Difference between revisions of "M1 (76 mm)"

From War Thunder Wiki
Jump to: navigation, search
(Added in extensive history section with citations - Content first written in 2017 and did not transfer with wiki format transition)
m (Combat usage: name fix)
Line 134: Line 134:
 
}}
 
}}
  
In August 1944, an improved ammunition for the 76 mm started to come in, the T4 (M93) HVAP ammo. With its tungsten ammunition, it could penetrate the Panther by the mantlet up to 1,000 yards out. Though 20,000 were ordered, the supply never kept up with demand and only 2,000 of the HVAP ammo arrived by air. The urge to arm tank destroyers like the [[M18 GNC|M18 Hellcat]] and M10 with the HVAP left very little for the tanks, with only 1 round available per tank in September. Even by February 1945, the average load of HVAP per tank was five, meaning an acquiring rate of one HVAP per month a tank. A total of 18,000 HVAP came to Europe by March 1945, with 42% of the total being for the 76 mm and the rest for the 3-inch gun. Still, with the ammunition, it didn't do much to prevent the losses experienced in the Ardennes Offensive in December 1944.<ref name="Zaloga76Sherman"/>
+
In August 1944, an improved ammunition for the 76 mm started to come in, the T4 (M93) HVAP ammo. With its tungsten ammunition, it could penetrate the Panther by the mantlet up to 1,000 yards out. Though 20,000 were ordered, the supply never kept up with demand and only 2,000 of the HVAP ammo arrived by air. The urge to arm tank destroyers like the [[M18 GMC|M18 Hellcat]] and M10 with the HVAP left very little for the tanks, with only 1 round available per tank in September. Even by February 1945, the average load of HVAP per tank was five, meaning an acquiring rate of one HVAP per month a tank. A total of 18,000 HVAP came to Europe by March 1945, with 42% of the total being for the 76 mm and the rest for the 3-inch gun. Still, with the ammunition, it didn't do much to prevent the losses experienced in the Ardennes Offensive in December 1944.<ref name="Zaloga76Sherman"/>
  
 
The Battle of the Bulge turned a few heads for the 76 mm. Before that, German armour were only experienced in little amounts, with only minor counter-offensives at areas like the Battle of Arracourt. There were divided feelings about the 76 mm due to its decreased HE performance compared to the 75 mm and that the 75 mm has specialized ammo like the white phosphorus round that the 76 did not have. Thus, proposals to completely replace the 75 with the 76 were met with objections. But after the Battle of the Bulge, the criticism changed to the inadequacy of the 75 mm against the German tanks like the [[Panther G|Panther]] and the heavier [[Tiger II (H)|Tiger II]]. 12th US Army Group on 29 January 1945 even requested that all US tanks that arrive in Europe be the 76 mm version, refusing anymore 75 mm Shermans.<ref name="Zaloga76Sherman"/>
 
The Battle of the Bulge turned a few heads for the 76 mm. Before that, German armour were only experienced in little amounts, with only minor counter-offensives at areas like the Battle of Arracourt. There were divided feelings about the 76 mm due to its decreased HE performance compared to the 75 mm and that the 75 mm has specialized ammo like the white phosphorus round that the 76 did not have. Thus, proposals to completely replace the 75 with the 76 were met with objections. But after the Battle of the Bulge, the criticism changed to the inadequacy of the 75 mm against the German tanks like the [[Panther G|Panther]] and the heavier [[Tiger II (H)|Tiger II]]. 12th US Army Group on 29 January 1945 even requested that all US tanks that arrive in Europe be the 76 mm version, refusing anymore 75 mm Shermans.<ref name="Zaloga76Sherman"/>

Revision as of 18:20, 5 February 2021

Description

The M1 (76 mm) is a high velocity gun developed by the United States during World War II. Intended to provide the M4 Sherman an increase in firepower to counter the increasing number of heavily armoured German tanks.The M1 in game is a very effective gun, with average penetration and high post penetration damage with the filler round. However, the vehicles it is mounted to can face tanks such as the Panther, Tiger I and Tiger II, which can prove to be difficult targets from a frontal encounter.

Vehicles equipped with this weapon

Vehicles equipped with this weapon
Medium tanks  M4A1 (76) W · M4A2 (76) W · ▂M4A2 · M4A3 (76) W · ▅M4A3 (76) W · T20
Heavy tanks  M4A3E2 (76) W
Tank destroyers  M18 GMC · M18 "Black Cat" · ␗M18 GMC · ▄M18

General info

The M1 (76 mm) is a very capable cannon and can disable or outright destroy most vehicles it can encounter in one shot. It is an ideal armament for mid-rank medium tanks and tank destroyers. For some heavily armoured vehicles, the user may have to aim for weak points or go for side shots.

Available ammunition

The M1 (76 mm) has five shell types available:

  • The M62 shell comes stock with all tanks equipped with the M1 (76 mm) and is the primary shell players will wish to use. It has decent penetration for its rank, punching through 149 mm at 90° at point blank range, and a good amount of explosive filler, the equivalent of 63.7 grams of TNT. This shell will result in the ability to destroy enemy tanks with one successful penetration, but more spacious tanks will require more careful shot placement.
  • The cannon also comes stock with the M42A1 high explosive shell, which has 390 grams of TNT, but is only effective on very lightly armoured vehicles and should not be used in the majority of cases.
  • The M79 shot is unlocked as a tier II modification, and penetrates 134 mm of armour at 90° from 10 meters away. It also has no high explosive filler. This shell is inferior in most aspects compared to the M62 shell, and should not be used.
  • The M93 APCR shot has 190 mm of penetration against 90° armour from 10 meters away, but is ineffective against sloped armour.
  • The M88 Smoke Shell is a very handy munition and can be used for concealment or to blind opponents.

Shells such as the M79 shot, M93 APCR, and M88 Smoke Shell are available as modifications.

Penetration statistics
Ammunition Type of
warhead
Penetration @ 0° Angle of Attack (mm)
10 m 100 m 500 m 1,000 m 1,500 m 2,000 m
M62 shell APCBC 149 146 133 119 106 95
M42A1 shell HE 7 7 7 7 7 7
M79 shot AP 134 132 121 109 99 89
M93 shot APCR 190 186 167 146 128 112
Shell details
Ammunition Type of
warhead
Velocity
(m/s)
Projectile
Mass (kg)
Fuse delay
(m)
Fuse sensitivity
(mm)
Explosive Mass
(TNT equivalent) (g)
Ricochet
0% 50% 100%
M62 shell APCBC 792 7.00 1.2 14.0 63.7 48° 63° 71°
M42A1 shell HE 800 5.84 0.1 0.5 390 79° 80° 81°
M79 shot AP 792 6.80 N/A N/A N/A 47° 60° 65°
M93 shot APCR 1,036 4.22 N/A N/A N/A 66° 70° 72°
Smoke shell characteristics
Ammunition Velocity
(m/s)
Projectile
Mass (kg)
Screen radius
(m)
Screen deploy time
(s)
Screen hold time
(s)
Explosive Mass
(TNT equivalent) (g)
M88 274 3.44 13 5 20 50

Comparison with analogues

The M1 (76 mm) has similar penetrative power to the 85 mm Soviet cannons like the D-5 and ZIS-S-53, but the 85mm has more penetration against sloped armour.

Usage in battles

The M1 (76 mm) is very capable for its rank and in battle it can be used to great effect. The cannon has great one-shot potential with the M62 shell, and it's usable in many situations. It is ideal for flanking, using the good penetration and post penetration damage to get around opponent's heavy front armour and hit them in their weaker side and rear armour.

Pros and cons

Pros:

  • Decent penetrative qualities
  • Very good post-penetration damage
  • Relatively short reload

Cons:

  • Heavily armoured targets requires aiming for weak spots or maneuvring around to hit the side armour

History

Development

During the inter-war period, the Americans had access to the 3-inch Gun M1918 anti-aircraft gun in their inventory that fired a high-velocity 76.2 mm shell. In September 1940, it was decided to adapt the gun into a anti-tank role. Though the adaption was a success with a towed variant and mounted on the M10 tank destroyer, it was too heavy and cumbersome for a medium tank mount. Sometime in 1942, the development of a new gun to replace the 75 mm on the M4 Sherman's mount began as the 76 mm Gun T1. It should be noted that despite the name, it has the same exact bore as 3-inch (76.2 mm) and is only named such to avoid ammo compatibility error between the 3-inch and the 76 mm. The developed 76 mm used a barrel lighter than the 3-inch, had the breech ring assembly of the 75 mm, and could be mounted in the Sherman's M34 mount. The gun used a shell that used the same projectiles as that of the 3-inch, but a different propellant case design with enough powder to fire a round at 2,600 ft/sec muzzle velocity, identical to the 3-inch gun.[1][2][3]

Two 76 mm T1 guns were made and shipped to Aberdeen Proving Grounds. Tests started in 01 August 1942, with one gun put on a fixed mount while the other was installed in a turret of the M4A1 in place of the 75 mm. Initial tests showed that the gun, 57 caliber in length, was too unbalanced. 15 inches were shaved off from the gun barrel and turned the barrel length to 52 caliber to the detriment of the anti-armour performance, additionally with weight added to the breech ring as a counter weight.[3] On August 17, Aberdeen stated the 76 mm was satisfactory inside the M4 Sherman turret. Classified as Substitute Standard, the 76 mm T1 was approved as the 76 mm Gun M1 and was recommended that the production orders for Shermans be modified for 1,000 Shermans with the 76 mm gun. However, General Jacob Devers from Armored Force did not approve of this plan as the new tanks had not been tested by his board. This led to another trial period, with the 76 mm tried in the newer M34A1 gun mount using the telescopic sight from combat experience in North Africa.[3] The same imbalance issue as previous tests arose, but this was solved by adding an 800 pound counterweight was simply added to the rear of the turret to counterbalance the barrel. Production of the tank started with 12 tanks from the Pressed Steel Car Company for evaluation by Aberdeen, Armored Board, and Tank Destroyer Board. These tanks arrived in 2 February 1943 and tests lasted April 5. The conclusion was that the Armored Board found the constrained space in the turret caused by the larger gun unsatisfactory and the tank was a rushed "quick-fix" design and rejected the tank. This cancelled the type classification and brought the 76 mm tank procurement to a halt.[1]

Ordnance continued to tinker about with their designs and on 3 May 1943, recommended the production of two pilots of an improved 76 mm gun mount for the Sherman. These vehicles were designated as the M4E6 and were fitted with turrets from the T23 of the T20 tank series.[1] Meanwhile, the 76 mm gun was also improved into the M1A1 variant with a changes to the tube contour and a lengthened recoil surface to allow the trunnions to be moved forwards for better balancing of the weapon.[2] The two M4E6 were built by Chrysler, with one sent for evaluations at Aberdeen in July 1943 before being sent to Fort Knox for Armored Board to take a look.[1] The tests proved satisfactory and on 17 August 1943, Armored Board recommended the M4E6 be put into full production for 1,000 units, with even the possibility of completely replacing the 75 mm production with the 76 mm. The latter however was contested by General Alvan Gillem, who took over Devers role in May 1943, by stating the 76 mm's flaw of a lower HE charge compared to the 75 mm (76 mm's 12.37lbs HE shell carries only 0.86lbs explosives whereas the 75 mm's 14.6lbs shell carries 1.47lbs explosives) and its tendency to create dust clouds with its muzzle blast, all for only 1 more inch of armor penetration compared to the 75 mm.[3]

Still, 76 mm production was still in consideration and further improvements were made to the gun. The issue with the muzzle blast was solved with the new long primer ammunition that reduced the smoke left from the burning powder and the installment of a muzzle brake on the gun that diverted the muzzle blast sideways so it does not disturb the dust. The improvement of the muzzle brake led to the request that all 76 mm guns be fitted with a muzzle brake. 76 mm Gun M1 retooled with a threaded end for the muzzle brake were designated the M1A1C, though production of muzzle brakes for these threads did not begin until July 1944, so the threads were covered by a thread protector until muzzle brakes were available. The next model of the 76 mm, the 76 mm Gun M1A2, featured more improvements. The rifling on the gun was tighter with a one turn per 32 caliber rather than the one turn per 40 caliber on previous models, which helped improve ballistics at longer ranges. Every M1A2 design also had a muzzle brake attached.[1][3]

Combat usage

The first batch of 130 M4A1 (76) Shermans were sent to Britain on 10 April 1944, but despite their presence and even reports at the Italian Theater facing some of Germany's newer vehicles like the Panther that the 76 mm was necessary, they were not sent to Normandy on the onset of D-Day. Major General Hugh Gaffey of the 2nd Armored Division advocated for this decision as there were only so few of them available, they were not properly trained on by the troops, and logistic situation would be a mess to supply the ammunition. As such, it was proposed by General W.B. Palmer that the 76 mm be delayed for tank battalions and only specified for such battalions rather than intermingling the 76 mm and 75 mm in mixed units. Either way, not one 76 mm Sherman landed in France in June 1944. Even attempts to interest Third Army on 12 June 1944 fell short as a report went "All of the commanders were relunctant to see it take the place of the 75 mm tank gun in any quantity". The reason for this desire to keep around with the 75 is the belief that the 75 mm could still do the job defeating enemy armour as the newer tanks like the Tiger I have been around since Tunisia and there was no large alarm of a inferiority of their armament. Even the Panther were not taken seriously, not necessarily because it could be handled by the 75 mm, but because it was believed that Panther was a specialized heavy tank allocated in small numbers. It was not until Normandy that the U.S. fighting forces would experience first hand how numerous the Panthers were.[3]

By Normandy in June 1944, criticism from tankers on the ineffectiveness of the 75 mm on the new Panthers came to light. On July 2, Eisenhower relayed the complaints to Ordnance and in July 12, a board was created to determine what weapons were available that could defeat the Panther. The board determined after tests at Isigny that none of the U.S. standard weapons could defeat the Panther from the front, and the 3-inch on the M10 could only do so on the gun mantlet from 200 yards outs. Suddenly, the 76 mm Shermans sitting idly at Britain became very sought out and General Bradley of 1st US Army ordered as many of the 76 mm Shermans be sent into France for Operation Cobra. 102 M4A1 (76) tanks arrived to France and became a key part of the operation, marking their debut of combat on 25 July 1944 on the second day. The success of the operation helped vindicate the relevance of the 76 mm Sherman and new 76 mm tank models on the M4 and the M4A3 soon arrived in September 1944. However, the 76 mm Shermans, now combat tested, ended up in another pitfall when they still proved ineffective against the Panther's front. Eisenhower, when hearing of the issue, remarked on the predicament:

Quote icon.png

You mean our 76 won't knock these Panthers out? Why, I thought it was going to be the wonder gun of the war. Why is it that I'm the last to hear about this stuff? Ordnance told me this 76 would take care of anything the Germans had. Now I find you can't knock out a damn thing with it.

— General Dwight D. Eisenhower[4]

In August 1944, an improved ammunition for the 76 mm started to come in, the T4 (M93) HVAP ammo. With its tungsten ammunition, it could penetrate the Panther by the mantlet up to 1,000 yards out. Though 20,000 were ordered, the supply never kept up with demand and only 2,000 of the HVAP ammo arrived by air. The urge to arm tank destroyers like the M18 Hellcat and M10 with the HVAP left very little for the tanks, with only 1 round available per tank in September. Even by February 1945, the average load of HVAP per tank was five, meaning an acquiring rate of one HVAP per month a tank. A total of 18,000 HVAP came to Europe by March 1945, with 42% of the total being for the 76 mm and the rest for the 3-inch gun. Still, with the ammunition, it didn't do much to prevent the losses experienced in the Ardennes Offensive in December 1944.[3]

The Battle of the Bulge turned a few heads for the 76 mm. Before that, German armour were only experienced in little amounts, with only minor counter-offensives at areas like the Battle of Arracourt. There were divided feelings about the 76 mm due to its decreased HE performance compared to the 75 mm and that the 75 mm has specialized ammo like the white phosphorus round that the 76 did not have. Thus, proposals to completely replace the 75 with the 76 were met with objections. But after the Battle of the Bulge, the criticism changed to the inadequacy of the 75 mm against the German tanks like the Panther and the heavier Tiger II. 12th US Army Group on 29 January 1945 even requested that all US tanks that arrive in Europe be the 76 mm version, refusing anymore 75 mm Shermans.[3]

The 76 mm faced more than a fair share of criticism throughout its life. Promised to give a bigger punch than the 75 mm, it fell short with changing times against improving German armor as it was design created with a mindset of German armour in 1942. Still, as a tank gun, the 76 mm did its job as best it could against the opposition, and was still overall a better gun in several respects that after the war, the 76 mm were retained on the M4A3E8 Sherman. In the 1950s in the Korean War, the 76 mm still proved adequate against the Soviet T-34-85 and no complaints were made on the Sherman's role as an infantry support during the latter stages of the war.[5] Though, as the armament of the evolving U.S. tank force, the 76 mm Gun M1 was succeeded by the much bigger and better M3 (90 mm) that would be the armament of the M26 Pershing and its successors.

Media

Videos

See also

Links to the articles on the War Thunder Wiki that you think will be useful for the reader, for example:

  • reference to the article about the variant of the cannon/machine gun;
  • references to approximate analogues by other nations and research trees.

External links

References

  1. 1.0 1.1 1.2 1.3 1.4 Hunnicutt 1978
  2. 2.0 2.1 Hunnicutt 1971
  3. 3.0 3.1 3.2 3.3 3.4 3.5 3.6 3.7 Zaloga 2003
  4. Zaloga 2003, Loc.359 of 977
  5. Zaloga 2010

Bibliography

  • Hunnicutt, R.P. Sherman: A History of the American Medium Tank U.S.A.: Feist Publications, 1978
  • Hunnicutt, R.P. Pershing: A History of the Medium Tank T20 Series U.S.A.: Feist Publications, 1971
  • Zaloga, Steven. M4 (76mm) Sherman Medium Tank 1943-65 Great Britain: Osprey Publishing Ltd., 2003
  • Zaloga Steven. T-34-85 vs M26 Pershing: Korea 1950 Great Britain: Osprey Publishing Ltd., 2010


USA tank cannons
20 mm  M139
25 mm  LW25 · M242
37 mm  M3 · M5 · M6
57 mm  M1
75 mm  M2 · M2 Howitzer · M3 · M6 · M1897A4 · XM274
76 mm  M1 · M7 · M32 · T185E1
90 mm  M3 · M3A1 · M36 · M41 · M54 · T15E1 · T15E2 · T54 · T208E9
105 mm  M4 · M68 · M68A1 · M68A1E8 · T5E1 · T5E2 · T140E2 · T140E3 · XM35
106 mm  M40A1C
120 mm  M58 · M256 · T53
152 mm  M81 · M162 · XM150E5
155 mm  M185 · T7
165 mm  M135
  Foreign:
20 mm  Rh202 (Germany)
57 mm  6pdr OQF Mk.III (Britain) · ZIS-2 (USSR)
105 mm  Sharir (Israel)
120 mm  IMI MG251 (Israel)

USSR tank cannons
20 mm  TNSh
30 mm  2A42 · 2A72 · AG-30
45 mm  20-K
57 mm  AU-220 · Ch-51M · ZIS-2 · ZIS-4 · ZIS-4M
73 mm  2A28
76 mm  1902/30 · 3-K · D-56TS · F-32 · F-34 · F-96 · KT-28 · L-10 · L-11 · ZIS-3 · ZIS-5
85 mm  D-5S · D-5T · D-58 · D-70 · F-30 · ZIS-S-53
100 mm  2A48 · 2A70 · D-10S · D-10T · D-10T2S · D-50 · LB-1 · S-34
107 mm  ZIS-6
115 mm  U-5TS
122 mm  A-19 · D-25-44T · D-25S · D-25T · D-25TS · D-30T · D-49 · M-30 · M-62-T2S
125 mm  2A26 · 2A46 · 2A46M · 2A46M-1 · 2A46M-4 · 2A46M-5 · 2A46MS · 2A75 · D-126
130 mm  B-13 · C-70 · M-65
152 mm  2A33 · LP-83 · M-10T · M-64 · M-69 · ML-20S
  Foreign:
37 mm  M5 (USA)
50 mm  KwK L/42 (Germany)
57 mm  6pdr OQF Mk.III (Britain) · M1 (USA)
75 mm  KwK42 (Germany) · M2 (USA)
76 mm  M1 (USA)
85 mm  Type-62-85-TC (China)

Japan tank cannons
37 mm  Type 94 · Type 100 · Type 1
47 mm  Type 1
57 mm  Type 90 · Type 97
70 mm  Type 94
75 mm  Type 90 · Type 99 · Type 3 · Type 5 (Type I Model II · Type II Model I · Type II Model II)
90 mm  Type 61
105 mm  Type 5 (Experimental · Production) · JSW L/52
106 mm  Type 60 (B)
120 mm  Taishō Type 10 · Navy short gun · Type 90 L/44 · Type 10 L/44
150 mm  Type 38
155 mm  NSJ L/30 · JSW L/52
  Foreign:
25 mm  Oerlikon KBA B02 (Switzerland)
30 mm  Bushmaster 2 Mk.44 (USA)
35 mm  Oerlikon KDE (Switzerland)
75 mm  M6 (USA)
76 mm  M1 (USA) · M32 (USA)
88 mm  KwK36 (Germany)
90 mm  M3A1 (USA) · M36 (USA)
105 mm  L7A3 (Germany)
120 mm  Schneider-Canet 1898 (France)

China tank cannons
30 mm  ZPL02 · ZPZ02
73 mm  Type 86
76 mm  M32K1
85 mm  Type 56 · Type 63
100 mm  PTP86 · Type 59 · Type 69 · Type 69-II · ZPL04
105 mm  88B-105T · Type 83 · WMA301 · ZPL94 · ZPL98A
120 mm  122TM · PTZ89
125 mm  Type 88C · Type 99A · ZPT98
130 mm  PL59A Gai
152 mm  PL66 Gai
  Foreign:
20 mm  KwK30 (Germany)
37 mm  M6 (USA)
45 mm  20-K (USSR)
47 mm  Type 1 (Japan)
57 mm  Type 97 (Japan) · ZIS-2 (USSR)
75 mm  M2 Howitzer (USA) · M3 (USA) · M6 (USA)
76 mm  D-56T (USSR) · F-34 (USSR) · M1 (USA) · M7 (USA) · ZIS-3 (USSR)
85 mm  ZIS-S-53 (USSR)
90 mm  M3 (USA) · M41 (USA)
100 mm  D-10S (USSR)
105 mm  M68 (USA) · M68A1 (USA)
115 mm  U-5TS (USSR)
122 mm  A-19 (USSR) · D-25T (USSR)
152 mm  ML-20S (USSR)

Italy tank cannons
20 mm  Breda Mod.35 · Fucile Controcarri S Mod.39
25 mm  Oerlikon KBA B02
37 mm  Vickers-Terni 37/40 mod.18
47 mm  47/32 mod.35 · 47/32 mod.39 · 47/40 mod.38
60 mm  Cannone da 60/70 · OTO HVG
75 mm  75/18 mod.34 · 75/32 mod.37 · 75/34 mod.39 · Ansaldo 75 L/34 · OTO 75/43 mod.40
90 mm  90/53 mod.41 · Cannone da 90/50 M3A1 · Cockerill Mk.3
100 mm  Cannone da 100/17 Mod.1914
105 mm  Cannone Ansaldo da 105/25 · OTO Melara 105/52 · OTO Melara 105/55
106 mm  Cannone da 106 s.r.M40A1
120 mm  OTO Breda 120/44 · OTO Melara 120/45
  Foreign:
30 mm  Bushmaster 2 Mk.44 (USA)
37 mm  M6 (USA)
75 mm  KwK37 (Germany) · KwK40 L48 (Germany) · M3 (USA) · M6 (USA) · StuK40 L48 (Germany)
76 mm  M1 (USA) · QF 17-pounder (Britain)
90 mm  M3 (USA)
105 mm  L7A3 (Germany) · M68 (USA)
155 mm  M126 (USA)
  Hungary
20 mm  Solothurn QF.36M
40 mm  37/42M · MÁVAG 41.M 40/51
75 mm  41.M · 43.M
105 mm  MÁVAG 40/43M
  Foreign:
30 mm  2A72 (USSR) · MK 30-2/ABM (Germany)
88 mm  KwK36 (Germany)
120 mm  Rh120 L/44 (Germany) · Rh120 L/55 A1 (Germany)
122 mm  2A31 (USSR)
125 mm  2A46 (USSR)