Cobra King

This page is about the premium American heavy tank Cobra King. For other M4 Shermans, see M4 Sherman (Family). For other uses, see M4 (Disambiguation).

Cobra King

Cobra King

USA

III Rank

Battle rating:

AB	RB	SB
5.3	5.7	5.7

Class:

PREMIUM

Heavy tank

Purchase:2 980

Show in game

Description

The Assault Tank M4A3E2 Jumbo "Cobra King" is a premium rank III American heavy tank with a battle rating of 5.3 (AB) and 5.7 (RB/SB). It was one of the first American tanks to be released with the American ground tree in Update 1.45 "Steel Generals". A premium version of the M4A3E2 Jumbo. As a side note, the nickname "Jumbo" was likely never used during WWII, as there is no record of it. However, its use both on the Wiki and in-game is still prevalent.

The "Cobra King" is in many respects the same as the regular M4A3E2 with some notable cosmetic differences. The most notable is a different shade of green on the vehicle than the standard US olive-drab green, with a more pronounced green colour than the subdued mix with brown. On vehicles that did not meddle with the decals, the large white text of "First in Bastogne" is present on the tank hull's left side, boasting about the tank's actual achievement in the US Third Army in World War II. A bit lower on the hull sides will show a decal giving the tank its name "Cobra King". Another large difference is the presence of kit, canvas, gear, tracks, and fuel tanks on the rear of the Cobra King vehicle, those of which are absent on the regular vehicle.

The "Cobra King" still features the double layered front armour giving the vehicle its distinctive 101.6 mm total front armour. The transmission housing is also considerably beefier too from the addition of armour at the area as well. The front of the T23-style turret is also distinctive with the very blocky gun mantlet and circular barrel shroud around the rather underwhelming 75 mm gun barrel.

The sides and suspension look like the usual game with the M4 Sherman series, but with minor differences. The flat side armour of the hull, instead of 38.1 mm thick is now 76.2 mm thick for much stronger side protection. However, the lower side hull around the bogie suspension area is still only 38.1 mm thick, vulnerable to most regular anti-tank weapons. Another minor difference is the tracks, the T48 rubber chevron tracks are equipped with extended end connectors in an effort to improve ground pressure performance for the additional weight of the armour.

This tank is used as a breakthrough tank to attack fortified enemy positions due to its thick armour. It is a great tank when fighting Tigers as the 88mm cannons cannot penetrate the armour of the Jumbo Sherman from its sides when angled efficiently. As such it allows players to get close to Tigers and attack them from the sides, or force them to retreat. When fighting Panthers the Jumbo Sherman is less effective as the 75mm cannon on the Panther can penetrate the armour of the Jumbo Sherman from the front even when angled more than 30 degrees at 500 meters.

The Jumbo's armour is nothing to underestimate. It can bounce 88mm shells from the Tiger 1 at point blank range when angled more than 30 degrees. And the turret is well armoured from all sides, too.

On the downside, the gun is wimpy without M61 shot and even then it still bounces more often than not. Best to take a bit more ammo than normal to compensate for all the shots that will bounce.

General info

Survivability and armour

Armourfront / side / back

Hull101 / 76 / 38

Turret177 / 152 / 152

Crew5 people

Visibility122 %

Armour type:

• Rolled homogeneous armour (Front, Side, Rear, Roof)
• Cast homogeneous armour (Turret, Transmission area)

Armour	Front (Slope angle)	Sides	Rear	Roof
Hull	63.5 + 38.1 mm (47°) Front glacis 114.3-139.7 mm (7-66°) Transmission housing	76.2 mm Top 38.1 mm Bottom	38.1 mm (10°) Top 38.1 mm (7-24°) Bottom	19.5 mm
Turret	152.4 mm (0-52°) Turret front 177.8 mm (4-60°) Gun mantlet	152.4 mm (4-42°)	152.4 mm (0-79°)	63.5 mm Front 25.4 mm
Armour	Sides	Roof
Cupola	51 mm	25.4 mm

Notes:

• Suspension wheels are 15 mm thick, the bogies are 10 mm thick, and tracks are 17 mm thick.
• Belly armour is 25.4 mm thick.
• Hull underside right above the tracks are 9.5 mm thick.
• Gun breech is 300 mm thick in structural steel.

The M4A3E2 Jumbo presents very little frontal weak spots in an engagement. It is best to try and force the Jumbo to try and angle his vehicle towards the player or his allies. An angle more than 30 degrees can expose the much weaker lower side hull armour in the suspension that is only 38.1 mm thick. With a powerful enough gun, a round can penetrate this area and damage the crew, or even set off the ammunition all cluttered up on the bottom of the tank.

If a frontal engagement is unavoidable and is unfortunately armed with guns unable to penetrate through the front glacis, there are only two areas that are viable. First is the machine gun port, which is one of the areas that is not layered with the extra 38.1 mm added on top of the base armour. Guns like the Panzer IV 75 mm KwK 40 guns that are unable to cleave through the front glacis can push their luck in this area, with small "sweet spots" that the round can pass through. Another way to attack the M4A3E2 in this scenario is exploiting a shot-trap in the gun mantlet. The small corner flaps on the bottom corners of the gun mantlet have a tendency to deflect rounds downwards onto the 19.5 mm hull roof armour. While this will be left to the ricochet chances, it is still possible and can be used if no other scenarios are favourable.

Mobility

Speedforward / back

AB38 / 5 km/h

RB and SB36 / 5 km/h

Number of gears5 forward

1 back

Weight37.8 t

Engine power

AB954 hp

RB and SB500 hp

Power-to-weight ratio

AB25.2 hp/t

RB and SB13.2 hp/t

Game Mode	Max Speed (km/h)		Weight (tons)	Engine power (horsepower)		Power-to-weight ratio (hp/ton)
	Forward	Reverse		Stock	Upgraded	Stock	Upgraded
Arcade	38	5	37.8	646	954	17.09	25.24
Realistic	36	5		442	500	11.69	13.23

Modifications and economy

Repair cost

AB1 595

RB1 768

SB2 443

Crew training10 000

Experts250 000

Aces630

Research Aces870 000

Reward for battleAB / RB / SB

2 × 100 / 150 / 170 %

2 × 160 / 160 / 160 %

Modifications

Mobility	Protection	Firepower
Tracks Suspension Brake System Filters Transmission Engine	Improved Parts Improved FPE Crew Replenishment	Horizontal Drive Adjustment of Fire 75mm_usa_APCBC_ammo_pack Elevation Mechanism 75mm_usa_APCR_ammo_pack 75mm_us_M89_Smoke_ammo_pack

Armaments

Main armament

75 mm M3 cannon

Vertical stabilizer

Reduces the swing of the gun in one plane while moving

Ammunition104 rounds

Reloadbasic crew → aces

6.5 → 5.0 s

Vertical guidance-10° / 25°

75 mm M3					Turret rotation speed (°/s)					Reloading rate (seconds)
Mode	Capacity	Vertical	Horizontal	Stabilizer	Stock	Upgraded	Full	Expert	Aced	Stock	Full	Expert	Aced
Arcade	104	-10°/+25°	±180°	Vertical	19.42	26.88	32.64	36.10	38.40	6.50	5.75	5.30	5.00
Realistic					14.28	16.80	20.40	22.56	24.00

Ammunition

Penetration statistics
Ammunition	Type of warhead	Penetration @ 0° Angle of Attack (mm)
		10 m	100 m	500 m	1,000 m	1,500 m	2,000 m
M72 shot	AP	91	88	78	67	57	49
M48 shell	HE	10	10	10	10	10	10
M61 shot	APCBC	104	101	90	78	68	59
T45 shot	APCR	139	135	121	105	91	79

Shell details
Ammunition	Type of warhead	Velocity (m/s)	Projectile Mass (kg)	Fuse delay (m)	Fuse sensitivity (mm)	Explosive Mass (TNT equivalent) (g)	Ricochet
							0%	50%	100%
M72 shot	AP	619	6.3	N/A	N/A	N/A	47°	60°	65°
M48 shell	HE	463	6.3	0	0.1	666	79°	80°	81°
M61 shot	APCBC	618	6.79	1.2	14	63.7	48°	63°	71°
T45 shot	APCR	868	3.81	N/A	N/A	N/A	66°	70°	72°

Smoke shell characteristics
Ammunition	Velocity (m/s)	Projectile Mass (kg)	Screen radius (m)	Screen deploy time (s)	Screen hold time (s)	Explosive Mass (TNT equivalent) (g)
M89	259	3	13	5	20	50

Ammo racks

Ammo racks of the M4A3E2 (identical).

Full ammo	1st rack empty	2nd rack empty	3rd rack empty	Visual discrepancy
104	100 (+4)	50 (+54)	0 (+104)	No

Notes:

• As they are modeled by sets of 2, shells disappear from the rack only after you fire both shells in the set.
• Turret empty: 100 (+4) shells.

Machine guns

12.7 mm M2HB machine gun

Ammunition600 rounds

Belt capacity200 rounds

Reloadbasic crew → aces

10.4 → 8.0 s

Fire rate575 shots/min

Vertical guidance-10° / 30°

Horizontal guidance-60° / 60°

7.62 mm M1919A4 machine gun (coaxial)

Ammunition3 000 rounds

Belt capacity250 rounds

Reloadbasic crew → aces

10.4 → 8.0 s

Fire rate500 shots/min

12.7 mm M2HB
Mount	Capacity (Belt)	Fire rate	Vertical	Horizontal
Pintle	600 (200)	577	-10°/+30°	±60°

7.62 mm M1919A4
Mount	Capacity (Belt)	Fire rate	Vertical	Horizontal
Coaxial	3,000 (250)	500	N/A	N/A

Usage in battles

The M4A3E2 Jumbo is best in assaulting enemy positions with allies. Its great mobility for a heavy tank, especially with its armour, makes it a vehicle able to charge into battle and take anything head-on with confidence. It can act as a bullet magnet against enemy tanks more worried about the M4A3E2, diverting fire that would've gone to more vulnerable teammates. Though the 75 mm gun's AP performance is not suited to the type of enemies expected at the BR, it can still harass enemies and the gun is lethal enough that enemies will be forced to show their front armour towards the Jumbo else a 75 mm penetrates their side armour. Their focus on the Jumbo can allow allies to move around and eliminate them. During all this, take care not to over-angle and show the lower side armour too much as this will allow vehicles to penetrate through down there and damage modules, even the ammunition storage if they are lucky.

Another role the M4A3E2 is good it is as a flanker. Due to its great mobility as a heavy tank, the M4A3E2 Jumbo can manoeuvre like a medium tank around the battlefield. This is also beneficial to the 75 mm gun as it would permit the M4A3E2 a chance to attack the weaker side armours of enemy vehicles. Once flanking around and finding a prime position in a firing angle right into an enemy chokepoint, minimize exposure to anything but the front armour and the M4A3E2 can remain a formidable obstacle to all opponents. Take care not to be outflanked by enemy players aware of the M4A3E2 position.

Due to the M4A3E2 Jumbo having a slightly higher battle-rating than the other M4 Shermans at 5.0 it can be up-tiered against tanks such as the Panther D and Tiger H1, meaning it's 75 mm cannon starts becoming less effective. For this reason, it is advisable to take the T45 APCR ammo into battle, at least enough to take on the armoured targets the Jumbo will face.

The Soviet 85 mm can be a threat, so caution is advised when going up against tanks armed with the 85 mm, such as the T-34-85, SU-85, and IS-1. The Jagdpanzer 38(t) and Jagdpanzer IV can be tricky when facing off against them. Their frontal armour is too thick and sloped for the 75 mm M3 gun to have any effect on it. For these two targets, it is advised to target their tracks and transmission and then flank for a side shot, where the armour is much weaker. Finally, the Dicker Max wields a 105 mm that can penetrate the front plate of the M4A3E2 Jumbo, so caution is advised against those as well.

Pros and cons

Pros:

• Decent 75 mm gun with APCR rounds
• High rate of fire for the main gun
• Excellent gun depression
• Very strong turret armour from all sides, very good at hull down position
• Excellent frontal armour, about 101 mm thick
• Can absorb a lot of damage
• Better mobility than the Russian KV-1 and the British Churchill
• Equipped with gun stabilizer, making it more accurate at moving and when preparing a shot after moving
• Good acceleration
• Incredibly tough when angled
• Wide tracks enable it to have decent off-road mobility, unlike other previous Sherman models
• Learning curve from previous M4 Sherman variant will help a lot at mastering this tank

Cons:

• 75 mm gun lacks penetration against heavy tanks
• APCR shot is quite expensive, using it as a primary shell will seriously lower the Silver Lion reward by a large margin
• Armour weak spot above the gun-mantlet (63.5 mm @ 60°)
• Small bottom corners on M4A3E2 gun mantlet can serve as shot traps
• Side armour better than normal, but still weak (76.2 mm) and the lower side hull armour is even worse (38.1 mm)
• Very thin rear armour
• Inability to compound angle greatly due to very weak lower side hull armour that would be penetrated
• Tall profile makes it a bigger target
• Bad off-road manoeuvrability
• Low top speed of 35 km/h
• Reverse speed is bad
• Hull MG is a weak spot on the front glacis

History

Development

Even before the invasion of Normandy, the Allied commanders had to figure out a method in order to breach heavily-defended fortification lines such as the Siegfried Line blocking the path from France to Germany. One of the solutions was the implementation of "assault tanks" that would enter enemy territory and root out the enemy fortifications. The initial plan was for the production of the M26 Pershing tanks to fulfil this role, but setbacks in its development caused the M26 deployment to be delayed until 1945. A quick solution had to be made to fill this "assault tank" role for the invasion of Europe in 1944.

The US Ordnance Department then took their abundant M4 Shermans in stock and fixed them up for the new role they've been assigned. Although keeping the same engine, the armour was upped from around 76.2 mm initial thickness to 102 mm and angled at 47 degrees from vertical. This angle would influence later Sherman designs such as the M4A3 by changing the original 56 degrees angled glacis with protruding crew hatches to 47 degrees angled glacis without any protrusion from the crew hatches. This modified M4 Sherman's armour when angled would then be 150 mm line-of-sight (LOS) thick and 180 mm effective. The side armour was also increased to 76.2 mm thick and the turret was redesigned to provide more protection. These modified Shermans were designated as the M4A3E2 by the Ordnance Department, whereas the nickname "Jumbo" was likely a post-war invention. At the end of the modifications, the Sherman "Jumbo" now weighed about 42 tons and moved at a lower speed of 22 miles per hour. A drawback to the increased weight of the Sherman is that the Vertical Volute Suspension System (VVSS) from the Sherman was unable to take the weight easily, so extra care was taken by the crew members to not break the suspension.

In March of 1944, the US Army ordered 254 of these vehicles to be delivered for use in European Operations. Intended to assault the Normandy Beachhead, it was deployed in Normandy after D-Day to assist the infantry push through German defences. The M4A3E2 originally came with the 75 mm cannon to support infantry with its better HE shells compared to the planned 76 mm instalment, but the 76 mm was installed later in the campaign and called the M4A3E2 (76) W Jumbo.

Combat usage

The M4A3E2s was well-liked by the crew and commanders due to its protection value. Despite the weight difference and strain on the suspension, it performed reliably and could absorb damage that would otherwise destroy regular Shermans. Later in the war, when the quantity of the M4 Sherman "Jumbos" were unable to meet the demand, George S. Patton ordered the existing M4 Shermans to weld on armour plates scavenged from knocked out tanks to makeshift "on-the-field" Jumbos. This caused the newer Shermans such as the M4A3 (76) W HVSS to have the same protection by welding metal onto the hull. One of the Jumbo's notable participation in the war was in Patton's Third Army where it spearheaded the assault of Bastogne to relieve the pinned down 101st Paratroopers. The M4A3E2 "Cobra King" was the tank Lt Charles P. Boggess commanded to lead elements of Patton's Third Army into Bastogne on December 25, 1944. The 101st was finally relieved and reconnected with the Third Army on December 27. "Cobra King", however, was knocked out sometime during the fighting (maybe during the Hammelburg Raid) and had its interior destroyed by an internal fire. When the tank's remnants were identified in 2008, it was shipped back to the United States to Fort Knox at the Patton museum to be restored by Len Dyer, director of the Patton Museum and the soon-to-be National Armor and Cavalry Museum. After two years of restoration work, the tank was put into the display at Fort Benning as a dedication to the Charlie Company of the 4th Armored Division's 37th Tank Battalion. It was moved in August 2017 to the future National Museum of the United States Army at Fort Belvoir, Virginia.

When the war in the European Theater ended, the M4A3E2s were then placed stateside for the preparation for the invasion of the Japanese Home Islands. However, this was never to be fulfilled as Japan surrendered to the United States in September 1945. The M4A3E2 Shermans proved to be a very effective stop-gap solution until heavier armoured tanks such as the Pershing could come into play. In 1948, about 96 Sherman Jumbos still remained in US inventory.

In-game description

Preparations for the invasion of Europe saw a heavily armored assault tank designated M4A3E2 (76)W designed using the M4A3 base. In March 1944 the Armed Forces Committee approved a program refitting 254 tanks, some of which were equipped with 76 mm cannons. Their armor was strengthened by stacking 38 mm armor plates welded together on the front and sides of the hull. As a result, the frontal armor reached a thickness of 102 mm to go along with the 76 mm on the sides.

The transmission was protected with a 140 mm cast cover, while the rest of the hull was not modified. The new T23 cast turret had walls 152 mm thick and was special in that it did not have a hatch from which to fire a personal weapon. The 178 mm mantlet was mounted with a 76 mm M1A1C cannon, while ammunition was stored in wet stowage.

The thicker armor pushed the tank's weight to 38 tons, simultaneously lowering its top speed to 35 km/h.

The exact number of M4A2E2 tanks refitted with 76 mm M1A1C cannons was never ascertained.

The tanks were very popular as column leads, given the fact that German antitank guns could not penetrate their frontal armor.

Media

Skins

• Skins and camouflages for the Cobra King from live.warthunder.com.

Images

• 

  Left hull side of the "Cobra King", where the crew made a note of their achievement.

• 

  Historical photo of the "Cobra King" at the Battle of the Bulge (National Archive).

Videos

How to destroy the Jumbo - War Thunder Official Channel

Cobra King Tank Review - NUSensei

See also

Other M4A3E2 vehicles in the game

• M4A3E2
• M4A3E2 (76) W
• M4A3E2 (France)

External links

News article about the tank

• Vilseck Tank confirmed as "Cobra King"
• "Cobra King" - Where is it today?
• "Cobra King" Combat History - Army News Archive
• Washington Post - A battered World War II hero of Bastogne gets a new home, and a museum built around it

References

USA heavy tanks
M4 Jumbo	M4A3E2 · Cobra King · M4A3E2 (76) W
M6	M6A1 · T1E1 · T1E1 (90) · M6A2E1
T26	T26E1-1 · T26E5
T29/30/34	T29 · T30 · T34
T32	T32 · T32E1
M103	M103
Others	T14