Ho-Ni III

This page is about the Japanese tank destroyer Ho-Ni III. For the other vehicle of similar name, see Ho-Ni I.

Ho-Ni III

Ho-Ni I

Chi-Ha LG

Ho-Ni III

Ho-Ni I

Chi-Ha LG

Japan

II Rank

Battle rating:

AB	RB	SB
2.3	2.3	2.3

Class:

Tank destroyer

Research:4 600

Purchase:16 000

Show in game

Description

The Type 3 Ho-Ni III is a Rank II Japanese tank destroyer with a battle rating of 2.3 (AB/RB/SB). It was introduced along with the entire Japanese Ground Forces tree in Update 1.65 "Way of the Samurai". It handles and plays very similarly to the Ho-Ni I before it, but has been refined with the addition of more crew, a faster reload time, and most importantly, armour around the gun crew. However, it pays a slight cost of reduced top speed.

General info

Survivability and armour

Armourfront / side / back

Hull25 / 25 / 20

Turret25 / 25 / 25

Crew5 people

Visibility75 %

Having 25 mm of armour coverage around the entire gun crew, the Ho-Ni III no longer needs to fear artillery shrapnel or strafing runs from fighter aircraft. Do note however that it's still vulnerable to bombs, rockets and direct artillery hits! However, if the Ho-Ni III takes a hit, likely to survive with more operational crewmembers, as three of them must be knocked out before the vehicle becomes inoperable.

Another small armour increase is seen on the front of the tank, with the driver and radio station protected with another 10 mm of armour, though with this added strength, it still leaves an undesirable total width of a lacking 35 mm.

Armour type:

• Rolled homogeneous armour

Armour	Front	Sides	Rear	Roof
Hull	25 mm (12-31°) Front plate 17 mm (80-81°) Front glacis 15 mm (63°) Joint plate 15 mm (37-59°) Lower glacis	25 mm (40°) Top Left 20 mm (24-27°) Top Right 20 mm Bottom	17 mm (69°) Top 20 mm (4-58°) Bottom	12 mm
Superstructure	25 mm (15-16°) Front 25 mm (3-47°) Gun mantlet	25 mm (24-26°)	25 mm (10-11°)	10 mm

Notes:

• Suspension wheels and tracks are both 15 mm thick.
• Driver's port on the front plate is 10 mm thick.
• An extra 10 mm of armour is plated on top of the bow machine gun area, left from the driver's position.

Mobility

Speedforward / back

AB44 / 21 km/h

RB and SB40 / 19 km/h

Number of gears8 forward

2 back

Weight16.8 t

Engine power

AB324 hp

RB and SB170 hp

Power-to-weight ratio

AB19.3 hp/t

RB and SB10.1 hp/t

Game Mode	Max Speed (km/h)		Weight (tons)	Engine power (horsepower)		Power-to-weight ratio (hp/ton)
	Forward	Reverse		Stock	Upgraded	Stock	Upgraded
Arcade	44	21	16.8	241	324	14.35	19.29
Realistic	40	19		150	170	8.93	10.12

The only drawback of the Ho-Ni III compared to its previous version, is that the tank has a slight decrease in top speed. On flat grass, it reaches a top speed of 32 km/h, compared to the Ho-Ni I's top speed of 36 km/h.

Modifications and economy

Repair costBasic → Reference

AB600 → 742

RB660 → 816

SB801 → 990

Total cost of modifications8 390

9 380

Talisman cost640

Crew training4 500

Experts16 000

Aces160

Research Aces190 000

Reward for battleAB / RB / SB

40 / 60 / 70 %

118 / 118 / 118 %

Modifications

Mobility	Protection	Firepower
Tracks Research: 560 Cost: 630 80 Suspension Research: 470 Cost: 530 70 Brake System Research: 470 Cost: 530 70 Filters Research: 700 Cost: 790 100 Transmission Research: 910 Cost: 1 000 130 Engine Research: 910 Cost: 1 000 130	Improved Parts Research: 560 Cost: 630 80 Improved FPE Research: 470 Cost: 530 70 Crew Replenishment Research: 700 Cost: 790 100	Horizontal Drive Research: 560 Cost: 630 80 Adjustment of Fire Research: 470 Cost: 530 70 Elevation Mechanism Research: 700 Cost: 790 100 75mm_jp_Smoke_ammo_pack Research: 910 Cost: 1 000 130

Armaments

Main armament

75 mm Type 3 cannon

Ammunition46 rounds

Reloadbasic crew → aces

7.1 → 5.5 s

Vertical guidance-10° / 20°

Horizontal guidance-10° / 10°

The Ho-Ni III features a modernized Type 3 75 mm tank gun, based on the Type 90 75 mm field gun as on the previous Ho-Ni I, still being a great cannon, even with a slightly higher battle rating. With the addition of two dedicated loaders in a fully closed casemate, the gun also gets almost a second cut down on its reload time, making it capable of even more destruction.

75 mm Type 3					Turret rotation speed (°/s)					Reloading rate (seconds)
Mode	Capacity	Vertical	Horizontal	Stabilizer	Stock	Upgraded	Full	Expert	Aced	Stock	Full	Expert	Aced
Arcade	46	-10°/+20°	±10°	N/A	14.09	19.50	23.68	26.20	27.86	7.15	6.33	5.80	5.50
Realistic					9.52	11.20	13.60	15.04	16.00

Ammunition

Penetration statistics
Ammunition	Type of warhead	Penetration @ 0° Angle of Attack (mm)
		10 m	100 m	500 m	1,000 m	1,500 m	2,000 m
Type 1 APHE	APHE	103	101	92	82	73	65
Type 94 HE	HE	12	12	12	12	12	12

Shell details
Ammunition	Type of warhead	Velocity (m/s)	Projectile Mass (kg)	Fuse delay (m)	Fuse sensitivity (mm)	Explosive Mass (TNT equivalent) (g)	Ricochet
							0%	50%	100%
Type 1 APHE	APHE	668	6.56	1.3	15	84.8	47°	60°	65°
Type 94 HE	HE	522	6.02	0.1	0.1	810	79°	80°	81°

Smoke shell characteristics
Ammunition	Velocity (m/s)	Projectile Mass (kg)	Screen radius (m)	Screen deploy time (s)	Screen hold time (s)	Explosive Mass (TNT equivalent) (g)
Type 90 Smoke	570	5.72	13	5	20	100

Ammo racks

Ammo racks of the Ho-Ni III

Full ammo	1st rack empty	2nd rack empty	3rd rack empty	4th rack empty	5th rack empty	Visual discrepancy
46	44 (+2)	40 (+6)	36 (+10)	23 (+13)	0 (+46)	No

Notes:

• Racks disappear after you've fired all shells in the rack.
• Turret flanks empty: 36 (+10) shells

Usage in battles

The Ho-Ni III plays very similar to the Ho-Ni I with the added benefit of two extra crew which cuts down on the reload time for the 75 mm gun.

The starting Japanese player will also be quite accustomed to the handling of the hull, as it still is based on the Chi-Ha. But due to the added weight of the fully enclosed casemate, it is slower compared to its brother Chi-Ha.

With the added benefit of the casemate and crew, the Ho-Ni III sports better survivability, though, most shells will not knock you out in one shot due to having a total of five crew members. The crew isn't out in the open anymore and has sufficient armour from machine-gun fire from both ground & air enemies. Knowing this, you can stand to take more chances of sitting in one location and not have to worry about aircraft making a single pass and taking the vehicle out.

Pros and cons

Pros:

• Effective 75 mm gun with APHE can penetrate all enemies at its rank
• Effective -10° gun depression
• Fully enclosed crew compartment provides better protection from strafing aircraft
• Five man crew, three can be knocked out and the tank will still operate
• Good gun traverse speed
• Mobility is decent due to being built on a Chi-Ha chassis
• Can utilise smoke shells

Cons:

• Thin armour; close-quarters fighting is not advised
• Four men are densely packed in the casemate
• No coaxial machine gun to use against aircraft or GAZ trucks
• Top speed is less compared to the Chi-Ha due to the added weight of the casemate

History

The Type 3 Ho-Ni III is a self-propelled anti-tank artillery gun. The Ho-Ni III was the third of the Japanese 'tank destroyers', which Japan developed based on inspiration from the German tanks of this class. This SPG was very similar to the previous models of this series, the Ho-Ni I and Ho-Ni II, but surpassed them in multiple ways, embodying all the very best of each of them. The chassis of the medium Type 97 Chi-Ha Kai tank was used as a base, while the Ho-Ni I and II used a simple, unmodernized version of the Type 97 Chi-Ha. The powerful 75 mm Type 90 field cannon was chosen as a gun. In its design, this was a counterpart of the French 85 mm Schneider cannon (85 mle 1927 Schneider). After a small redesign for installation on the tank, this gun was designated the Type 3. The cannon was installed in an armored non-rotating superstructure which, in contrast to the Ho-Ni I and Ho-Ni II, was fully enclosed on all sides and provided optimal protection for the crew. Additional ammo took the place of the machine gun in the hull, and the SPG's crew was reduced to four (in comparison to the five of the previous vehicles in this series).

Ho-Ni series SPGs went into production in 1942, and the order to design and produce the upgraded Ho-Ni III was received by the Hitachi firm in the beginning of 1944. Due to a shortage of resources and constant bombings, the Japanese industry was only able to produce roughly 35 Ho-Ni III SPGs before the end of the war. Most of them were distributed among divisions tasked with defending Japan itself, while only a few were sent to areas of active military operations such as Okinawa and the Philippines. No records survive of military clashes between the Ho-Ni III and American tanks.

- From Devblog

Media

Skins

• Skins and camouflages for the Ho-Ni III from live.warthunder.com.

Videos

Type 3 Ho-Ni III Tank Review - NUSensei

See also

Links to the articles on the War Thunder Wiki that you think will be useful for the reader, for example:

• reference to the series of the vehicles;
• links to approximate analogues of other nations and research trees.

External links

• [Devblog] Type 3 Ho-Ni III: The Japanese Marder
• [Wikipedia] Type 3 Ho-Ni III

Japan tank destroyers
Ro-Go Derivatives	Ro-Go Exp.
Chi-Ha Derivatives	Ho-Ni I · Ho-Ni III · Ho-Ro · Chi-Ha LG
Ho-Ri	Ho-Ri Prototype · Ho-Ri Production
Other	Na-To
JGSDF
SPRG	Type 60 (C)
SPH	Type 75 · Type 99
ATGM	Type 60 ATM
Rocket	Type 75 MLRS
USA	▅M36