T-62M-1

This page is about the Soviet medium tank T-62M-1. For other versions, see T-62 (Family).

T-62M-1

T-62

T-72A

T-62M-1

T-62

T-72A

USSR

VI Rank

Battle rating:

AB	RB	SB
9.0	9.0	9.0

Class:

Medium tank

Research:94 000

Purchase:520 000

Show in game

Description

The T-62M-1 is an armoured modification of the T-62, which is the first variant of the T-62 main battle tank family. It is outfitted with a BDD appliqué armour package, an additional belly armour plate for anti-mine protection, 10 mm thick reinforced rubber side skirts, and a 10 mm thick anti-neutron liner as part of an extensive modernization package aimed at improving protection, mobility, and firepower. The BDD appliqué armour package increases frontal armour protection to nearly that of the first variant of the T-64 and T-72 main battle tank families. This appliqué armour package includes an appliqué plate on the glacis and two horseshoe-shaped blocks fitted to the front of the turret, which has been proven to be effective against all 84mm and 90mm tank rounds at all ranges, as well as a selection of 105mm armour-piercing discarding sabot (APDS) and high-explosive anti-tank (HEAT) ammunitions. The "Volna" fire control system was enhanced by mounting the KTD-2 laser rangefinder in an armoured box above the main armament. Finally, the tank has a new TShSM-41U gunner's sight, a new commander's sight, a "Meteor-M1" two-plane fully automatic stabilisation system, a BV-62 ballistic computer, and a 9K116-2 "Sheksna" anti-tank guided missile (ATGM) unit with 1K13-BOM sight, allowing it to fire 9M117 Bastion ATGMs through its tank gun. The T-62M-1 is a further enhancement from the base modification that includes a V-46-5M diesel engine.

Introduced in Update 1.79 "Project X", the T-62M-1 operates similarly to other Soviet main battle tanks. The T-62M-1 is well-suited for long-range sniping and support roles due to its incredible turret armour and highly effective and diverse ammunition options. Avoid close-range engagements at all costs, as the T-62M-1 is inferior to other tanks at close ranges in almost every way. Adopt a hull-down position and take advantage of its powerful turret to support your teammates from far away.

General info

Survivability and armour

Composite armour

Balanced protection against all types of ammunition

Smoke grenades

Creation of a smoke screen in front of the vehicle

ESS

Creation of a smoke screen in the direction of movement of the vehicle

Armourfront / side / back

Hull100 / 80 / 45

Turret200 / 160 / 65

Crew4 people

Visibility75 %

The T-62M-1 has very similar armour to the T-55AM-1, having similar composite add-on armour. The turret cheeks are protected by large curved composite blocks, sometimes historically referred to as "Brezhnev's Eyebrows" due to their appearance. The turret's effective thickness through the composite overlay is 200 to 350 mm thick in this area, whether for kinetic or chemical rounds. The brow's composite armour does not entirely cover the turret, whose uncovered areas have an even lesser armour thickness: the sectors closer to the gun are not backed by metal-polymer layers and only the outer steel provides extra protection. It can help to point the turret slightly away from opponents to reduce the chances of getting hit in the non-composite zones.

The hull protection is less, although still relevant. The hull composite will stop APDS and HEAT rounds from the 105 mm L7 gun, but any more powerful rounds will penetrate. The hull sides are relatively well protected. 80 mm RHA will stop most autocannon rounds, and the composite skirts as well as flaps can stop HEAT rounds at an angle.

Frontal weak points include the cannon breech area, as it is not covered by the add-on composite. Additionally the lower front plate is not protected by composite. These areas are easy to penetrate. The hull sides also are only 20 mm near the bottom, which is a weakness that can be exploited by autocannons. That said, there is essentially nothing important in those areas. The rear armour is not worth mentioning, as it will not stop anything larger than a heavy machine gun.

Side flaps similar to those used on the T-64A (1971) can be equipped on the T-62M-1 with an unlockable modification. They add 30 kg of mass to the tank, which is a negligible penalty, and help to block HEATFS projectiles and ATGMs from side-aspect shots. Each flap will fall off after being hit, so do not count on being able to body-block an entire barrage of chemical rounds.

The T-62M-1 also has wet ammunition storage bins. 16 rounds are placed within the fuel tank located beside the driver, acting as a spaced armour, protecting the ammunition from HEAT. Successive HEAT shots might still detonate the ammunition. Note that APFSDS can detonate the rounds with ease, so avoid being shot in the hull if possible.

Armour type:

• Rolled homogeneous armour (hull)
• Cast homogeneous armour (turret, cupola)

Armour	Front (Slope angle)	Sides	Rear	Roof
Hull	100+30 mm (59°) Upper glacis 100 mm (55°) Lower glacis	80+8 mm Top 80 mm (spherical) + 8 mm Turret ring bulge 20 mm (28°) Bottom	45 mm (2°) Upper plate 20 mm (cylindrical) Lower glacis	30 mm (0-3°) 12 mm Mudguards
Turret	214-240 mm (spherical) + 65-85 (spherical) Turret cheeks 40-50 mm (0-63°) Gun mantlet	115-196 mm (spherical)	65 mm (spherical)	60 mm (74-78°) Front 30 mm (78-85°) Centre 60 mm (29-67°) Rear

Notes:

• Suspension wheels and tracks are 20 mm thick, while torsion bars are 10 mm thick.
• Belly armour is 20 mm thick.
• Commander cupola is 40 mm thick.
• Composite armour is present on the front glacis and turret front:

Composite armour	Front
Hull	Upper glacis ~300 mm Kinetic ~450 mm Chemical
Turret	Turret cheeks ~400 mm Kinetic 450-750 mm Chemical

Mobility

Speedforward / back

AB57 / 9 km/h

RB and SB51 / 8 km/h

Number of gears5 forward

1 back

Weight42.0 t

Engine power

AB1 316 hp

RB and SB690 hp

Power-to-weight ratio

AB31.3 hp/t

RB and SB16.4 hp/t

Game Mode	Max Speed (km/h)		Weight (tons)		Engine power (horsepower)		Power-to-weight ratio (hp/ton)
	Forward	Reverse	Stock	AoA	Stock	Upgraded	Stock	Upgraded
Arcade	57	9	41.9	0.03	1,069	1,316	25.47	31.33
Realistic	51	8			610	690	14.53	16.43

Modifications and economy

Repair costBasic → Reference

AB3 761 → 6 235

RB3 905 → 6 474

SB4 832 → 8 011

Total cost of modifications157 700

260 400

Talisman cost2 600

Crew training150 000

Experts520 000

Aces2 100

Research Aces950 000

Reward for battleAB / RB / SB

150 / 200 / 240 %

220 / 220 / 220 %

Modifications

Mobility	Protection	Firepower
Tracks Research: 8 400 Cost: 13 000 390 Suspension Research: 6 300 Cost: 9 900 290 Brake System Research: 6 300 Cost: 9 900 290 Filters Research: 8 400 Cost: 13 000 390 Transmission Research: 9 100 Cost: 14 000 420 Engine Research: 9 100 Cost: 14 000 420	Improved Parts Research: 2 500 Cost: 13 000 390 Improved FPE Research: 1 900 Cost: 9 900 290 Smoke grenade Research: 6 300 Cost: 9 900 290 Crew Replenishment Research: 8 400 Cost: 13 000 390 NVD Research: 8 400 Cost: 13 000 390 Side skirts Research: 9 100 Cost: 14 000 420 ESS Research: 9 100 Cost: 14 000 420	Horizontal Drive Research: 8 400 Cost: 13 000 390 115mm_ussr_3BM_21_APDS_FS_ammo_pack Research: 8 400 Cost: 13 000 390 Adjustment of Fire Research: 6 300 Cost: 9 900 290 Laser rangefinder Research: 6 300 Cost: 9 900 290 Elevation Mechanism Research: 8 400 Cost: 13 000 390 115mm_ussr_ATGM_ammo_pack Research: 8 400 Cost: 13 000 390 Artillery Support Research: 9 100 Cost: 14 000 420 115mm_APDS_FS_ammo_pack Research: 9 100 Cost: 14 000 420

Armaments

Laser rangefinder

Reduces the error and increases the maximum measurable distance of the rangefinder

Night vision device

Improves visibility by enhancing natural light or active illumination.

Main armament

115 mm U-5TS cannon

Two-plane stabilizer

Reduces the swing of the gun in two planes while moving

Ammunition42 rounds

First-order16 rounds

Reloadbasic crew → aces

10.4 → 8.0 s

Vertical guidance-5° / 16°

115 mm U-5TS					Turret rotation speed (°/s)					Reloading rate (seconds)
Mode	Capacity	Vertical	Horizontal	Stabilizer	Stock	Upgraded	Full	Expert	Aced	Stock	Full	Expert	Aced
Arcade	42	-5°/+16°	±180°	Two-plane	14.3	19.8	24.0	26.5	28.2	10.40	9.20	8.48	8.00
Realistic					8.9	10.5	12.8	14.1	15.0

Ammunition

• The stock 3BK15M HEATFS has high penetration for its class, but its 500 mm of flat penetration while overkill against steel armour, is less effective versus reactive or composite armour, and deals less post-penetration damage than the APFSDS rounds.
• The 3OF27 HE shell is surprisingly strong and can be lethal against even MBTs; however, it is not as powerful as the 125 mm HE rounds used by top-tier Soviet and Chinese MBTs and needs fine aim for best results. Considering the tank's long reload time, the HE shell is a situational choice.
• The 9M117 gun-launched ATGM has 600 mm of penetration and is mouse-guided. It is the most versatile of the chemical projectiles since it can be used against helicopters, can cause overpressure on lightly-armoured and open-topped vehicles, and has the highest penetration. Taking a few into battle is a good idea.
• The 3BM21 APFSDS far exceeds any of the APFSDS rounds available to the original T-62.
• The 3BM28 APFSDS significantly improves on the angled penetrative performance of 3BM21, at the expense of lower flat penetration.

APFSDS rounds should be the primary ammo choice for the T-62M-1, but its selection of three types of chemical rounds should not be overlooked either.

Penetration statistics
Ammunition	Type of warhead	Penetration @ 0° Angle of Attack (mm)
		10 m	100 m	500 m	1,000 m	1,500 m	2,000 m
3BK15M	HEATFS	500	500	500	500	500	500
3OF27	HE	40	40	40	40	40	40
9M117	ATGM	600	600	600	600	600	600
3BM21	APFSDS	420	415	405	390	380	370
3BM28	APFSDS	386	384	377	369	361	352

Shell details
Ammunition	Type of warhead	Velocity (m/s)	Projectile mass (kg)	Fuse delay (m)	Fuse sensitivity (mm)	Explosive mass (TNT equivalent) (kg)	Ricochet
							0%	50%	100%
3BK15M	HEATFS	1,060	12.2	0.05	0.1	2.28	65°	72°	77°
3OF27	HE	800	17.82	0.3	0.1	4.82	79°	80°	81°
3BM21	APFSDS	1,600	4.55	-	-	-	76°	77°	80°
3BM28	APFSDS	1,600	4.88	-	-	-	78°	80°	81°

Missile details
Ammunition	Type of warhead	Velocity (m/s)	Range (m)	Projectile mass (kg)	Fuse delay (m)	Fuse sensitivity (mm)	Explosive mass (TNT equivalent) (kg)	Ricochet
								0%	50%	100%
9M117	ATGM	370	4,000	18.8	0.05	0.1	4.77	80°	82°	90°

Ammo racks

Ammo racks of the T-62M-1

Full ammo	1st rack empty	2nd rack empty	3rd rack empty	4th rack empty	Visual discrepancy
42	41 (+1)	21 (+21)	17 (+25)	1 (+41)	No

Notes:

• Shells are modeled individually and disappear after having been shot or loaded.
• Rack 4 is a first stage ammo rack. It totals 16 shells and gets filled first when loading up the tank.
  • This rack is also emptied early: the rack depletion order at full capacity is: 4 - 1 - 2 - 3.
  • Simply not firing when the gun is loaded will move ammo from racks 1-3 into rack 4. Firing will interrupt the restocking of the ready racks.
• If you pack 17 (+25) shells, it will fill only the frontal wet stowage ready rack.

Machine guns

12.7 mm DShK machine gun

Ammunition300 rounds

Belt capacity50 rounds

Reloadbasic crew → aces

10.4 → 8.0 s

Fire rate600 shots/min

Vertical guidance-10° / 60°

7.62 mm PKT machine gun (coaxial)

Ammunition3 000 rounds

Belt capacity250 rounds

Reloadbasic crew → aces

10.4 → 8.0 s

Fire rate700 shots/min

12.7 mm DShK
Mount	Capacity (Belt)	Fire rate	Vertical	Horizontal
Pintle	300 (50)	600	-10°/+60°	±180°

7.62 mm PKT
Mount	Capacity (Belt)	Fire rate	Vertical	Horizontal
Coaxial	3,000 (250)	700	-	-

Usage in battles

The T-62M-1 should be played like other high tier Soviet MBTs, though with an higher emphasis on range and cover. Hide your hull and use your almost impenetrable turret armour to deflect hostile fire. If possible, try to use cover to conceal your cannon breech, as a well-placed APFSDS can disable your cannon and, depending on which side of tank you were hit from, kill your gunner or loader. A turret penetration may result in a knock out by a single shot if it hits your ammo. Do not allow yourself to fall into close-range combat areas if at all possible.

Those who have fought and/or used the T-55AM-1 will find the same tactics and assumptions work against the T-62M-1, as well. It performs similarly, mostly just having upgraded the strengths the T-55AM-1 is known for; the turret armour is even better, and the power of the variety of rounds these tanks are known for has been increased, thanks to the increased calibre of the cannon (from 100 mm on the T-55AM-1 to 115 mm on the T-62M-1). This allows the T-62M-1 to have ways of dealing with vehicles all the way up to 9.7.

Thanks to the incredible turret armour, and highly effective and varied ammunition choices, the T-62M-1 is highly suited for a long-range sniping and support role. Players of tanks such as the Chieftain will have an idea of the playstyle. Use your fast and powerful APFSDS rounds to quickly disable targets travelling quickly at ranges out to several kilometres, use your potent HEATFS to dispatch targets at closer ranges, or fire the breech-loaded ATGM for highly accurate shots against exposed targets, both ground and air (especially against helicopters).

Try to avoid close-range engagements at all costs. The T-62M-1 suffers in almost all regards compared to other tanks at closer ranges. Compared to other common tanks, such as the XM-1 (GM), the T-62M-1 has a far longer reload, worse acceleration and top speed, a larger and slower turning circle, and a poorer turret traverse speed. If you get caught out, try to take quick shots to disable the mobility of enemy tanks if you cannot out-right kill them, and make your goal of upmost importance to leave the area immediately. Use your smoke launchers to hide your retreat, and cover your upper frontal plate at all costs; a penetration on the left side of your front plate will spell instant death.

Beware of fast MBTs like the Leopard A1A1, as their mobility allows them to easily flank you and get a shot into your weaker side armour. The T-62M-1 is currently unlikely to face many tanks capable of penetrating its turret composite armour. The majority of deaths will likely result from being shot through weak spots or from flanking, so avoiding these should be your primary concern.

Your tank also has a large amount of weak spots from even the slightest angle above you, so make sure you take enemy helicopters seriously and deal with them as fast as possible. Your gun elevation isn't the greatest, so make sure you use terrain to help lift your gun as well as present thicker armour profiles.

Fighting the T-62M-1

The T-62M-1's core strengths lie in the frontal armour and versatile ammunition choices. Do not attempt to out-snipe a T-62M-1 in anything short of a hull-down British MBT. Instead, abuse the T-62M-1's inferior mobility to out-flank it and quickly disable the gun. At closer ranges with higher penetration shells (260+ mm penetration, chemical or kinetic), shooting the cannon breech can also serve to turn the T-62M-1 into an easy kill.

If you're engaging a wary T-62M-1 at closer ranges, try to bait out a shot or wait until he fires. The T-62M-1, depending on crew skills, has a reload of up to 12 seconds, giving a smart opponent plenty of time to take out a T-62M-1 after he fires. Using smoke to hide a quick change in your position can also work well, as both the T-62M-1 itself and its turret turn slowly compared to vehicles it will face, giving you time to drive around it in the confusion. You can also fire at the lower glacis to knock out the driver and gunner.

Pros and cons

Pros:

• Varied selection of shells - APFSDS, HEATFS, high explosive, and a barrel-launched ATGM for long ranges or dealing with helicopters
• Laser rangefinder and high-velocity ammunition allow long-range engagements
• Tough turret cheek armour for the battle rating, as well as a composite armour add-on on the glacis
• Wet ammunition storage within the frontal fuel tank holds the ready ammunition, reducing vulnerability to HEAT rounds
• Four crew members, compared to three on most Soviet MBTs, increase its survivability on the battlefield
• Frontal composite armour makes the front immune to 105 mm APDS and HEATFS
• Researchable armour package adds panels to the side of the tank which reduce the impact of HEATFS rounds
• Anti-tank guided missile can be fired on the move

Cons:

• Frontal composite armour is not resistant to common APFSDS shells and HEATFS shells larger than 105 mm
• Not very mobile, no neutral steering
• No thermal sights
• Substandard gun handling: mediocre traverse speed
• Three crew members are lined up on the right side of the tank, one shot may knock them out
• Weak gun mantlet, leaving cannon breech highly exposed at closer ranges
• Very long reload time compared to most contemporaries leaving you unable to deliver quick follow-up shots

History

By the early 80s, the USSR began deploying new tanks: the T-72s, the modernized versions of the T-64, and its derivatives, the T-80s. However, the country also had a rather large fleet of "old-school" models that were no longer a match for the newest tanks but still possessed some modernization potential. So, in 1981 the government approved a project on the complex modernization of the T-62s. The aim of the project was to upgrade the defenses and augment the tanks' firepower. Following several radical design changes, the tank's combat effectiveness – despite the resurfaced issues and substantial age of the model – was significantly increased, putting the modified T-62M-1 on the same level as the third-generation tanks.

- From Devblog

Media

Skins

• Skins and camouflages for the T-62M-1 from live.warthunder.com.

Videos

MBTs with Best Armor discusses the T-62M-1 at 00:41 - War Thunder Official Channel

T-62M-1 - The Russian Black Sheep - JustinPlaysYT

The Shooting Range #103 - Metal Beasts section at 04:18 discusses the T-62M-1.

T-62M-1 - High Tier Feelings - First Impressions - Napalmratte

See also

Other vehicles of similar configuration and role

• T-54/55 (Family)

External links

• [Devblog] T-62M-1: the fight continues!
• [Wikipedia] T-62
• [Weapon Systems] T-62M