Difference between revisions of "L8A2 (7.62 mm)"
(Fixed table) (Tag: Visual edit) |
(Added commas) (Tag: Visual edit) |
||
Line 26: | Line 26: | ||
! 100m | ! 100m | ||
! 500m | ! 500m | ||
− | ! | + | ! 1,000m |
− | ! | + | ! 1,450m |
− | ! | + | ! 1,500m |
|- | |- | ||
| AP || 10 || 9 || 7 || 4 || 1 || 0 | | AP || 10 || 9 || 7 || 4 || 1 || 0 |
Revision as of 20:26, 10 February 2019
Contents
Description
The L8A2 is a British 7.62mm General Purpose Machine Gun (GPMG), it is an Enfield L7 GPMG with modifications to make it suitable for use as a tank co-axial machine gun, in game it is found as the co-axial machine gun for the Challenger Mk.2 and Challenger Mk.3. The Enfield L7 GPMG of which the L8A1, L8A2, L37A1 and L37A2 are all variants, is itself a British licence-built version of the Belgian FN MAG GPMG. As such the L8A2 performs identically to the FN MAG and L8A1 and almost identically to the L37A1 and L37A2. Being only a 7.62mm machine gun it is largely ineffective against all but the most weakly armoured, or open cabin, vehicles.
Vehicles equipped with this weapon
The L8A2 is used as the co-axial machine gun on the Challenger 1 series of tanks, these are the:
General info
The L8A2 performs identically to the L8A1 and FN MAG machine guns, while the only difference between it and the L37A1 and L37A2 is a marginally higher rate of fire on the L37 versions.
Available shells
Like the the L8A1, the L8A2 can only be equipped with one ammo belt consisting of two Armour Piercing (AP) bullets, followed by one Tracer (T) bullet. Neither bullet has much penetration (maximum of 10mm), however the AP bullet performs much better than the tracer bullet.
Penetration statistics | |||||||
---|---|---|---|---|---|---|---|
Ammunition | Penetration in mm @ 90° | ||||||
10m | 100m | 500m | 1,000m | 1,450m | 1,500m | ||
AP | 10 | 9 | 7 | 4 | 1 | 0 | |
T | 5 | 4 | 2 | 1 | 0.1 | 0 |
Shell details | |||||||||
---|---|---|---|---|---|---|---|---|---|
Ammunition | Velocity in m/s |
Projectile Mass in kg |
Fuse delay
in m: |
Fuse sensitivity
in mm: |
Explosive Mass in g (TNT equivalent): |
Normalization At 30° from horizontal: |
Ricochet: | ||
0% | 50% | 100% | |||||||
AP | 853 | 0.0108 | N/A | N/A | N/A | ??° | ??° | ??° | ??° |
T | 835 | 0.0095 | N/A | N/A | N/A | ??° | ??° | ??° | ??° |
Comparison with analogues
The L8A2 performs identically to the L8A1 and FN MAG machine guns, while having a slightly lower rate of fire than the L37A1 and L37A2. It has the same ballistic performance as the L3A1 found on previous British Vehicles, but has a higher rate of fire.
Usage in the battles
Due to the very low penetration this weapon it is largely ineffective against enemy armour (although you may be able to penetrate some vehicles with extremely thing armour). The gun is primarily useful for killing exposed crew members in open topped vehicles (although there are few such vehicles at the battle ratings this gun is found at). The gun can also be used for marking enemy vehicles and obscuring the view of enemy players (shooting at their gun sight). You can use the gun against aircraft however it does minimal damage, and being co-axially mounted means it can often not be brought / kept on target against aircraft.
Pros and cons
Pros:
- Better rate of fire than L3A1 machine gun
Cons:
- Lower rate of fire than the L37A1 and L37A2 machine guns found on later tanks
- Low penetration makes it ineffective against armour
- Low Damage
Historical part
Along with the L8A1, L37A1 and L37A2 the L8A2 is a British License built variant of the Belgian FN MAG GPMG. The FN MAG is a Belgian 7.62 mm general-purpose machine gun, it was designed in the early 1950s by Ernest Vervier, while working at the weapons company Fabrique Nationale (FN). Between 1956 and 1957 the British armed forces trialled the FN MAG against the american M60, and selected the FN MAG. The MAG was built under license as the L7 GPMG by Enfield in Britain, with minor modifications being made. It entered service under the Designation L7A1 in 1963.
The L8A1 variant was designed for co-axial use, primarily in the Chieftain series of Main Battle Tank (MBT). It was modified with a fume extractor, removal of the shoulder stock, and a folding pistol grip, in order to allow the weapon to function better in the confined space available inside a tank. The L8A2 is an upgraded L8A1, with an improved feed system.
Media
An excellent addition to the article would be a video guide, as well as screenshots from the game and photos.
Read also
Sources
Military Factory - Enfield L7 General Purpose Machine Gun (GPMG)
Tank machine guns | |
---|---|
USA | |
7.62 mm | M37 · M60D · M73 · M240 · M1919A4 · Mk.52 |
12.7 mm | FN M3P · M2HB · M80 · M85 |
Germany | |
5.56 mm | MG4 |
7.62 mm | C6 · MG3A1 |
7.92 mm | MG13 Dreyse · MG34 · MG37(t) · MG42 |
12.7 mm | S.MG.50 |
USSR | |
7.62 mm | DT · PKMB · PKT · PKTM · RP-46 · SGMT |
12.7 mm | DK · DShK · 6P49 · NSVT |
14.5 mm | KPVT |
Britain | |
7.62 mm | Browning MG4 · L3A1 · L8A1 · L8A2 · L37A1 · L37A2 · L94A1 |
7.7 mm | Vickers |
7.92 mm | BESA |
12.7 mm | L21A1 |
Japan | |
6.5 mm | Type 91 |
7.62 mm | Type 74 |
7.7 mm | Type 97 |
12.7 mm | Type 60 (B) |
China | |
5.8 mm | QJT |
7.62 mm | Type 55 · Type 59 · Type 86 |
12.7 mm | QJC88A · Type 54 |
14.5 mm | QJG02 |
Italy | |
7.62 mm | Beretta MG42/59 · FN MAG 60-40 |
8 mm | 34/40M · Breda Mod. 38 |
13.2 mm | Breda Model 31 |
France | |
7.5 mm | AAT-52 · MAC 31 |
7.62 mm | A-A-F1N |
8 mm | Hotchkiss Mle 1914 |
Sweden | |
6.5 mm | ksp m/14-29 |
7.62 mm | ksp 39 C · ksp 58 · ksp 94 |
8 mm | ksp m/36 · ksp m/39B |
12.7 mm | ksp 88 |