Optics

What are optics and where to look for them

Optics are a device used by vehicle crews to increase the magnification of the enemy being targeted for a more reliable targeting solution. Typically used in specific modes, optics come into play whenever using the sniper scope (gunner position) or the commander's binoculars (from commander's cupola).

When operating the Gunner scope, objects are initially seen with the scope set to the minimum zoom setting. To toggle between the minimum and maximum zoom settings, this can be achieved utilising the scrolling mouse wheel, pressing the default "zoom in" key Z or through any other key mapped specifically for this function on a keyboard, mouse or joystick/throttle controller.

When looking at a vehicle in the vehicle garage of War Thunder, vehicles with optics will show their location when looking at the vehicle in X-ray mode. Using the cursor to hover over the optic a pop-up bubble will appear annotating the device as an "optic", some will even have additional information listed in the pop-up bubble. Generally, if the vehicle has more than one set of optics, only one of them will list the zoom levels options and typically this will appear when hovering over the gunner's optics, however, this is not always the case and all optics may have to be checked for more information.

Optics on AMX-30. Due to the vehicle modules, the optics may be difficult to find and will require rotating the vehicle for a better view.

Some vehicles do not contain as much information as others and when the optic pop-up bubble only lists one zoom level, it is assumed that this is the maximum zoom available for the optics on this vehicle as in the Ho-Ri Production Japanese tank destroyer.

Optic pop-up only states Zoom:6.0x which is expected to be the maximum zoom capability for this unit.

Several vehicles may not have a zoom range specified, when it comes to these, it is best to take the vehicle out on a training run and choose a fixed object in which to compare the zoom rate in comparison to other vehicles with known zoom rates. This will provide a general range in which to have a better idea of what the optics are capable of during combat manoeuvres.

Optics themselves can be pivotal in the ability to disable an enemy tank or it can also be an Achilles' heel, especially for super heavy tanks such as IS-7, in which the viewports where the optics are at providing a very weak point in the armour structure. Although they are extremely hard to target due to their extremely small size, nonetheless they can be hit.

Damage to the optics generally will not affect vehicle or crew gameplay at all, however, the optics will become unusable until they are repaired, which can affect certain vehicles (As example, Warrior cannot launch ATGM if commander's optics were destroyed).

Differences between various optics in game

Optics zoom levels are an important indicator as to what type of tank is being used. Typically brawler tanks meant to be used on the front lines will not have much zoom capabilities beyond X4 as they are meant for up-close fighting and not long range sniping. Tanks with zoom ranges of +X12 are meant for more reserve positions where they can maximize the zoom capabilities at disabling vehicles from a long distance. Those who are comfortable with the different vehicles and the optics located there can sometimes effectively push the limits of the optics and make the long-range shots with weaker optics or utilise a sniper-tank in close quarters battle.

An important note to remember in arcade mode is that it is easier to fine-tune gun aim with stronger magnification, especially if an enemy tank has only one small weak spot and you are limited on time. Also, the stronger the zoom is, the further apart the shell drop marks become making it slightly less confusing when estimating the shooting angle targeting solution.

Also worth noting, the optics of certain nations and/or vehicles may show vignetting or dark areas around the view area from a scope which limit the amount of area which can be viewed through the scope. As optics developed the vignetting lessened or virtually disappeared allowing for a larger viewing area.

Commander's binoculars always have about X6 zoom and same lenses across all vehicles.

Examples of zoom levels for different confirmed vehicles

The below screenshots were taken from the test drive map, always from a specific position on the edge between E-4 and D-4 (seen on the minimap) to allow for accurate comparison between vehicle optics being tested, especially with vehicles where the optic value is not known. The testing vehicle's hull front is always aligned towards the target to minimize a collision.

Weather settings for this test are at 16:00 and overcast. It surely would be easier to spot enemy at good weather, but when fighting in realistic battles tanks have camouflage and often begin engagements at the 2 km range. The potential of fog and other weather effects can make targets more difficult to see, therefore these testing purposes will use less than ideal circumstances to compare the different optics results.

In the screenshots the target is always located exactly 1 km to ensure a more accurate comparison. The enemy tank which spawns at the back of the practice map is always different depending on the vehicle chosen for test-drive, however, it is generally standing exactly 1.2 km away from testing spot.

When having problems coordinating the zoom level visually, utilising the compass at the top of the screen may help with the correlation - its size changes accordingly with the zoom level.

Click on an image and browse them with arrow keys/buttons on screenshot sides to make them easier to compare.

• 

  X1 - No zoom, 3PV in front of gun. View from a Ho-Ri Production.

• 

  X2.5 zoom. View from Tiger II (H) Sla.16 optics.

• 

  X3 zoom. Made with Calliope.

• 

  X3.5 zoom. Made with Object 120.

• 

  X4 zoom. Made with M46 “Tiger”. Notice the lack of vignetting compared to other images.

• 

  X5 zoom. Made with T20.

• 

  X6 zoom. Made with Binoculars (same for all vehicles).

• 

  X6 zoom. Made with Ho-Ri Production.

• 

  X6.8 zoom. Made with AMX-30.

• 

  X7 zoom. Made with Object 120.

• 

  X7.5 zoom. Made with AMX-13 (SS.11).

• 

  X8 zoom. Made with AMX-30.

• 

  X8 zoom. Made with T-55AM-1. Wider field of view compared to AMX-30.

• 

  X9.2 zoom. Made with Panzer IV/70(A).

• 

  X10 zoom. Made with Challenger tank line.

• 

  X10.3 zoom. Made with Leopard A1A1 (L/44). (Not to be mistaken with the "normal" Leopard A1A1).

• 

  X12 zoom. Made with Leopard A1A1 (L/44). (Not to be mistaken with the "normal" Leopard A1A1).

• 

  X13 zoom. Made with M901. Superior lenses quality for that magnification.

• 

  X16.1 zoom. Made with ST-A1. So far, the strongest optics a non-specialized in-game tank can have.

• 

  X40 zoom. Made with Stormer HVM, which is the only vehicle that uses it. So far, the strongest optics an in-game tank can have.

Work-around methods for improper zoom levels and scopes

Sometimes tanks have extremely powerful X16 zoom while utilizing demolition cannon with low velocity shells or extremely weak zoom (and very bad lenses at that) while utilizing high velocity APDS or APDSFS. It makes ballistic marks on scope way too cramped or spaced out for comfortable use and in case of early HEAT shells may make sniper scope unusable. Some, like rocket tanks, do not have ballistic marks at all and leave you all alone with your muscle memory.

Clearly, this isn't going to work, and we don't want to fire blindly.

There are some ways to work around these problems:

Zero-in the gun

To work around the problem, you can "zero in" the gun for a chosen shell to a certain distance, so that you can aim at targets directly. Also, some tanks like AMX-50 Foch have abysmal scope quality, but their rangefinder works faster than one of the others, making this method more viable than aiming yourself.

To activate this function, go to Controls->Tank->Miscellaneous->Sight distance control and enable "relative control", then assign buttons for "increase value" and "decrease value". Minimalistic settings look like this:

Minimal settings to set up the scope adjustment

Now, to pull gun up (to shoot further by default) use "increase value" and to pull gun back down use "decrease value" like on this screenshot:

It works!

Zeroing only considers your current shell for set distance. When you shift the shell to one with different velocity, it will be zeroed to a different distance. For example, if you set gun for HE to 450 meters, the APDSFS at these settings might get launched 2,100 meters away. Keep this in mind for APDS tanks or assign the reset button as well.

How to guess how far you need to "adjust" the gun?

In realistic mode, use "rangefinding" (key not assigned by default, can be found in Controls->Tank->Miscellaneous next to sight controls.) to find out the distance towards the hostile tank, or estimate it yourself, then set the gun to that number. Having an actual rangefinder modification and high "rangefinding" crew skill speeds the process up, increases the accuracy and maximum range of estimation.

Low velocity shell chemical shells (550 m/s and below) have a tendency to have double the falloff past 1,000 m range, in some cases they start falling off even at 800 m range, so even if you do zero-in the gun, the scope may still fail to tell you where the shell is going to actually land.

Try to not set gun adjustment sensitivity too high or too low, or you may end up needing to aim in reverse. Remember, since your gun aims at a distance you set yourself, if someone drives too close to you, you now have to aim below it:

In Arcade mode gunner always tells you the distance towards target you are pointing the crosshairs at and with no failure at that, which means you can just zero-in the scope to that exact number and your shell will almost always hit the mark, assuming you researched all the accuracy upgrades. Sometimes, it is much easier, than trying to make out the marks on your sight. For example, the APDSFS scope does not have a number for 1.6 km distance, only the big "mark" representing it, which may be confusing to some players.

This may seem unnecessary, but when enemy is behind a forest, a house and is very far away, it may actually save your tank.

User-made scopes

Sometimes the scope is just unsalvageable and is unusable for a normal person without days of practice. For example, rocket tanks have no ballistic marks on a scope whatsoever, and even though it is possible to "zero" the scope on it, it won't even say you the distance it is set to fire at, which makes any fine tuning impossible. This kind of problem needs radical fixing.

"How do we even aim with this?" is a very common question in the case of the Type 75 MLRS.

One option in War Thunder is the ability for users to create their own version of crosshairs found within the optics which may better fit with their gameplay style, streamline information presented or recreate a historically accurate representation. As such, default optics can be replaced with custom created systems. Each tank can be modified personally without affecting the rest.

The User-made optics quality heavily depends on the diligence of the creator. They share a common trait of being static (being unable to adjust to the changes of ammunition or the gun elevation) and often force the players to use manual gun adjustment at longer range, especially when utilising the default HEAT rounds, so use them at your own risk.

These changes do not affect zoom levels, gun characteristics or users abilities, they just change out the crosshair targeting application. However, even that much can make a huge difference to your life quality:

Rocket tank now has a scope and not only it kind of works, but the creator actually cared to add an ability to visibly zero-in the rockets, which makes it very easy to use for the player.

An example of scope being simply used simply for immersion reasons (Do note, that the status text on the scope is fake and does not really represent the real state of a tank.)

For more details about creation and use of custom scopes relate to this specialized article.

For use around Wiki

Several tanks do not have specified zoom levels listed, however, after being checked and compared to the gallery in a test-drive map, that information can be listed in the "main armament" section of the chosen vehicle, either by simply noting the minimum and maximum zoom levels or by filling it with a small table much like below:

{{PAGENAME}} Optics
Which ones	Default magnification	Maximum magnification
Main Gun optics	X8	X12
Comparable optics	XM-1 (GM)

In the case where magnification values are not known, values can be listed as "X8.3 (estimated)" and then a vehicle can be linked in the Comparable optics area which has optics of a known value which accurately compare to the unknown value optics being tested.

In the case if tank has Night Vision Devices it is far more reasonable to use expanded table such as this:

{{PAGENAME}} Optics
Type of optic	Magnification	Night Vision Devices
		Image Intensifier			Thermal Imager Resolution	Notes
		Resolution	Light Mult	Noise Level
Gunner's Sight	X3.6 - X12	1600 x 1200	9.0	High	500 x 300	Thermal imager unlocked by "NVD Upgrade" mod (tier 4), replaces image intensifier.
Commander's View	X6 / 3PV	1600 x 1200	9.0	High	Not Fitted	Image intensifier unlocked by "NVD" mod (tier 3)
Driver's View	X1	1600 x 1200	5.0	High	Not Fitted	Image intensifier unlocked by "NVD" mod (tier 3)

If you were comparing optics of a tank to the gallery and are unsure of your measurements, you can specify that below the table.

Every NVD can only be used from their designated areas: The gunner NVD can only be used from sniper view, the commander NVD can be used in third person view and binoculars view, the driver NVD can only be used in driver view, which is accessible by pressing a special key (not set by default).

Do note, that "commander view" for tanks represents both binoculars (X6) and third-person view (X1) and is same across all tanks as of patch 1.91.

Sometimes tanks are also fitted with Infrared spotlight. While it's not an optic device itself, it is only visible through night vision tools and can be used to find hostile tanks, thus it should be noted as well, since it's a supplementary tool. Information about it can be filled in small table as such:

{{PAGENAME}} IR Searchlight
Max Range	Beam Width	Location / Notes
1,400 m	8.2°	Searchlight mounted on turret front, just right of the gun. Light moves up and down with main gun.

To find out difference between night vision tools and their qualities refer to examples in specific article