Vickers Mk.7

This page is about the British medium tank Vickers Mk.7. For other versions, see Vickers MBT (Family).

Vickers Mk.7

VFM5

Vickers Mk.7

VFM5

Britain

VII Rank

Battle rating:

AB	RB	SB
10.7	10.7	10.7

Class:

Medium tank

Research:300 000

Purchase:830 000

Show in game

Description

The Vickers Mk.7 is a rank VII British medium tank with a battle rating of 10.7 (AB/RB/SB). It was introduced in Update 1.93 "Shark Attack".

The Vickers Mk.7 is a prototype tank design by Vickers during the 1980s. The tank featured a capable fire control system, an effective and tested L11 120 mm gun, similar to those on the Chieftains and as a novelty for the British tech tree, the turret is mounted on the chassis of a Leopard 2.

This very raw input in mobility from the Leopard's engine, matched with the sturdy Chobham armour inside the Vickers turret, grants the veteran tankers of the British tree a fairly unique and dynamic balance of mobility, firepower and armour for a variety of playstyle options.

The tank is not only well balanced in the 3 main categories, but is also armed with improved TOGS, laser rangefinders and various smoke discharging equipment; turning this MBT into a dangerous opponent to meet on the battlefield.

General info

Survivability and armour

Composite armour

Balanced protection against all types of ammunition

Smoke grenades

Creation of a smoke screen in front of the vehicle

Armourfront / side / back

Hull80 / 35 / 20

Turret55 / 55 / 20

Crew4 people

Visibility95 %

Armour	Front (Slope angle)	Sides	Rear	Roof
Hull	35 mm (53-82°) Upper glacis 40 mm (51°) Lower glacis 30 mm (82°) Driver's hatch	10 mm + 10 mm (5°) Top - Front 20 mm + 10 mm (5°) Top - Rear 35 mm Bottom - Front 20 mm Bottom - Centre & rear 5 mm Side Skirts 20 mm (39°) Bottom - Belly	20 mm (12°) Upper plate 20 mm (17°) Centre plate 20 mm (50°) Lower glacis	30-35 mm (8°) Front 20 mm (0-8°) Centre and rear 5 mm Radiator vents
Turret	20 mm (3-53°) Turret front 30-35 mm (54-75°) Gun mantlet	20mm (6°) Turret side	20 mm (0°) Turret rear	40 mm (0-12°) 20 mm Loader hatch
Cupola	20 mm (cylindrical)			20+20 mm Outer ring 20 mm Dome

Notes:

• Suspension wheels, tracks and torsion bars are 20 mm thick.
• A 20 mm plate reinforces the hull sides' top area.
• A 8 mm plate separates the crew compartment from the engine compartment.
• Additionally to the outer armour, composite armour is present:

Composite armour	Front	Sides
Hull	Front glacis 90 - 350 mm Kinetic 243 - 600 mm Chemical	N/A
Turret	Turret cheeks 350 - 500 mm Kinetic 350 - 650 mm Chemical Gun mantlet (Centre) 250 - 300 mm Kinetic 300 - 600 mm Chemical	Side armour 150 mm Kinetic 315 mm Chemical

Mobility

Speedforward / back

AB81 / 37 km/h

RB and SB73 / 33 km/h

Number of gears8 forward

4 back

Weight54.6 t

Engine power

AB2 862 hp

RB and SB1 500 hp

Power-to-weight ratio

AB52.4 hp/t

RB and SB27.5 hp/t

Game Mode	Max Speed (km/h)		Weight (tons)	Engine power (horsepower)		Power-to-weight ratio (hp/ton)
	Forward	Reverse		Stock	Upgraded	Stock	Upgraded
Arcade	81	37	54.6	2,032	2,862	37.22	52.42
Realistic	73	33		1,327	1,500	24.3	27.47

Modifications and economy

Repair costBasic → Reference

AB4 561 → 6 786

RB4 415 → 6 569

SB5 165 → 7 685

Total cost of modifications243 000

409 000

Talisman cost2 900

Crew training240 000

Experts830 000

Aces2 100

Research Aces1 140 000

Reward for battleAB / RB / SB

150 / 200 / 250 %

238 / 238 / 238 %

Modifications

Mobility	Protection	Firepower
Tracks Research: 18 000 Cost: 28 000 460 Suspension Research: 12 000 Cost: 19 000 310 Brake System Research: 12 000 Cost: 19 000 310 Filters Research: 13 000 Cost: 20 000 330 Transmission Research: 17 000 Cost: 26 000 440 Engine Research: 17 000 Cost: 26 000 440	Improved Parts Research: 5 400 Cost: 28 000 460 Improved FPE Research: 3 600 Cost: 19 000 310 Crew Replenishment Research: 13 000 Cost: 20 000 330	Horizontal Drive Research: 18 000 Cost: 28 000 460 Adjustment of Fire Research: 12 000 Cost: 19 000 310 NVD Research: 12 000 Cost: 19 000 310 Elevation Mechanism Research: 13 000 Cost: 20 000 330 120mm_britain_Smoke_ammo_pack Research: 13 000 Cost: 20 000 330 Smoke grenade Research: 13 000 Cost: 20 000 330 Artillery Support Research: 17 000 Cost: 26 000 440 120mm_britain_L23A1_APDSFS_ammo_pack Research: 17 000 Cost: 26 000 440 Laser rangefinder Research: 17 000 Cost: 26 000 440

Armaments

Laser rangefinder

Reduces the error and increases the maximum measurable distance of the rangefinder

Night vision device

Improves visibility by enhancing natural light or active illumination.

Thermal imager

Allows to see thermal radiation in the infrared range day and night

Main armament

120 mm L11A5 cannon

Two-plane stabilizer

Reduces the swing of the gun in two planes while moving

Ammunition50 rounds

First-order3 rounds

Reloadbasic crew → aces

7.8 → 6.0 s

Vertical guidance-10° / 20°

The Mk.7 uses the same 120 mm L11A5 rifled gun as the Challenger Mk.3. Shell loadout is identical and works well for mid-Cold War era tanks such as the Type 90, Leopard 2A4, T-64B/T-72A/T-80B, etc., but may struggle when fighting more modern vehicles such as the Leopard 2A5, T-80U, Leclerc, etc.

120 mm L11A5					Turret rotation speed (°/s)					Reloading rate (seconds)
Mode	Capacity	Vertical	Horizontal	Stabilizer	Stock	Upgraded	Full	Expert	Aced	Stock	Full	Expert	Aced
Arcade	50	-10°/+20°	±180°	Two-plane	34.3	47.4	57.6	63.7	67.8	7.80	6.90	6.36	6.00
Realistic					21.4	25.2	30.6	33.8	36.0

Ammunition

Penetration statistics
Ammunition	Type of warhead	Penetration @ 0° Angle of Attack (mm)
		10 m	100 m	500 m	1,000 m	1,500 m	2,000 m
Shot L23A1	APFSDS	396	394	387	376	367	357
Shell L31A7	HESH	152	152	152	152	152	152
L26	APFSDS	471	469	464	458	450	444

Shell details
Ammunition	Type of warhead	Velocity (m/s)	Projectile mass (kg)	Fuse delay (m)	Fuse sensitivity (mm)	Explosive mass (TNT equivalent) (g)	Ricochet
							0%	50%	100%
Shot L23A1	APFSDS	1,535	3.89	N/A	N/A	N/A	78°	80°	81°
Shell L31A7	HESH	670	17.34	0.1	4	6,530	73°	77°	80°
L26	APFSDS	1,550	4.3	N/A	N/A	N/A	78°	80°	81°

Smoke shell characteristics
Ammunition	Velocity (m/s)	Projectile mass (kg)	Screen radius (m)	Screen deploy time (s)	Screen hold time (s)	Explosive mass (TNT equivalent) (g)
L34	670	17.1	20	5	25	50

Ammo racks

Ammo racks of the Vickers Mk.7

Full ammo	Ammo type	1st rack empty	2nd rack empty	3rd rack empty	4th rack empty	5th rack empty	6th rack empty	Visual discrepancy
50	Projectiles Propellants	18 (+32) 18 (+32)	12 (+38) 15 (+35)	12 (+40) 10 (+40)	3 (+47) 3 (+47)	1 (+49) 1 (+49)	N/A N/A	No

Notes:

• First stage ammo racks (ready racks) are denoted with *.
• In the case of projectiles racks 4 and 5*. The rack is shared but the outer half of the ammunition is used as the ready rack and the inner half is stored ammo and thus considered as rack 4 for the purposes of determining load order.

Machine guns

7.62 mm L8A2 machine gun (coaxial)

Ammunition2 000 rounds

Belt capacity200 rounds

Reloadbasic crew → aces

10.4 → 8.0 s

Fire rate1 001 shots/min

7.62 mm L8A2
Mount	Capacity (Belt)	Fire rate	Vertical	Horizontal
Coaxial	2,000 (200)	600	N/A	N/A

Usage in battles

The Vickers Mk.7 is a main battle tank, and thus a tank that should be on the frontlines being the first line of attack. It is considered one of the best armoured MBTs at its battle rating. This is due to its composition; a Leopard 2A4 hull which offers protection against all CE threats except 9M133 Kornet and is able to stop APFSDS rounds with <400 mm penetration, and a custom British turret similar to the Challenger 2 which offers protection against all CE threats except 9M133 Kornet and APFSDS rounds with <405 mm penetration. Thanks to this, the Vickers Mk.7 can be used in a variety of engagements at both short and long ranges with high chances of survivability.

In urban combat:

Close quarters combat is one of the most risky engagements in the game, but thanks to the superb armour of the Vickers Mk.7, it is able to have multiple engagement modes when in CQC.

Battering Ram:

Vickers Mk.7 can be used as the tank who will push through the enemy line due to its armour. Be aware of how the chassis is poked between corners as the hull is only armoured in the frontal plate. Any shot fired at the track's sprocket can be fatal as there is no armour to stop the incoming shell. When fighting in an uptier, avoid being the battering ram as all 10.3-10.7 vehicles can punch through any part of the frontal armour (including turret) and destroy the tank in a couple of shots. Be aware of facing enemy tanks like the Leopard 2A6 and Leclerc S2 which have extremely powerful APFSDS rounds that will go through the Vickers Mk.7's armour like hot knife through butter. When in a downtier, you are able to be the battering ram as only a couple vehicles at the battle rating will be able to pierce through your armour (tanks like the Type 16, T-62M-1 and Type 74 will be able to punch through your armour between 8.7 and 9.7, be aware as they penetrate between 405 mm and 450 mm of armour with APFSDS). Try to stick with people behind you so friendlies can assist you if needed, sometimes who can pull you with a winch could save both's life.

Bastion defence:

Due to the high survivability, the Vickers Mk.7 is able to hold defensive positions (cap points, strategic locations, etc) quite well, as well as repelling and counter-attacking any aggressor with ease. Due to its powerful engine and transmission, it is able to move forward, fire, and move backwards in quick succession.

*Note: the Vickers Mk.7 most prominent weak spot in the turret is the mantlet, always be on the lookout to hide it as much as possible or by wobbling your turret a little so enemies have a smaller chance to hit the mantlet.

In rural combat:

Due to the longer ranges compared to the urban combat, the Vickers Mk.7 is able to use multiple techniques and combat roles to fulfil the player's preference.

Sniper:

Thanks to the high velocity stock ammunition, the Vickers Mk.7 is able play as a sniper in long range maps. This, with the addition of the laser rangefinder and thermal imaging sights, makes the Vickers Mk.7 a fearful sniper as only certain tanks will be able to pierce your turret past 500 m. Be aware as, despite having a strong hull, always try to get in hulldown position in order to hide the frontal weakspots of your tank (lower frontal plate, turret ring). At longer ranges, enemies will take more time in order to hit and damage the Vickers Mk.7 if hulldown.

Flanking:

As much as crazy it sounds, the Vickers Mk.7 has an impressive speed of 75 km/h even with all the armour. Thanks to this, the Vickers Mk.7 is able to move around and push behind enemy lines and retreat or move to wherever is needed. Thanks to the stabilizer, it is able to fire on the move if needed for a quick "Hit 'n' Run" tactic. It has a slow reload rate (7.8 seconds stock) which can cause issues when engaging targets in a fast manner. Use smoke if needed to retreat and relocate.

Pros and cons

Pros:

• Accurate main gun with HESH and smoke as support rounds
• Excellent mobility in all directions, also effective off-road mobility
• Respectable turret armour compared to some tanks at the battle rating; fearful when in downtier
• Decent stock APFSDS shell (394 mm at 100 m at 0°)
• Powerful gun optics (4.0x - 12.0x FOV: 18-6), gun depression, TOGS and laser range finder: excellent tank hunting capabilities
• Two-piece ammunition is stored separately; reduced risk of detonation

Cons:

• Large and tall profile; difficult to conceal from tanks, aircraft or helicopters
• Difficulties when fighting sloped armour at long distances, chiefly Soviet T-72 (Family) or Leopard 2A6
• Ammo rack behind the turret with no blowout panels
• Armour protection nearly useless against high velocity FIN-shells (e.g., DM13, 3BM42, DYW1)
• Weak spots in hull and turret: gun mantlet, driver position and armourless sides and weak LFP inherent from Leopard 2 (Family)

History

After quite a few private tank ventures, and the unsatisfactory development of the Vickers Mark 4, also known as Valiant. The Vickers company brought another design aimed to develop a capable MBT. Either as a replacement for the Challenger Mk.1 then currently in service, or as a valuable modern tank for the exportation. With the support of the Krauss-Maffei company, Vickers matched the up-rated turret of the previous Mark 4 Valiant MBT, with an identical Leopard 2A4 chassis. Thus creating in June 1985, what it became known as Vickers MBT Mark 7.

The Leopards' MTU 838 engine capabilities were well known, and the match with the improved Valiant's Mk 4 turret protected by the powerful Chobham Armour, resulted in an acceptable weight of over 54 tons, providing a top speed of 72 km/h. A speed which was unlikely from most British MBTs of the time - Specially from previous MBTs as the already out phased Chieftains.

Vickers' prototype got fitted with the L11 120 mm gun, the same gun as the contemporary Challenger 1. After these modifications, the Mark 7 went under trials in Egypt, September of the same year. In 1986, using some technologies of the defunct MBT-80 project, the Mark 7 received even greater upgrades: 2nd generation thermal sights with increased resolution, improved stabilization systems for the main gun, reduced thermal and electromagnetic signatures and a new telescopic laser sight. Effectively reworking on the IFCS (Improved Fire Control System) for the 120 mm L11A5 cannon. Equally formidable, the Leopard 2 chassis matched perfectly this gunnery refits; turning the Mark 7 in a very steady tank while firing on the move.

Bittersweet experiences on the CAT 87 (Canadian Army Trophy) with the Army's Challengers 1 pitted against Leopards 2/1 and M1 Abrams, made some interest on the Vickers Mk.7 project. Therefore, in October 1987, a comparison test on the Lulworth Gunnery Ranges was performed between a Challenger 1 and a Vickers Mark 7. CHIP (Challenger/Chieftain Improvement Programme) was looking for projects and new technologies to integrate into the serving Challengers 1. At the firing range, Challenger 1 hit seven out of the 8 targets in an engagement time of approximately 21.7 seconds. While the Vickers Mark 7 achieved successful hits to all 8 targets in only 12.5 seconds. This is likely due to old Chieftain's cannon and gunnery systems being fitted into the newer Challenger 1, with only slightly major gunnery improvements aside from TOGS - unlike the modernized Vickers Universal turret.

This universal turret also made possible not only the installation of an IFCS but the modification for different gun mounts such as the Royal Ordnance's L7 105mm gun. The turret was made in this universal configuration since it was hoped this would suit any potential exportation customers needs, or at least, grow in interest for the British Army. While the army did recount experience in the Vickers Mk 7 and the technologies improvement on gunnery and target requisitioning, in the end, they not procured any contract for it. All the technology research and tests made between the Challenger 1 and the Mk.7 instead lead Vickers and the MOD to develop what was to be known as; the Challenger 2.

Without the interest of the British Army, high productions costs, international political situations and the dependency on a German-made hull, the Vickers Mk.7 did not succeed on the exportation market. Any further research was then halted and the project cancelled, with a single prototype built.

While the fate might seem short-lived, the Vickers Mk.7 proved to be an invaluable leap forward in the modernized MBT development. Not only regarding the CR2 but also because in 1986 the Universal Vickers turret was reproduced to be used by Engesa, on the Brazilian EE-T1 Osório Main Battle Tank

Media

Skins

• Skins and camouflages for the Vickers Mk.7 from live.warthunder.com.

Videos

The Shooting Range #175 - Metal Beasts section at 00:38 discusses the Vickers Mk.7.

See also

Related development

• Leopard 2A4

External links

• [Devblog] Vickers Mk.7: The Steel Centaur

Vickers-Armstrongs Limited
Ships
Tribal-class	HMS Eskimo · HMCS Haida
Invincible-class	HMS Invincible*
Kongō-class	IJN Kongo**
Tanks
Light Tanks	VFM5*** · Vickers Mk.11***
Light Tank Mk VI	Light AA Mk I
Light Tank Mk VII	Tetrarch I
Light Tank Mk VIII	Alecto I
Tank, Infantry, Valentine	Valentine I · Valentine IX · Valentine XI · Archer
Vickers MBT	Vickers Mk.1 · Vickers Mk.3 · Vickers Mk.7***
Heavy Tanks	Independent****
Export	▂МК-IX "Valentine" · Vickers Mk.E****
See also	Vickers-Armstrongs Aircraft Limited
	*Previously Armstrong Whitworth
	**Built for Japan
	***Vickers Defence Systems
	****Previously Vickers Limited