M4A1 (France)

This page is about the medium tank M4A1 (France). For other M4 Shermans, see M4 Sherman (Family). For other uses, see M4 (Disambiguation).

▄M4A1

▄M3A3 Stuart

▄M4A4

▄M4A1

▄M3A3 Stuart

▄M4A4

France

II Rank

Battle rating:

AB	RB	SB
3.3	3.3	3.3

Class:

Medium tank

Research:14 000

Purchase:32 000

Show in game

Description

The ▄M4A1 Sherman is a rank II French medium tank with a battle rating of 3.3 (AB/RB/SB). It was introduced in Update 1.75 "La Résistance". At its BR, the M4A1 Sherman is a very capable medium tank perfect for an aggressive play style due to its ability to react quickly and fire relatively accurately while on the move.

General info

Survivability and armour

Armourfront / side / back

Hull51 / 38 / 38

Turret76 / 51 / 51

Crew5 people

Visibility103 %

Armour type:

• Cast homogeneous armour (hull, turret, cupola)
• Rolled homogeneous armour (hull side - bottom)

Armour	Front (Slope angle)	Sides	Rear	Roof
Hull	19.5 mm (63-84°) Front glacis - Upper section 50.8 mm (48-63°) Front glacis - Centre section 34 + 25.4 mm (spherical) MG port 38.1 mm (spherical) Front glacis - Sides 50.8 mm (cylindrical) Transmission housing	38.1 mm (1-24°) Top 38.1 mm Bottom	38.1 mm Upper plate 38.1 mm (13°) Lower plate 38.1 mm (50°) Lower glacis	50.8 mm (27-39°) Front glacis 19.5 mm (0-28°) Turret area 19.5 mm (7°) Engine bay - centre 19.5 mm (20-24°) Engine bay - sides
Turret	50.8-76.2 mm (18-71°) Turret front 50.8 + 76.2 mm (cylindrical) Gun mantlet	50.8 mm (cylindrical)	50.8 mm (4°)	25.4 mm
Cupola	50.8 mm (spherical)			50.8 mm (spherical) Outer ring 25.4 mm Centre

Notes:

• Suspension wheels are 15 mm thick while bogies are 10 mm thick and tracks are 20 mm thick.
• Belly armour is 12.7 mm thick.
• A small patch on the turret front right side is thinner (50.8 mm) than the rest (76.2 mm).
• Bolt edges on the transmission housing are 101.6 mm thick.

The M4A1 is distinctive from its cast hull construction, causing it to have a curved hull shape. The front glacis armour has varying slope angles that can make shots bounce but also presents several weaknesses. The biggest is in the hull front and side joints with slightly flat angles when angling the tank, another major one is the cast construction which diminishes the labeled effectiveness of the front armour. Though its armour is still effective against certain enemy fire, one must take into account the very thin side armour (38.1 mm): anti-tank weaponry of any rank will be capable of penetrating this weak side armour so protect your flank.

Mobility

Speedforward / back

AB43 / 6 km/h

RB and SB39 / 6 km/h

Number of gears5 forward

1 back

Weight30.6 t

Engine power

AB763 hp

RB and SB400 hp

Power-to-weight ratio

AB24.9 hp/t

RB and SB13.1 hp/t

Game Mode	Max Speed (km/h)		Weight (tons)	Engine power (horsepower)		Power-to-weight ratio (hp/ton)
	Forward	Reverse		Stock	Upgraded	Stock	Upgraded
Arcade	43	6	30.6	620	763	20.26	24.93
Realistic	39	6		354	400	11.57	13.07

Beware of the very poor reverse speed as it only has one reverse gear. This affects the tank's ability to play in a defensive role.

Modifications and economy

Repair costBasic → Reference

AB873 → 1 123

RB1 003 → 1 290

SB1 247 → 1 604

Total cost of modifications13 860

19 850

Talisman cost860

Crew training9 200

Experts32 000

Aces270

Research Aces250 000

Reward for battleAB / RB / SB

50 / 80 / 90 %

130 / 130 / 130 %

Modifications

Mobility	Protection	Firepower
Tracks Research: 920 Cost: 1 300 115 Suspension Research: 620 Cost: 890 75 Brake System Research: 620 Cost: 890 75 Filters Research: 1 200 Cost: 1 700 150 Transmission Research: 1 100 Cost: 1 600 135 Engine Research: 1 100 Cost: 1 600 135	Improved Parts Research: 920 Cost: 1 300 115 Improved FPE Research: 620 Cost: 890 75 Crew Replenishment Research: 1 200 Cost: 1 700 150	Horizontal Drive Research: 920 Cost: 1 300 115 Adjustment of Fire Research: 620 Cost: 890 75 75mm_usa_APCBC_ammo_pack Research: 620 Cost: 890 75 Elevation Mechanism Research: 1 200 Cost: 1 700 150 Artillery Support Research: 1 100 Cost: 1 600 135 75mm_us_M89_Smoke_ammo_pack Research: 1 100 Cost: 1 600 135

Armaments

Main armament

75 mm M3 cannon

Vertical stabilizer

Reduces the swing of the gun in one plane while moving

Ammunition90 rounds

Reloadbasic crew → aces

6.5 → 5.0 s

Vertical guidance-12° / 18°

75 mm M3					Turret rotation speed (°/s)					Reloading rate (seconds)
Mode	Capacity	Vertical	Horizontal	Stabilizer	Stock	Upgraded	Full	Expert	Aced	Stock	Full	Expert	Aced
Arcade	90	-12°/+18°	±180°	Vertical max 24km/h	22.85	31.62	38.40	42.47	45.18	6.50	5.75	5.30	5.00
Realistic					14.28	16.80	20.40	22.56	24.00

The 75 mm M3 gun is mounted in the M34 gun mount with the periscopic, a skinny gun mount compared to the future M34A1 which all future 75 mm M4 Sherman guns are mounted. This lowers the area the gun mantlet covers to contribute to turret front armour, but does present a slightly greater gun depression by -2° than the future M34A1 mounts. Combined with the very fast turret traverse rate, fast reload time of 6.5 seconds and a vertical gun stabilizer, the 75 mm M3 cannon is capable of destroying nearly all armoured targets. The gun depression angle of -12° also makes this tank excel in hull down positions.

Ammunition

When discussing the M4A1's shells, one always has to account for the fact that it's a medium tank. This means short to medium engagement range, so realistically it can benefit more from its short-range penetration figures than long-range sniping tanks would.

• M72 shot - AP - Solid shot, stock shell. An armour-piercing shell with acceptable penetration but poor post-penetration damage.
• M48 shell - HE - A low-velocity shell useful against soft targets, in particular when hitting an open-topped vehicle. Harmless against any enclosed vehicle with more than 10 mm of armour.
• M61 shot - APCBC - A capped armour-piercing shell with a better penetration than the M72 thanks to its ballistic cap and a good post-penetration damage thanks to its explosive filler.
• M89 smoke shell - A shell deploying a smoke screen on impact, useful to blind enemy vehicles that are too remote for you to disable so that you can progress towards objectives.

Penetration statistics
Ammunition	Type of warhead	Penetration @ 0° Angle of Attack (mm)
		10 m	100 m	500 m	1,000 m	1,500 m	2,000 m
M72 shot	AP	91	88	78	67	57	49
M48 shell	HE	10	10	10	10	10	10
M61 shot	APCBC	104	101	90	78	68	59

Shell details
Ammunition	Type of warhead	Velocity (m/s)	Projectile Mass (kg)	Fuse delay (m)	Fuse sensitivity (mm)	Explosive Mass (TNT equivalent) (g)	Ricochet
							0%	50%	100%
M72 shot	AP	619	6.30	N/A	N/A	N/A	47°	60°	65°
M48 shell	HE	463	6.30	0.0	0.5	666	79°	80°	81°
M61 shot	APCBC	618	6.79	1.2	14	63.7	48°	63°	71°

Smoke shell characteristics
Ammunition	Velocity (m/s)	Projectile Mass (kg)	Screen radius (m)	Screen deploy time (s)	Screen hold time (s)	Explosive Mass (TNT equivalent) (g)
M89	259	3.0	13	5	20	50

Ammo racks

Ammo racks of the M4A1 (identical).

Full ammo	1st rack empty	2nd rack empty	3rd rack empty	4th rack empty	5th rack empty	6th rack empty	7th rack empty	8th rack empty	Visual discrepancy
90	82 (+8)	75 (+15)	72 (+18)	70 (+20)	54 (+36)	38 (+52)	22 (+68)	1 (+89)	Yes

Notes:

• The visual discrepancy concerns rack 8: 28 shells are modeled but it contains only 21 shells.
• Racks disappear after you've fired all shells in the rack.
• Flanks and turret empty: 22 (+68) shells.

Machine guns

12.7 mm M2HB machine gun

Ammunition600 rounds

Belt capacity200 rounds

Reloadbasic crew → aces

10.4 → 8.0 s

Fire rate575 shots/min

Vertical guidance-10° / 22°

Horizontal guidance-60° / 60°

7.62 mm M1919A4 machine gun (coaxial)

Ammunition3 000 rounds

Belt capacity250 rounds

Reloadbasic crew → aces

10.4 → 8.0 s

Fire rate500 shots/min

12.7 mm M2HB
Mount	Capacity (Belt)	Fire rate	Vertical	Horizontal
Pintle	600 (200)	577	-10°/+22°	±60°

The roof-mounted M2HB .50 cal heavy machine gun is very good at knocking out tracks, punching through lightly armoured vehicles and shooting down low-flying aircraft. Use it sparsely because of its low ammo count.

7.62 mm M1919A4
Mount	Capacity (Belt)	Fire rate	Vertical	Horizontal
Coaxial	3,000 (250)	500	N/A	N/A

The small calibre of the M1919A4 machine gun makes it largely ineffective against all armoured vehicles but the ones with an open compartment. It still can be used to ping targets as a rangefinding help or to mow down minor obstacles blocking your line of sight.

Usage in battles

As prior stated, the M4A1 Sherman plays best in an aggressive role. Firing on the move is not a difficult task with this tank due to the vertical stabilizer. Take advantage of this tank's immense gun depression of -12°.

The tall profile of the tank is an advantage and disadvantage. In the context of a hull-down position, it is an advantage due to you being able to angle the turret down over a hill or crest without having to pull further up the hill. The tall profile, however, does make you more visible and the tall hull makes it easy to set off an ammo rack.

Enemies worth noting:

M4A2 / A4: these Sherman tanks are widely used by over 3 nations that spread across both the Allied and the Axis side, so no matter which nation you play they can be quite tough to destroy in the hands of a skilled tanker. Given the rather weak penetration of your short 75mm gun, their hull can be almost impossible to penetrate when angled, hull down or 300m away. For a M4A4, there are 2 apparent bulges on the upper front plate, a penetration through there is a guaranteed kill most of the times. But in case the opponent covers them up or when it's a M4A2, aim for the middle parts of the gun mantlet or the turret armor unprotected by the mantlet, you can at least make them defenseless. Note that their guns are equally weak against you, so wiggle around to disrupt their aim while you reload, you have a good chance of bouncing some shells.

KV I C 756 (r):

A vehicle that the M4 Sherman will have trouble against is this German KV-1. While the L-11 is underpowered, the ZiS-5 is potent enough to punch through the Sherman's front, and the Sherman is unable to penetrate the KV-1's thick armour especially with its add-on armour plates. If this heavy tank is encountered and it's angling the hull, aim at the gun mantlet as it is only 50 mm thick. You can knock out its gunner easily. Or shoot at the thin cupola, there's also some chance to kill the gunner. Of course, the best way is to shoot at its sides and rear without any angle, where its armour is unsloped, though it will still have to be at a close range to penetrate the armour. In addition, shots to the sides will most likely hit fuel tanks or ammunition storage, causing a fire or ammunition detonation and at best, time to reassess the situation.

Churchill I, Churchill III, Pz.Kpfw. Churchill:

The Churchills, with their complex hulls and sturdy turrets, can be quite hard to kill at range. Again, manoeuvre as close to them as possible, the ideal distance being no more than 200 m. If they are angling their hull but facing their turret at you, only go for the turret. For the Mk I Churchills, aim at the near-vertical part of their rounded cheeks to ensure successful penetrations. For the Mk III and the German Churchill, also aim for their flat turret which is at most 89 mm. The shell should go in easily and knock out most, if not all of the crew. Only when you are facing their hull without any angles should you shoot the hull, otherwise shoot the turret only, as their big tracks can easily get in front of the frontal hull. The side hull have multiple layers of armour, some of which are weirdly angled and can absorb plenty of shells.

Pz.IV F2/G/H/J:

The historical nemesis of any Sherman, the Panzer IV is one of the Sherman's biggest threats at this rank. The long barrel 75 mm gun will easily penetrate the Sherman from the front. The F2 variant is admittedly easy to deal with. A single APCBC to its hull or turret should end it pretty quickly, even at long range. The other variants are slightly harder to deal with. They have thicker hull armour, at 80 mm, which will be much harder to penetrate with the APCBC over 500 m. Luckily the turret armour remains the same at 50 mm. Either aim here with APCBC or sacrifice damage potential and use the AP round to penetrate the hull.

StuG III F/G:

Another historical nemesis of the Sherman, and another big threat. The StuG III packs the same punch as the Panzer IV line with its long barrel 75 mm gun, whilst losing the turret, which turns out to be both an advantage and a disadvantage. Lacking a turret means that it will have to traverse the whole vehicle to target an enemy, but it also means that it has a lower profile. The StuG's armour profile is also more complex than the Panzer IV, with less flat areas. Certain areas are sloped and very bouncy. Luckily, there is a big weak spot. There are two flat plates on the front of the hull. The flat plate on the right is the drivers port. Shoot that and you are able to kill the driver, gunner and loader in one go. This is a very efficient way to destroy this vehicle. With the F variant, you can use APCBC to instantly one-shot this vehicle. With the G variant, it is more reliable to use AP at ranges within 500 m to ensure penetration.

R3 T20 FA-HS:

This speedy wheeled vehicle can circle around you with ease and wipe out all your crew with its fast firing autocannon. In a close encounter, never expose your side to it, and do not even angle your hull. Face your hull directly to the R3, because on each side of the cast hull, above the inducer wheel there is a triangular area that blends and connects the upper front plate to the side. By angling the hull, this triangle becomes unangled to the R3, making it easily penetrated, and the driver / gunner will usually get knocked out first. It is harder for the R3 to penetrate your unangled hull thus giving you more time to react and destroy it.

Pros and cons

Pros:

• Familiar M4 Sherman game style
• Good 75 mm gun, with adequate damage and a decent rate of fire
• Excellent gun depression of -12° plus the angled frontal turret allows it to utilise hills very well
• Well angled frontal armour; when angling the hull it can deflect some low calibre / low-penetrating shells like the 75 mm M1, 76 mm F-34 / Zis-5
• Very fast turret traverse speed allows it to deal with multiple threats quite easily
• Adequate top speed allows it to get to positions in time, or to do tactical manoeuvres like flanking.
• Pintle-mounted HMG provides anti-aircraft defence
• Fitted with a vertical stabilizer, allowing more accurate fire on the move compared to other tanks, as well as better usage of shoot-n-scoot tactics

Cons:

• Armour is not as strong against up-gunned vehicles like the Panzer IV F2 and the T-34 mod.1942
• The best M61 shell struggles to penetrate heavy targets like Pz.Kpfw. Churchill and KV I C 756 (r)
• Trajectory is curved and velocity is low due to its short barrel, thus distant/moving targets are hard to shoot at
• 38.1 mm side armour is vulnerable to flankers like the Sd.kfz.234/2
• Narrow tracks offer poor ground flotation, thus poor off-road capabilities
• Prone to damage by artillery barrages, tracks can be hit and the fuel supply can be ignited
• Ammunition storage is vulnerable to cooking off
• May tip over when travelling across steep inclines

• The cast hull creates frontal weakspots with very little effective thickness, eg. the triangles between upper front plate and the side, and the curved hull hatches

History

Development

The Battle of France in 1940 proved to America that their current tank arsenal would not be able to withstand a German assault. The only tanks in their inventory at that time was the M2 Light Tanks and the M2 Medium Tank, both are inadequate against the German Panzer IIIs and the Panzer IVs. The US Army, in response, ordered for a tank armed with a 75 mm gun. While a 75 mm gun was available for use, a turret able to mount the gun was not. So while the turret and tank design underwent development, the 75 mm would be mounted on the stopgap design, the M3 Lee tank in a sponson mount. This interim design put the 75 mm on a lower and limited traverse mount that restricted its firing angle, but it did give the Allies a tank with the gun, so it was issued by the thousands until a better design could be made.

During the M3's development, the designs of the 75 mm armed vehicle were being drawn up and submitted by the Ordnance Department. Specifications on the tank design were strict, with restrictions made on the tank's height, width, and weight in order to make it able to be transported over bridges, roads, railroads, and on ships. These specifications would help the army by making the tank be very flexible on strategic, logistical, and tactical grounds. On April 1941, the Armored Force Board chose the simplest of the designs, which was a redesigned M3 hull and chassis with a turret mounting the 75 mm gun designated the T6, completed in September 1941. This tank would then designated the Medium Tank M4 in American service. The tank would become the most used Allied tank during World War II as it was lended out by the thousands in the Lend-Lease program to the Allied countries. The British called the M4 the "Sherman", which coined into the tank's name M4 Sherman that it would be known as in history. The production for the Shermans began on October 1941 and would continue to be produced until the end of the war in 1945 with around 50,000 units produced, making it the second most-produced tank in World War II before the T-34 tank.

Design

Many variants of the Shermans were produced, but they all followed a similar layout. The driver and bow gunner sat in the front driving compartment, the fighting compartment in the middle housed the turret its three crew member, and in the back was the engine compartment. The Sherman used many features present in previous American tank designs, the vertical volute suspension system (VVSS) and radial engine from the M2 Light Tanks, and the sloping armour of the M2 medium tanks. This became a contributing factor on the Sherman's reliability on the field, as most of the design flaws were ironed out with the previous tank designs. The tank mounted the 75 mm M3 gun, giving the tank very good AP and HE capabilities. The Sherman's turret traverse speed was very fast, able to traverse a full 360 degrees in only 15 seconds, which is considerably faster than the traverse speed on most German tanks. Another unique feature on the Sherman was the installation of a gyroscopic stabilizer on the gun and sight, making the Sherman one of the first produced tanks to incorporate those features. While the stabilization was only done for the vertical plane, it kept the gun stable enough to be able to shoot on the move effectively, with a study showing a 70 % hit probability on an enemy 300 to 1,200 yards away when moving at a speed of 15 mph. However, this feature was controversial among the crew and experiences with it vary.

The M4A1 Sherman model ran on a gasoline Continental R975C-1 radial engine and was one of the first models of the Sherman developed. The model in-game features the early M38 telecopic sight in the M4 periscope with no zoom, which was later replaced with a M55 telescopic sight in the gun mantlet by recommendation from the British. The tank's hull was fully cast, giving the tank a distinctive rounded slope front and sides. Though the rounded shape gave the frontal armour uneven angling, it provided adequate protection up to 100 mm in thickness in certain areas. Casting the hull took less man hours to perform, but suffered from the limited capability of most American factories and was hard to repair on the field. Thus, welding was prioritized as the primary manufacturing method in the other Sherman variants. Nevertheless, up to 6,281 M4A1s were produced from February 1942 to December 1943, out of the 49,234 Sherman units produced in the war.

French service

After the Fall of France, the Free French force served with the Allies. They soon relied on new modernising equipment from the United States Lend-Lease. From the period of 1943 to the end of the war, the United States supplied a total of 657 M4 Sherman tanks to the Free French, of which 383 were the M4A2 and 274 were the M4A4 Sherman tanks. These tanks, along with M3A3 and M5A1 Stuart light tanks helped formed the Free French armoured divisions (Division Blindée (DB)), which themselves were modeled after the American armoured divisions. The Free French armoured divisions would be committed to the Battle of Normandy in 1944, with the 2nd DB composted entirely of M4A2 while the 1st and 5th DB came with a mixed assortment of M4A2 and M4A4. Replacing lost or worn-down equipment in the Free French armoured divisions led to the issuement of vehicles from the US Army inventory, leading to the presence of the M4, M4A1, and M4A3 Sherman models in the divisions. They have also been seen using M4 Sherman models with different armaments, such as the 76 mm Gun M1 and the 105 mm howitzer.

Media

Skins

• Skins and camouflages for the M4A1 (France) from live.warthunder.com.

Videos

The Classic - French M4A1 Sherman - RB Gameplay - Virus

M4A1 (France) Tank Review - NUSensei

See also

Vehicles equipped with the same chassis

• M4 Sherman (Family)

Vehicles equipped with the same gun

• M8A1
• T14

External links

• [Wikipedia] M4 Sherman
• [Tanks Encyclopedia] Medium Tank M4 Sherman
• [The Shadock] French Shermans during WW2