M4A3 (76) W (Japan)

▅M4A3 (76) W

▅M24

▅M41A1

▅M4A3 (76) W

▅M24

▅M41A1

Japan

IV Rank

Battle rating:

AB	RB	SB
5.3	5.7	5.7

Class:

Medium tank

Research:46 000

Purchase:155 000

Show in game

This page is about the medium tank M4A3 (76) W (Japan). For other uses, see M4 (Disambiguation).

Description

The Medium Tank M4A3 (76) W HVSS Sherman (or just ▅M4A3 (76) W) is a Rank IV Japanese medium tank with a battle rating of 5.3 (AB) and 5.7 (RB/SB). It was introduced along with the initial Japanese Ground Forces tree in Update 1.65 "Way of the Samurai". This Japanese vehicle, following the M24 SDF in the tree line, is identical to the American M4A3 (76) W HVSS Sherman.

General info

Survivability and armour

Armour type:

• Rolled homogeneous armour (Front, Side, Rear, Roof)
• Cast homogeneous armour (Turret, Gun mantlet, Transmission area)

Armour	Front (Slope angle)	Sides	Rear	Roof
Hull	63.5 mm (47°) Front glacis 63.5-107.9 mm (13-77°) Transmission housing	38.1 mm	38.1 mm (22°) Top 38.1 mm (13-44°) Bottom	19.5 mm
Turret	63.5 mm (10-62°) Turret front 88.9 mm (1-74°) Gun mantlet	63.5 mm (1-72°)	63.5 mm (0-80°)	25.4 mm
Armour	Sides	Roof
Cupola	63.5 mm (55-56°)	25.4 mm

Notes:

• Suspension wheels are 15 mm thick, bogies are 10 mm thick, and tracks are 20 mm thick.

Mobility

Mobility characteristic
Weight (tons)	Add-on Armor weight (tons)	Max speed (km/h)
33.4	0.6	46 (AB)
		41 (RB/SB)
Engine power (horsepower)
Mode	Stock	Upgraded
Arcade	775	954
Realistic/Simulator	442	500
Power-to-weight ratio (hp/ton)
Mode	Stock	Upgraded
Arcade	23.20	28.56
Realistic/Simulator	13.23	14.97

Armaments

Main armament

76 mm M1
Capacity			Vertical guidance	Horizontal guidance	Stabilizer
71			-10°/+25°	±180°	N/A
Turret rotation speed (°/s)
Mode	Stock	Upgraded	Prior + Full crew	Prior + Expert qualif.	Prior + Ace qualif.
Arcade	14.28	19.80	24.0	26.60	28.24
Realistic	14.28	16.80	20.4	22.60	24.00
Reloading rate (seconds)
Stock	Prior + Full crew	Prior + Expert qualif.	Prior + Ace qualif.
7.67	6.78	6.25	5.90

Ammunition

Penetration statistics
Ammunition	Type of warhead	Penetration in mm @ 90°
		10m	100m	500m	1000m	1500m	2000m
M62 Shell	APCBC	127	125	116	106	97	89
M42A1 Shell	HE	7	7	7	7	7	7
M79 Shot	AP	155	154	131	107	88	72
M93 Shot	APCR	221	215	203	181	154	124

Shell details
Ammunition	Velocity in m/s	Projectile Mass in kg	Fuse delay in m:	Fuse sensitivity in mm:	Explosive Mass in g (TNT equivalent):	Normalization At 30° from horizontal:	Ricochet:
							0%	50%	100%
M62 Shell	792	7.0	1.2	20	63.7	+4°	48°	63°	71°
M42A1 Shell	800	5.8	0.1	0.5	390	+0°	79°	80°	81°
M79 Shot	792	6.8	N/A	N/A	N/A	-1°	47°	60°	65°
M93 Shot	1036	4.3	N/A	N/A	N/A	+1.5°	66°	70°	72°

Smoke characteristic
Ammunition	Velocity in m/s	Projectile Mass in kg	Screen radius in m	Screen time in s	Screen hold time in s:	Explosive Mass in g (TNT equivalent):
M88	274	3.4	13	5	20	50

Ammo racks

Ammo racks of the M4A1 (76) W Sherman (Identical to M4A3 (76) W).

Full ammo	1st rack empty	2nd rack empty	3rd rack empty	4th rack empty	5th rack empty	Visual discrepancy
71	57 (+14)	43 (+28)	29 (+42)	15 (+56)	1 (+70)	Yes

Machine guns

12.7 mm M2HB
Pintle mount
Capacity (Belt capacity)				Fire rate (shots/minute)	Vertical guidance	Horizontal guidance
600 (200)				577	-10°/+70°	±60°

7.62 mm M1919A4
Coaxial mount
Capacity (Belt capacity)				Fire rate (shots/minute)	Vertical guidance	Horizontal guidance
3,000 (250)				500	N/A	N/A

Usage in the battles

Playing as the M4A3 can be tricky since it features armour that can't stop most calibers at its rank such as the German 8.8 cm or the Soviet 85 mm, including the fact that it isn't the fastest tank. The M4A3 plays more of a support role, use the powerful 76 mm to assist teammates during an advance or defense. The number one rule of this tank is to never fight alone with it, always be with a teammate and use cover when available since it will give the Sherman a great advantage.

Pros and cons

Pros:

• American GF veterans would easily adapt to using this tank
• Decent 76 mm gun
• Very fast turret traverse
• Quick reload for the 76mm Gun
• Access to APCR shells to help fight more heavily armoured tanks

Cons:

• Sherman armour starts to become deficient
• Tall profile, makes it a bigger target

History

Development

The M4 Sherman has become a proven and well-respected tank design by 1944. It was highly reliable, adequately armoured, and could be produced in a very large number with a dedicated support arm to ensure that all of the ones in the field could be kept operational. It was also by 1944 that the Sherman's faults were becoming a more defining trait than its advantages, namely with the increased prevalence of German anti-tank weaponry and tanks, such as the Panther tank. The German anti-tank abilities, ranging from rocket launchers, anti-tank guns, mines, and tank guns, all became more capable of penetrating the frontal armour or disabling the Sherman. This resulted in an increased Allied tank attrition rate of nearly double during the Normandy Campaign than that of the Allies' previous campaigns. Criticisms were raised on the Sherman's inability to destroy the heavier tanks with its 75 mm gun, the tendency of catching fire easily when a penetrating round hits an ammo stowage bin scattered in the Sherman interior, and the lack of mobility on the muddy terrain due to the track design. The first and second criticism was addressed with the high-velocity 76 mm gun and a "wet stowage" ammo containers, but mobility became a big issue especially once the Allied front in France reached the Siegfried Line on the border of Germany, where the ground became very muddy in the fall season. An attempt to fix this was improvising "extensions" on the tracks, but these were difficult to add and there were never enough to go around. The problem had to be addressed in the manufacturing plant and Ordnance Department set to work finding a better solution to fix the track flotation for better mobility.

The result was to be the basis of the next generation of Sherman models. Under the E8 program, new suspension was trialed on the Sherman, one was the horizontal-volute suspension system (HVSS) taken from the T20 program. The trials showed that the new suspension gave the Sherman a ground pressure that is even less than the heavier Panther, and this model was approved for production in March 1944, beginning in August 1944. Despite the time of production, the distance of the Atlantic Ocean between the American factories and Europe cause the delivery time of the first batch of the new models to be three months, meaning they would not see service until December 1944 the soonest. Nevertheless, the new Sherman, dubbed the M4A3 (76) W HVSS Sherman on papers and shortened as the M4A3E8, was considered the best overall Sherman design with its new upgrades.

Design

Aside from the enlarged T23 turret, the Sherman interior layout was largely unchanged from the original design. The driver and bow gunner still sat in the front, the three-man turret crew in the center, and the engine compartment in the back. The exterior was changed with the new horizontal-volute suspension system (HVSS), which presented a different bogie system with larger road wheels that allow the usage of a wider track for better mobility cross-country. The new suspension system helped defeat the problems the Sherman's original tracks had with sinking in the mud from poor flotation and poor traction on slippery terrain. Another advantage the HVSS gave was the ability to change out individual road wheels on the bogie rather than replace the entire bogie, easing maintenance and repairs. The suspension was also reported to be a very smooth ride in comparison with the vertical-volute suspension system (VVSS), leading tankers to nickname the tank the "Easy Eight" from the tank's experimental designation M4A3E8, with the E8 corresponding to the usage of the HVSS.

The M4A3(76)W HVSS ran on a gasoline Ford GAA V8 engine, which was the standard engine used in all M4A3 Sherman variants. The tank construction was welded and had a frontal armour plate sloping at a 47 degree angle. The (76) in the name indicated that the tank was armed with the more powerful 76 mm gun as a counter to the heavier German armour. The "W" designation on the Sherman indicated that the vehicle had the "wet stowage" feature in response to complaints that the Sherman can easily catch fire due to exploding ammunition. The "wet stowage" encased the ammo containers in a liquid mixture that would douse the flames when penetrated or block flaming shrapnels due to penetrating shots from hitting the ammunition. The containers also placed all the ammunition in the bottom center of the tank, reducing the likeliness of it being hit by a shell as the penetrating shell must go through every armour and obstacle to hit the tank center. This feature was only present after February 1944 and severely decreased the rate of Sherman fires. The "HVSS" indicated the usage of the horizontal-volute suspension system on the tank. The M4A3E8 started production in August 1944 and its production life ended around the end of World War II, probably September 1945. M4A3(76)W HVSS production consisted of 4,542 tanks out of the total 49,234 Shermans produced in its production life.

Japanese Service

In July 1st, 1954, Japan set up its post-war military force, the Japan Self-Defense Forces with the purpose of defending Japan should it come under conflict in the ongoing Cold War between America and the Soviet Union. To jump start the remilitarization, America gave the newly formed JSDF 254 M4A3E8 Shermans.

The Shermans remained in use in the JSDF until the new, domestic tank design Type 61 was made in large numbers during the 1960s.

Media

An excellent addition to the article will be video guides, as well as screenshots from the game and photos.

Read also

Links to the articles on the War Thunder Wiki that you think will be useful for the reader, for example,

• reference to the series of the vehicles;
• links to approximate analogues of other nations and research trees.

ETC.

Sources

Paste links to sources and external resources, such as:

• topic on the official game forum;
• other literature.