battlecruiser_kongo|weapon|{{{group|main}}}|{{{slot|1}}}|firerate}}*{{#var:KongoFillerHE}}) / ({{#var:ArizonaRoF}}*{{#var:ArizonaFillerHE}}) )*100-100 round 0 }}% higher explosive mass on target with the HE shells on per-gun basis, or even {{#expr: (({{#unit:jp_battlecruiser_kongo|weapon|{{{group|main}}}|{{{slot|1}}}|firerate}}*{{#var:KongoFillerSAP}}) / ({{#var:ArizonaRoF}}*{{#var:ArizonaFillerHE}}) )*100-100 round 0 }}% more when the SAP shells are used. | There's no direct 1-to-1 analogue to the Type 41, the nearest competitor is the American [[14 inch/45 Mk.8 (365 mm)|14 inch/45 Mk.8]] (historically Mk. 8 was 1930s upgrade to the 1910s-design, around the same age as the Type 41 designed in 1908). Against the US equivalent the Type 41 has a far better rate of fire, targeting speed, vertical guidance, somewhat lower muzzle velocity, smaller explosive filler, and about the same penetration, overall being able to deliver {{#vardefine:ArizonaFillerHE|39.3}}{{#vardefine:ArizonaRoF|1.2}}{{#vardefine:KongoFillerHE|32.45}}{{#vardefine:KongoFillerSAP|38.64}}{{#vardefine:KongoFillerRoF|2}}{{#expr: (({{#unit:jp_battlecruiser_kongo|weapon|{{{group|main}}}|{{{slot|1}}}|firerate}}*{{#var:KongoFillerHE}}) / ({{#var:ArizonaRoF}}*{{#var:ArizonaFillerHE}}) )*100-100 round 0 }}% higher explosive mass on target with the HE shells on per-gun basis, or even {{#expr: (({{#unit:jp_battlecruiser_kongo|weapon|{{{group|main}}}|{{{slot|1}}}|firerate}}*{{#var:KongoFillerSAP}}) / ({{#var:ArizonaRoF}}*{{#var:ArizonaFillerHE}}) )*100-100 round 0 }}% more when the SAP shells are used. | ||
− | However, comparisons to the other high- | + | However, comparisons to the other high-calibre guns are not so rosy. While muzzle velocity and guidance speed are about average and perfectly adequate for a gun this size, the explosive filler is one of the worst for each of the shell types. The AP shell has average to above-average penetration, but the SAP round has some of the worst penetration values across the ranges. To give a specific example, the Type 41 falls significantly behind the Soviet [[305 mm/54 B-50 (305 mm)|305 mm/54 B-50]] in pretty much every respect for every shell type, despite the Soviet gun being of a much lower calibre. |
− | Despite of this, 36 cm/45 Type 41 is a very solid gun - it's lacking any particular highlights, but it also has no huge downsides. | + | Despite of this, the 36 cm/45 Type 41 is a very solid gun - it's lacking any particular highlights, but it also has no huge downsides. |
====HE==== | ====HE==== | ||
Line 225: | Line 225: | ||
== Usage in battles == | == Usage in battles == | ||
<!-- ''Describe the cannon/machine gun in the game - its distinctive features, tactics of usage against notable opponents. Please don't write a "guide" - do not impose a single point of view, but give the reader food for thought.'' --> | <!-- ''Describe the cannon/machine gun in the game - its distinctive features, tactics of usage against notable opponents. Please don't write a "guide" - do not impose a single point of view, but give the reader food for thought.'' --> | ||
− | Usage of the 36 cm/45 Type 41 is no different than most of the other high- | + | Usage of the 36 cm/45 Type 41 is no different than most of the other high-calibre main guns on the battlecruisers and battleships. The only feature of note are the lacklustre HE shells that should be avoided outside of some very specific circumstances. Overall though the gun is perfectly adequate, there's no point in which it stands out above all its peers, but there's also nothing where it's extraordinarily lacklustre. |
=== Pros and cons === | === Pros and cons === | ||
Line 234: | Line 234: | ||
* Good, high-velocity SAP shell | * Good, high-velocity SAP shell | ||
* Good penetration of the AP shell with a more flat penetration curve at range than the contemporaries | * Good penetration of the AP shell with a more flat penetration curve at range than the contemporaries | ||
− | * Large shells make for a huge holes in the enemy ships, speeding up flooding and making unwatering longer making it common to sink ships via flooding, especially destroyers and light cruisers | + | * Large shells make for a huge holes in the enemy ships, speeding up flooding and making unwatering longer making it common to sink ships via flooding, especially destroyers and light cruisers |
'''Cons:''' | '''Cons:''' | ||
− | * Extremely | + | * Extremely lacklustre HE shell, having some of the smallest explosive fillers and muzzle velocity, thus being extremely situational |
− | * Dedicated | + | * Dedicated armour-piercing shell has one of the smallest explosive fillers, trading off above-average penetration for a very poor after-penetration damage |
== History == | == History == |
Revision as of 20:04, 12 September 2022
Contents
Description
The 36 cm/45 Type 41 is a Japanese 356 mm naval cannon. It is a very capable naval weapon in War Thunder, often able to take down enemy destroyers or light cruisers with a single salvo (even if only by flooding). Even the default SAP shells will penetrate everything but the heaviest armour on battleships and battlecruisers.
Like all high-calibre guns, the Type 41 is best used against large, predictable targets, as the base 39-second reload time (decreased down to 30 seconds with crew skills and qualifications) makes it tricky to correct for maneuvering targets, such as destroyers or coastal vessels. These are better left for the secondary, or even anti-air guns.
Vehicles equipped with this weapon
General info
Ship | Front | Sides | Top | Elevator | ||||
---|---|---|---|---|---|---|---|---|
Tickness (mm) | type | (mm) | type | (mm) | type | (mm) | type | |
IJN Hyuga | 305 | RCA | 203 | RCA | 115 | RHA | 299—100 | RCA |
IJN Kongo | 254 | RCA | 254 | RCA | 152 | RCA | 229 | RCA |
The 36 cm/45 Type 41 is the main armament found on a battleship and battlecruisers, coming in two distinct turret designs. IJN Hyuga has armour tailored for broadsides, with higher protection on the turret face and the sides of the ammo elevator. Kongo-class features protection that's more all-rounded, lacking any particular weak spots like the base of the ammo elevator on Hyuga.
Available ammunition
There are 4 types of shells available, SAP shared by all ships, distinct APC shells for IJN Hyuga, a distinct APC shells for Kongo-class and the HE shells available only for the Kongo-class.
- 356 mm ordinary SAP - the default shell, is most useful of the three, having the largest bursting charge while also maintaining good penetration capabilities and one of the best muzzle velocities in its class. It's able to deal with most of the targets delivering an abundance of damage. Where it struggles are Battleships or otherwise heavily-armoured parts of the warships (turret faces, armoured magazines, etc.)
- APC shells (Type 91 / 3rd Year Type) - a perfect choice for dealing with Battleships or more heavily-armoured and/or angled battlecruisers. What they lack in explosive filler, they make up in penetration. Generally shouldn't be used against lightly-armoured targets, as the damage output is rather inadequate. Older 3rd Year Type APC shells have about 30mm less penetration, but in most engagements it makes no difference.
- Common Type 0 HE - an oddity among warships, where the HE shell has significantly less explosive filler than the SAP shell. Given that SAP has a fuze of just 12 mm it leaves HE only for the least armoured targets, such as destroyers (which likely would be better dealt with using the secondary guns) or taking out exposed emplacements like unarmoured secondary and anti-aircraft guns.
Penetration statistics | |||||||
---|---|---|---|---|---|---|---|
Ammunition | Type of warhead |
Penetration @ 0° Angle of Attack (mm) | |||||
1,000 m | 2,500 m | 5,000 m | 7,500 m | 10,000 m | 15,000 m | ||
Ordinary SAP | SAPCBC | 301 | 280 | 248 | 222 | 199 | 168 |
3rd Year Type APC | APCBC | 607 | 564 | 500 | 447 | 402 | 338 |
Type 91 APC | APCBC | 635 | 593 | 529 | 476 | 431 | 366 |
Common Type 0 | HE | 67 | 67 | 67 | 67 | 67 | 67 |
Shell details | |||||||||
---|---|---|---|---|---|---|---|---|---|
Ammunition | Type of warhead |
Velocity (m/s) |
Projectile Mass (kg) |
Fuse delay (s) |
Fuse sensitivity (mm) |
Explosive Mass (TNT equivalent) (g) |
Ricochet | ||
0% | 50% | 100% | |||||||
Ordinary SAP | SAPCBC | 780 | 635.58 | 0.01 | 12 | 68,640 | 48° | 63° | 71° |
3rd Year Type APC | APCBC | 780 | 635.58 | 0.05 | 12 | 13,310 | 48° | 63° | 71° |
Type 91 APC | APCBC | 771 | 671.3 | 0.05 | 12 | 12,210 | 48° | 63° | 71° |
Common Type 0 | HE | 805 | 621 | 0 | 0.1 | 32,450 | 79° | 80° | 81° |
Comparison with analogues
There's no direct 1-to-1 analogue to the Type 41, the nearest competitor is the American 14 inch/45 Mk.8 (historically Mk. 8 was 1930s upgrade to the 1910s-design, around the same age as the Type 41 designed in 1908). Against the US equivalent the Type 41 has a far better rate of fire, targeting speed, vertical guidance, somewhat lower muzzle velocity, smaller explosive filler, and about the same penetration, overall being able to deliver 38% higher explosive mass on target with the HE shells on per-gun basis, or even 64% more when the SAP shells are used.
However, comparisons to the other high-calibre guns are not so rosy. While muzzle velocity and guidance speed are about average and perfectly adequate for a gun this size, the explosive filler is one of the worst for each of the shell types. The AP shell has average to above-average penetration, but the SAP round has some of the worst penetration values across the ranges. To give a specific example, the Type 41 falls significantly behind the Soviet 305 mm/54 B-50 in pretty much every respect for every shell type, despite the Soviet gun being of a much lower calibre.
Despite of this, the 36 cm/45 Type 41 is a very solid gun - it's lacking any particular highlights, but it also has no huge downsides.
HE
Cannon | Sample Ship | Ammo | Calibre (mm) |
Muzzle Velocity (m/s) |
Sustained rate of fire (rounds/min) |
Targeting speed (°/s) |
TNT Equivalent (kg) |
Penetration @ 0° Angle of Attack (mm) | ||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Horizontal | Vertical | 1,000 m | 5,000 m | 10,000 m | ||||||||
356 mm Common Type 0 | IJN Kongo | HE | 356 | 805 | 2 | 2.6 | 4.2 | 32.45 | 67 | 67 | 67 | |
12-inch/45 Vickers (305 mm) | IJN Ikoma | HE | 305 | 825 | 2 | 2.6 | 3.4 | 37.82 | 69 | 69 | 69 | |
14 inch/45 Mk.8 (365 mm) | USS Arizona | HE | 365 | 823 | 1.2 | 1.7 | 3.6 | 39.3 | 70 | 70 | 70 | |
13.5 inch/45 Mark 5(H) (343 mm) | HMS Marlborough | HE | 343 | 759 | 2 | 1.7 | 4.2 | 88.11 | 77 | 77 | 77 | |
305 mm/45 Mark X (305 mm) | HMS Invincible | HE | 305 | 831 | 2 | 2.6 | 3.4 | 53.13 | 72 | 72 | 72 | |
305 mm/50 SK L/50 (305 mm) | SMS Kaiser | HE with base fuze | 305 | 855 | 3 | 2.6 | 3.4 | 27 | 167 | 124 | 87 | |
12-inch/52 pattern 1907 (305 mm) | Parizhskaya kommuna | HE patt.1928 | 305 | 950 | 2.2 | 2.7 | 5.1 | 55.41 | 72 | 72 | 72 | |
305 mm/54 B-50 (305 mm) | Kronshtadt | HE patt.1928 | 305 | 950 | 3 | 4.3 | 8.5 | 55.41 | 72 | 72 | 72 |
SAP
Cannon | Sample Ship | Ammo | Calibre (mm) |
Muzzle Velocity (m/s) |
Sustained rate of fire (rounds/min) |
Targeting speed (°/s) |
TNT Equivalent (kg) |
Penetration @ 0° Angle of Attack (mm) | ||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Horizontal | Vertical | 1,000 m | 5,000 m | 10,000 m | ||||||||
356 mm Common Type 0 | IJN Kongo | SAPCBC | 356 | 780 | 2 | 2.6 | 4.2 | 38.64 | 301 | 248 | 199 | |
13.5 inch/45 Mark 5(H) (343 mm) | HMS Marlborough | SAPCBC | 343 | 759 | 2 | 1.7 | 4.2 | 53.3 | 305 | 267 | 223 | |
15 inch/42 BL Mark I (381 mm) | HMS Hood | SAPCBC | 381 | 752 | 2 | 1.7 | 4.2 | 58.6 | 487 | 418 | 352 | |
305 mm/50 SK L/50 (305 mm) | SMS Kaiser | SAP | 305 | 850 | 3 | 2.6 | 3.4 | 10.8 | 481 | 357 | 252 | |
12-inch/52 pattern 1907 (305 mm) | Parizhskaya kommuna | SAPCBC | 305 | 762 | 2.2 | 2.7 | 5.1 | 55.2 | 395 | 301 | 223 |
APC
Cannon | Sample Ship | Ammo | Calibre (mm) |
Muzzle Velocity (m/s) |
Sustained rate of fire (rounds/min) |
Targeting speed (°/s) |
TNT Equivalent (kg) |
Penetration @ 0° Angle of Attack (mm) | ||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Horizontal | Vertical | 1,000 m | 5,000 m | 10,000 m | ||||||||
356 mm Common Type 0 | IJN Kongo | APCBC | 356 | 805 | 2 | 2.6 | 4.2 | 12.21 | 635 | 529 | 431 | |
12-inch/45 Vickers (305 mm) | IJN Ikoma | APC | 305 | 825 | 2 | 2.6 | 3.4 | 13.64 | 496 | 345 | 229 | |
14 inch/45 Mk.8 (365 mm) | USS Arizona | APCBC | 365 | 823 | 1.2 | 1.7 | 3.6 | 14 | 645 | 542 | 444 | |
13.5 inch/45 Mark 5(H) (343 mm) | HMS Marlborough | APCBC Mk.IIIa | 343 | 759 | 2 | 1.7 | 4.2 | 14.1 | 601 | 519 | 441 | |
15 inch/42 BL Mark I (381 mm) | HMS Hood | APCBC | 381 | 752 | 2 | 1.7 | 4.2 | 20.68 | 644 | 528 | 422 | |
305 mm/50 SK L/50 (305 mm) | SMS Kaiser | APC | 305 | 855 | 3 | 2.6 | 3.4 | 13.6 | 519 | 383 | 270 | |
12-inch/52 pattern 1907 (305 mm) | Parizhskaya kommuna | APCBC | 305 | 762 | 2.2 | 2.7 | 5.1 | 12.96 | 522 | 398 | 295 | |
305 mm/54 B-50 (305 mm) | Kronshtadt | APCBC | 305 | 900 | 3 | 4.3 | 8.5 | 18.79 | 677 | 541 | 415 |
Usage in battles
Usage of the 36 cm/45 Type 41 is no different than most of the other high-calibre main guns on the battlecruisers and battleships. The only feature of note are the lacklustre HE shells that should be avoided outside of some very specific circumstances. Overall though the gun is perfectly adequate, there's no point in which it stands out above all its peers, but there's also nothing where it's extraordinarily lacklustre.
Pros and cons
Pros:
- Good, high-velocity SAP shell
- Good penetration of the AP shell with a more flat penetration curve at range than the contemporaries
- Large shells make for a huge holes in the enemy ships, speeding up flooding and making unwatering longer making it common to sink ships via flooding, especially destroyers and light cruisers
Cons:
- Extremely lacklustre HE shell, having some of the smallest explosive fillers and muzzle velocity, thus being extremely situational
- Dedicated armour-piercing shell has one of the smallest explosive fillers, trading off above-average penetration for a very poor after-penetration damage
History
Examine the history of the creation and combat usage of the weapon in more detail than in the introduction. If the historical reference turns out to be too long, take it to a separate article, taking a link to the article about the weapon and adding a block "/History" (example: https://wiki.warthunder.com/(Weapon-name)/History) and add a link to it here using the main
template. Be sure to reference text and sources by using <ref></ref>
, as well as adding them at the end of the article with <references />
.
Media
Excellent additions to the article would be video guides, screenshots from the game, and photos.
See also
Links to the articles on the War Thunder Wiki that you think will be useful for the reader, for example:
- reference to the article about the variant of the cannon/machine gun;
- references to approximate analogues by other nations and research trees.
External links
Paste links to sources and external resources, such as:
- topic on the official game forum;
- other literature.
Japan naval cannons | |
---|---|
20 mm | JM61 · Type 98 |
25 mm | 25 mm/60 Type 96 |
37 mm | Type 4 · Type 11 pattern 1922 |
40 mm | 40 mm/62 Vickers |
57 mm | Type 97 |
75 mm | Type 88 AA |
76 mm | 3-inch/40 Type 41 · 8 cm/40 3rd Year Type · 8 cm/60 Type 98 |
100 mm | 100/65 mm Type 98 mod A |
120 mm | 120 mm/45 3rd Year Type · 120 mm/45 10th year type |
127 mm | 5 inch/40 Type 89 · 127 mm/50 3rd Year Type |
140 mm | 140 mm/50 3rd Year Type |
152 mm | 6-inch/45 Type 41 · 15 cm/50 Type 41 |
155 mm | 155 mm/60 3rd Year Type |
200 mm | 20 cm 3rd year type No.1 |
203 mm | 20 cm/45 Type 41 · 20 cm/50 3rd year type No.2 |
356 mm | 36 cm/45 Type 41 |
410 mm | 410 mm/45 Type 3 |
Foreign: | |
20 mm | 20 mm/70 Oerlikon Mk.II (USA/Britain) |
40 mm | Bofors L/60 Mark 1 (USA) · Bofors L/60 Mark 2 (USA) · Bofors L/60 Mark 3 (USA) |
47 mm | 3 pdr QF Hotchkiss (Britain) |
76 mm | 3-inch Mark 10 (USA) · 3 inch Mk.33 (USA) · 3-inch Mk.34 (USA) |
120 mm | 4,7-inch/40 Armstrong (Britain) |
127 mm | 5 inch/38 Mk.12 (USA) |
305 mm | 12-inch/45 Vickers (Britain) · 12-inch/50 Vickers (Britain) |