Difference between revisions of "World War: For Commanders"

From War Thunder Wiki
Jump to: navigation, search
m
Line 1: Line 1:
{{DISPLAYTITLE:World War}}
 
 
 
[[File:WW Operation selection screen.jpg|350px|thumb|Right|Operation selection screen]]
 
[[File:WW Operation selection screen.jpg|350px|thumb|Right|Operation selection screen]]
 
'''World War''' - a game mode involving battles on a global map. Conflict will occur in the format of "operations", which include dozens of individual battles.
 
'''World War''' - a game mode involving battles on a global map. Conflict will occur in the format of "operations", which include dozens of individual battles.
Line 225: Line 223:
 
Since each mission follows a confrontation between aircraft already in flight, another defining feature of World War missions is the absence of airfields. Instead, there are safe exit zones on the maps. If a player abandons an aircraft in a safe exit zone, the aircraft is recorded as a survivor and will not be deducted from the army, but it will no longer be available for use in this battle.
 
Since each mission follows a confrontation between aircraft already in flight, another defining feature of World War missions is the absence of airfields. Instead, there are safe exit zones on the maps. If a player abandons an aircraft in a safe exit zone, the aircraft is recorded as a survivor and will not be deducted from the army, but it will no longer be available for use in this battle.
  
[[Category:Game_mechanics]]
+
[[Category:World War]]

Revision as of 10:03, 12 September 2018

Operation selection screen

World War - a game mode involving battles on a global map. Conflict will occur in the format of "operations", which include dozens of individual battles.

The game mode differs significantly for the commander, officers and ordinary members of a squadron. Commanders and officers are able to choose which operations their squadrons will participate in, move forces in real time on the operational map and initiate battles.

In the World War game, RB game mode will be used with the marker mechanics of the AB.

Operation

Every squadron can participate in “World War” by selecting an operation on the global map. The commander chooses an operation and selects one of the two sides in the conflict. In participating in a single operation, a squadron can not change sides.

The world war operation screen is divided into two main sections: the operation screen where all in-game actions take place, and the information panel which displays additional details about objects on the operational map, operation objectives and the events log.

Operational command (moving the armies on the map) is available for commanders and the officers in each squadron. Privates can only choose and join battles.

Operational map

Armies

Armies are combat units on the operational map. Armies are colour-coded: the opponent’s armies are red, allied armies are blue, and your armies are green.

Icons indicate the army type: armour, aircraft, infantry or artillery. Armies can capture territory and participate in battles. Each army consists of a specific number of vehicles, the loss of which means the loss of the army. Read more details about the features of different armies and how to control them on the Armies page.

WW Infantry logo.png
WW Tank logo.png
WW Artillery logo.png
WW Plane logo.png
WW Entrenched logo.png
Infantry Tank Artillery Aviation Entrenched (Only tank and infantry)
Army mostly consists of infantry units Army mostly consists of armoured vehicles Long-range artillery supported by playable AA vehicles Aircraft of any type Unique ability available for some types of armies. Entrenched army receives less damage from shelling and defense bonuses when being attacked by an enemy (the mission type for the entrenched armies is always “Defense”)

Airfields

Airfields serve as a base of operations for air forces. The airfield icon displays the number of available aircraft for your army group.

When you select an airfield, you can see detailed information about it and order aircraft to take off.

Sectors

The operational map is divided into sectors that define control of the territory and the front line. Each sector can be neutral or belong to one of the sides.

There are also special sectors:

  • Reinforcement sectors - a special sector, usually indicated by a shade of the colour of either of the opposing sides. It provides a corridor to “the rear”. The deployment of reinforcements is only available in these sectors. In addition, supplies for troops from the rear is carried out via reinforcement sectors and therefore it is important that these sectors are not over run by the enemy and if they are then a player will have limited time to re-capture them again before losing all his forces
  • Key sector has a brightly coloured border denoting who currently holds it. Often control over these sectors means victory for the attacking side and the more the key sectors owned then the faster reinforcements will arrive.
  • Sectors must be controlled in order to complete mission objectives.

Capturing sectors

To capture sectors, several conditions must be met:

  • The sector must not contain the ground armies of the side that previously controlled the sector.
  • The sector must contain at least one ground army of the capturing side or the sector must be cut off from the rear (surrounded on all sides by sectors of the attacking side).

When these conditions are met, the other side gets control of the sector. Also, a sector that is cut off from the rear (surrounded on all sides by the opponent’s sectors) and contains no ground armies of the defender, is considered captured and automatically changes its side.

Types of terrain

In addition to the tactical control of the armies it is also necessary to take into account the type of terrain over which the army will move. Different parts of the operational map have different types of terrain. The type of terrain affects both the speed of ground forces and the type of missions created for ground battles in this map section.

  • Road = unit speed x1.4
  • City = unit speed x1.2
  • Village = unit speed x1.2
  • Off-road = unit speed x1.0
  • Snow = unit speed x0.9
  • Sand = unit speed x0.9
  • Forest = unit speed x0.7
  • Fortifications = unit speed x0.7
  • River = unit speed x0.33
  • Ocean – impassable for ground forces
  • Mountains – impassable for ground forces

Control Panel

In addition to the movement of troops it is necessary to monitor their status and any statistics of all controlled armies as well as the readiness of reinforcements, the morale of the armies and many other indicators that are important for victory. For these purposes each commander has a control panel.

Operation objectives

In each operation, both sides of the conflict have a list of objectives. Completing any of the main operation objectives leads to victory.

  • By clicking on the “List of objectives” button, you can see the full list of tasks, as well as detailed descriptions of them.
  • If you need to capture specific sectors to complete an objective, you can view these sectors on the operational map by hovering the mouse over the list of sectors in the objectives list.

Operational log

In the operational log, you can see the complete list of events from the beginning of the operation.

  • Log filters allow you to display only relevant types of messages on screen.
  • The operation log has interactive features:
    • You can hover the cursor over a sector to highlight it on the operational map.
    • You can select an army directly in the log, if it is still present on the operational map.
    • You can go to the battle screen if a battle is still in progress, or view the results if it has already ended.

Combat

WW Commanders logo.png
WW Reinforcements logo.png
WW Airfields logo.png
WW Army logo.png
Commanders Reinforcements Airfields Army
  • Commanders - In this tab, you can see the list of squadrons in this operation.
  • Reinforcements - In this tab, you can view all of your reinforcements divided into two lists: ready and not ready for deployment. Armies from the first list can be deployed by selecting the relevant army and right clicking anywhere in the reinforcement sector. For armies that are not ready, the time remaining until reinforcements arrive is shown.
  • Airfields - The “Airfields” tab contains complete information on the state of armies at all airfields. After selecting an airfield from the list, you can view the list of aircraft ready for takeoff, as well as the list of armies that have recently returned to the airfield and are currently preparing for a repeat flight.
  • Armies - All armies under your control are listed here, divided into groups according to their current status.

Armies

Armies are combat units on the operational map. Click the left mouse button on an army to select it and give it orders or view additional information about it. To create a complex route, you can hold the “Shift” key and create a route by clicking the left mouse button. The order to stop or cancel the current action is "S".


Army panel

The army panel contains all the information about the army.

  • The army's status is indicated by an icon. Possible statuses are: Idle, On the Move, In Battle, Entrenched, or Entrenching (with end timer).
  • The army's main vehicle type and quantity. If the army does not have enough vehicles, it is considered eliminated and disappears from the operational map.
  • Morale – (will depend on the results of any battles; an army that loses all remaining moral after a battle will surrender to the enemy)
  • List of vehicles – a complete list of the army’s vehicles, where you can see the quantity and ammunition (for aviation armies).

Army movement

The army is controlled by the following keys:

  • Right mouse button (RMB) orders to move to the specified sector
  • Shift + LMB allows you to create a route with several points or add points to an existing one.
  • S – stop. It stops the army and can also function as a cancellation of the current action, such as entrenchment or an artillery salvo.

Confrontation

A confrontation between two opposing armies leads to a battle (not always true for confrontations between ground and aircraft armies.

'Tip: The precise battle location is determined by the state of the armies when the battle starts. For example, a battle between two armies will be created when they meet each other, one of the armies is stationary at the time, this is interpreted as one army attacking the other, so the battle will be created at the point where the second army is defending.'

In a confrontation, armies are moved to the battle point and lose the ability to move until the battle is over.

Ground forces cannot move through an ongoing battle. If an army attempts to do this, it will be pushed back and stopped.

Tip: To see whether an army will be able to pass between two battles, use Shift + LMB – the width of the path will always correspond to the radius of the army to which the path belongs

Mechanics

Entrenchment

Armour and infantry armies have the ability to entrench themselves. An entrenched army receives significantly less damage from an artillery strike and fighting such an army will create Defence missions, where the defenders will have all the advantages.

Entrenchment takes time. After you give the order, you can see when the army will be entrenched in the army description.

Retreat

A defeated army that has not been destroyed according to the battle results retreats in the opposite direction, away from the opponent, losing its previously held position and its “Entrenched” status, if it had it. Retreating aircraft armies stop responding to orders and return to the airfield.

Morale

Indicates the army’s morale level. Morale rises with every victory and falls with every defeat. An army with zero morale surrenders to the enemy based on the battle results and disappears from the operational map.

Encirclement

Ground forces located in a sector without a link to the rear are considered encircled. Such armies begin to lose supplies and will be destroyed after a certain period.

Encirclement is a very effective tactic! It is much easier to clear an army from the operation not by fighting but by using skillful tactical choices by the commander.

Army destruction

If there are not enough troops left in an army, it is considered destroyed and disappears from the operational map.

Aircraft army features

Departing the airfield

To create an aircraft army, you must select an airfield and specify a point of movement (right click), as with any other army. This will open the aircraft army creation window, where you must specify the aircraft and quantities for the army and choose the armament presets for each vehicle. You can only depart from the airfield within limitations: there are minimum and maximum army sizes.

Armament

Each aircraft that flies out of the airfield receives armament. In battle, you can only use the selected preset. If, according to the battle results, the aircraft was left without bombs, rockets or torpedoes, then in the next battle this aircraft can be used without these munitions. Reloading such munitions can only take place at the airfield.

Fuel

Aircraft armies can spend a limited amount of time in the air, and the flight time for each aircraft depends on the maximum possible fuel load for each aircraft. The flight range of an air army will be calculated based on the minimum flight range value from all the aircraft. When the time runs out, the aircraft army returns to the base. During a battle, the fuel load for the aircraft will be calculated based on the remaining flight time.

Confrontation with enemy air armies

Only an air army can intercept another air army, so any encounter between an air army and a ground army does not trigger the start of a battle. However, when an air army stops, it will attack any ground army located below it.

Tip: The air army will remember a target if you specify the enemy’s army as the end point of the flight path. The air army will not pursue this target, but if it stops above several enemy armies, one of which has been stored as a target, then the attack will be carried out on this target.

Artillery army features

Artillery strike

The ability to launch an artillery strike on an area. All armies, including allied armies, located inside the strike radius lose their vehicles. Losses are determined by the percentage of the army located inside the strike radius, as well as whether the army is entrenched or not.

The strike itself takes place in several stages. First is the guidance stage, followed by a series of volleys. Artillery can fire up to three volleys at a time, if there are enough shells. Shells for artillery strikes are supplied one at a time at regular intervals.Reinforcement does not occur if an artillery army has lost contact with the rear.

Battles

Artillery armies cannot be entrenched, while battles with aircraft always take place in Defense mode. Battles with ground forces are automatic and always lead to the destruction of the artillery army.

Battles

A battle is a confrontation between several armies. With rare exceptions, a battle in World War is a PvP mission where players use their armies’ vehicles to complete the mission objectives and achieve victory. The easiest way to join a battle in an operation is to click the “To Battle” button, it will put you in the queue for one of the combat operations where there are free places for your team. If you want to join a particular battle, you can do it by clicking on the battle icon on the operational map – it’s a round icon with crossed swords.

Battle statuses and start requirements

WW Battle not begun.png
WW Battle preparing to start.png
WW Started battle (you can join).png
WW Automatic battle (you can not join).png
Battle not begun Battle preparing to start Started battle (you can join) Automatic battle (you can not join)

Battle statuses

A battle’s status is indicated by the colour of its icon:

  • White – the battle has not yet begun.
  • Yellow – the battle is getting ready to start.
  • Red – the battle has started, there are available places for players on your team.
  • Black – the battle has started, your team does not have any available places for players.
  • Gray – the battle is in automatic mode.

Conditions for starting battles

When armies collide, a battle is created with “Not started” status. You cannot enter the queue and join this kind of battle. Several conditions must be met before the battle status changes to “Getting ready to start”:

  • The number of available places in battles already started or being prepared does not exceed 5.
  • The number of battles already started or being prepared is more than twice the number of regiments participating in the operation.

Battles change to the “Getting ready to start” status in the order in which they appeared on the operational map.

Queue and priorities for joining a battle

A ready battle begins after one of the players enters the queue for this battle. The battle will begin even if the queue contains players from only one team, but there is a delay before the start of each battle to allow players of both teams to assemble.

If there are more people in the queue for the starting battle than the maximum number of players in the team, those who have queued earlier will get into the battle, but players of the squadron whose armies are participating in the battle take priority over other players.

If there are empty places on your team in a battle that has already started, you can join it at any time after it starts and before it ends.

Auto battles

Some battles in an operation are automatic. These battles take place without the participation of players, and the result is determined automatically. Auto battles start outside the main battle queue and bypass all start requirements. Auto battles are not instant; the battle result will be available only after a certain period.

Missions

The mission for each battle is selected based on the type and status of the clashing armies:

  • Fighters vs Fighters – Air Supremacy
  • Fighters vs Bombers – Cover
  • Bombers vs Bombers – Head-on Course
  • Aircraft vs Infantry or Armour – Convoy
  • Aircraft vs Infantry (Fortified) or Armour (Reinforced) – Anti-Air Defence
  • Armour vs Armour – Domination
  • Armour vs Infantry – Convoy
  • Armour vs Infantry (Fortified) or Armour (Fortified) – Defence

The type of terrain does not affect the choice of the mission location.

Vehicles

In battle, only the vehicles present in the armies participating in this battle are used, but it may not be available to the players – depending on the mission, some of the army’s vehicles may be controlled by the AI.

Any losses, no matter if the player or the AI was in control, are recorded as the army’s losses, and if a vehicle is lost in the middle of battle, respawning will no longer be possible.

Respawn mode

World War uses a respawn mode that reflects the confrontation between armies. Armies have a limited set of vehicles available for participating in battle, and they are randomly distributed among the players.

  • Several vehicles are available to the player. Vehicles are selected at random from the event list, and the probability of obtaining a particular model depends on the remaining number of vehicles among the team.
  • The available vehicles and quantity are distributed among the players of the regiment. If the player chooses to respawn available vehicles, other members of the squad or regiment will be able to join the battle on the remaining vehicles.
  • After taking a vehicle into battle, you must wait at least 60 seconds before taking the next vehicle.

Adding air armies

An air army can be added to a battle in progress, but only if another air army is not already participating in the battle on this side.

If the battle has already begun, the currently issued vehicles will not change for players, but each subsequent vehicle that players receive may be an aircraft.

Safe exit zones

Since each mission follows a confrontation between aircraft already in flight, another defining feature of World War missions is the absence of airfields. Instead, there are safe exit zones on the maps. If a player abandons an aircraft in a safe exit zone, the aircraft is recorded as a survivor and will not be deducted from the army, but it will no longer be available for use in this battle.