P-59A

From War Thunder Wiki
Revision as of 14:22, 27 October 2019 by *baked_Potato_rkm (talk | contribs) (External links)

Jump to: navigation, search
P-59A
p-59a.png
P-59A
Show in game
MARKET

Description

GarageImage P-59A.jpg


The P-59A is a gift rank IV American jet fighter with a battle rating of 5.3 (AB), 5.7 (RB), and 6.7 (SB). It was introduced during Update 1.89 "Imperial Navy" as a reward for the Operation H.E.A.T event. It is currently rare vehicle and is obtainable through the Gaijin Marketplace.

General info

Flight performance

The P-59A Airacomet is quite an unusual jet with a number of unique and quirky characteristics. Firstly, it has a very low battle rating considering it is a jet. This reason is due to how poor its performance is compared to every other jet and even worse than most super-props (P-51H, F8F-1B, Bf 109 K-4, G.56, I-225). Secondly, the aircraft is unbelievably maneuverable and able to out turn Spitfires at the BR with the correct usage of the combat flaps and rudder. These oddities make the Airacomet a very interesting plane to fly and is the complete opposite of 90% of jets the player might've flown before. The P-59 has excellent maneuverability and decent roll rate. However, the very terrible acceleration is something to keep an eye on, but in a straight line you will be able to catch other opponents. It will take a long time to get up to speed but sooner or later, you'll catch your opponent if they continue to go in a straight line.

Characteristics
Stock
Max Speed
(km/h at 9,144 m)
Max altitude
(meters)
Turn time
(seconds)
Rate of climb
(meters/second)
Take-off run
(meters)
AB RB AB RB AB RB
659 638 13000 20.9 21.4 16.1 15.3 457
Upgraded
Max Speed
(km/h at 9,144 m)
Max altitude
(meters)
Turn time
(seconds)
Rate of climb
(meters/second)
Take-off run
(meters)
AB RB AB RB AB RB
723 690 13000 19.2 20.0 23.4 19.5 457

Details

Features
Combat flaps Take-off flaps Landing flaps Air brakes Arrestor gear
X X
Limits
Wing-break speed
(km/h)
Gear limit
(km/h)
Combat flaps
(km/h)
Max Static G
+ -
520 ~10 ~6
Optimal velocities
Ailerons
(km/h)
Rudder
(km/h)
Elevators
(km/h)
Radiator
(km/h)
< 450 < 420 < 350 N/A
Compressor (RB/SB)
Setting 1
Optimal altitude 100% Engine power WEP Engine power
0 m 750 kgf 780 kgf

Survivability and armour

  • 6.35 mm steel plate mounted behind the armaments
  • 6.35 mm steel plate in front of the pilot
  • 38 mm bulletproof glass (63°) mounted in the windshield
  • 2 x 6.35 steel plates behind the pilot seat
  • 9.5 mm steel plate mounted behind the pilot's head

Armaments

Offensive armament

The P-59A is armed with:

  • 1 x 37 mm M10 cannon, nose-mounted (45 rpg)
  • 3 x 12.7 mm Browning M2 machine guns, nose-mounted (600 rpg = 1,800 total)

Usage in battles

There are three ways the player can use the P-59A; energy fighter, highly manoeuvrable dogfighter, or interceptor.

Energy Fighter

  • The P-59A is a decent energy fighter that can be used versus enemies with worse energy retention such as most twin-engine fighters and the Fw 190's, but should not be flown this way versus aircraft like Spitfires, 109's and Ki-84's, all of which have far superior energy retention, climb rates and speeds than you do. You should only try to out-stall an opponent when they are coming to you with an energy disadvantage, as the Airacomet has a relatively high stall speed and mediocre climb rate. It is to be noted however that the aircraft can very easily recover from a full stall but is a little unstable after having to pull the nose down.

Dogfighter

  • The role that P-59A excels the most at is as a medium-altitude dogfighter that can use its unbelievable manoeuvrability to the fullest. The only things that can keep up to you in turns are Zero's, Reppu's and the occasional Ki-61, but you can outspeed all of them very easily due to their very low top-end speeds. It is important to know that you can only outturn Spitfires and Yak-3's with appropriate use of combat flaps and efficient application of the aircraft's solid rudder. A smart pilot will also use the aircraft's great roll rate to help manoeuvre around opponents. The close-range nature of dogfighting is also a boon to the P-59A because of the 37 mm cannon's mediocre muzzle velocity of 610 m/s compared to the Browning's 900 m/s, and at close range, you do not have to worry about that difference.

Interceptor

  • The P-59A is a very solid interceptor that can easily climb up to bomber altitude and shred their airframes with the potent armament layout at its disposal. Be sure to steer clear of the gunners, as even though your airframe can take a beating, its never a good idea to tail a bomber with at least decent defensive armaments. One should come in at an oblique angle and aim at the wings and engines.

Specific enemies worth noting:

  • A6M5. The dreaded Zero is a thing to be feared and is one of very few aircraft that can turn with you. Under no circumstances are you to engage a Zero in a manoeuvring fight, as it'll turn circles around you. The Zero is plagued by several downfalls though, namely an extremely weak airframe and slow top-end speeds, and you can take advantage of these.
  • A7M2/A7M1. Being a cousin of the legendary Zero, you can expect a similar flight style between the two. The Reppu keeps the manoeuvrability of its cousin while improving speed, acceleration and armaments. Approach a Reppu the same way you would approach the Zero.

Modules

Tier Flight performance Survivability Weaponry
I Fuselage repair Offensive 12 mm
II Compressor Airframe New 12 mm MGs
III Wings repair Engine Offensive 37 mm
IV G-suit Cover New 37 mm cannons

Being a premium, all modules are unlocked upon acquiring the vehicle.

The recommended belts to use are Tracers for the Brownings and either Default or Universal for the 37 mm cannon.

Pros and cons

Pros:

  • Unbelievable manoeuvrability for a jet
  • Solid armament layout centred entirely in the nose
  • Great roll rate
  • Sturdy airframe which can take a beating
  • Tricycle landing gear to help with high-speed landings
  • Access to premium rewards
  • Very low repair cost

Cons:

  • Slow for a jet, unable to keep up with most super-props
  • Mediocre acceleration due to being an early jet aircraft
  • 37 mm cannon rounds can be less effective and easily deflected dut to the angle of attack
  • Large target when coming in from above or below
  • Wings are littered with fuel tanks

History

The P-59A Airacomet is the very first US jet-powered fighter, whose development began back in 1941, when the USA received the schematics for the Whittle turbojet engine from Great Britain. It was the Bell Aircraft Corporation that signed the contract to assemble the New World’s first jet-powered fighter. Despite the unicity of the task at hand and lack of experience in the development of jet-powered aircraft, the company was planning on launching a serial production of the fighter as opposed to just building a test unit. The first aircraft was assembled as early as 1942 and underwent testing until 1944 – the engineers were struggling to solve a multitude of technical issues caused by the new engines. Once the majority of the engine-tuning problems were fixed, it turned out that the flight characteristics of the new vehicle couldn’t surpass even those of serially produced piston-engine models. Nonetheless, a small series of P-59s was manufactured – a total of 66 aircraft branded “Airacomets”. The US jet-powered firstling failed to impress the military, and soon all combat aircraft were replaced with P-80 Shooting Stars.

- From Devblog

The Bell XP-59A Airacomet was America's first jet aircraft. For that reason alone, the aircraft is of historic significance. Although it never fired a shot in anger during World War II, it was nevertheless important in that it provided a lot of important data on the care and maintenance of jet aircraft, which proved invaluable when more advanced jet fighters came in to service.

The history of the Airacomet is one of the most interesting of any of the aircraft we have encountered so far in this series. For that, we must go back a bit and start with the Bell XP-52.

The Bell XP-52 was an unorthodox fighter project that arose out of a USAAC competition held in the winter of 1939 for a fighter that would be much more effective than any extant--with a top speed, rate of climb, maneuverability, armament, and pilot visibility, all of which would be far superior to those of any existing fighter. In addition, the fighter was required to have a low initial cost and had to be easy and inexpensive to maintain.

The USAAC issued its requirements to the industry in the form of Request for Data R-40C. No less than 50 responses came in. Among these was the Model 16, which the Bell company had developed some months earlier. Bell was famous for submitting unconventional designs, and the Model 16 was no exception. It had a round, barrel-shaped fuselage with the pilot seated in the nose and a 1250 hp Continental XIV-1430-5 liquid-cooled twelve-cylinder inverted vee engine mounted behind the pilot and driving a pair of contrarotating coaxial propellers operating in pusher fashion. The wing was mounted in mid-fuselage position, and was swept back at an angle of about 20 degrees. Twin booms were mounted about one-third of the way along the wings outboard of the fuselage. The horizontal tailplane at the rear connected the two booms. A tricycle landing gear was to be fitted, with the nosewheel retracting into the fuselage and the mainwheels retracting into the booms. Two 20-mm cannon were to be mounted in the lower fuselage, and three 0.50-in machine guns were to be mounted in the front of each of the twin booms.

One unusual feature of the Model 16 was the presence of an engine radiator cooing air intake mounted in the extreme nose. Nose-mounted air intakes were features which were later to be seen in jet-powered fighters.

By the end of 1940, the Army purchasing commission had chosen six of the submissions for further development. Among them was the Bell Model 16. A single prototype was ordered under the designation XP-52. However this order was canceled on November 25, 1941, before anything could be built. It was replaced by an order for another Bell design, based on the XP-52 but equipped with a more-powerful Pratt & Whitney R-2800-52 air-cooled radial engine rated at 2000 hp and driving a pair of three-bladed contrarotating pusher propellers. This aircraft was assigned the designation XP-59 by the US Army. The XP-59 had more-or-less the same unorthodox configuration as that of the XP-52, complete with the unusual nose intake. Estimated maximum speed was 450 mph at 22,000 feet, and service ceiling was to have been 38,000 feet.

In the meantime, something happened in England which was to alter radically the fate of the XP-59. In April of 1941, Major-General H. H. Arnold paid a visit to Britain. While there, he was shown the top-secret Gloster E-28/39 jet-powered aircraft, powered by one of Wing Commander Frank Whittle's W2B centrifugal turbojets. Work on jet-powered aircraft was well-advanced in Britain, and similar projects were underway in both Germany and Italy. The USA was clearly behind other major aircraft manufacturing nations in this revolutionary new form of aircraft propulsion. General Arnold was so impressed by the potentiality of this new technology that he immediately asked if American engineers could be given the blueprints of the new jet engine so that they could manufacture it under license in the USA. Since the US government was being so generous with its Lend-Lease aid to Britain, the RAF readily agreed.

On September 4, 1941, at a meeting at Wright Field, General Arnold asked the General Electric Corporation of Schenectady, New York to act as the prime American contractor for license production of the British jet engine. General Electric was selected for this work because of the company's extensive experience with turbines for various industrial and aviation applications. Fifteen jet engines were ordered. This work was to be carried out under the utmost secrecy.

The very next day, Bell Aircraft of Buffalo, New York was approached and asked if it would build a fighter aircraft powered by the new General Electric jet engines. The choice of Bell as prime contractor for the manufacture of the first American jet fighter is sort of curious. Some have suggested that Bell was chosen because, of all the primary aircraft manufacturers in the USA, it had the least work to do in building aircraft vital for the war effort. Others have suggested that Bell was chosen because of its flair for imaginative design. Still others claim that Bell was chosen by General Arnold for this assignment primarily because of its proximity to the General Electric plant, a primary concern if strict secrecy was to be maintained. Perhaps all of these factors played a role.

Bell accepted the assignment, and agreed to build three aircraft. They accepted a deadline to complete the first prototype eight months after signing the contract on September 30, 1941. The serial numbers of the three prototypes were to be 42-108784/108786.

In order to provide for strict secrecy, some rather extreme measures were taken. In order to provide a cover, the Bell jet fighter project was assigned the designation XP-59A. This was done in the hope that even if Axis intelligence were to get wind of the XP-59A project, they would mistakenly think that it was just an adaptation of the totally-unrelated XP-59 piston-engined pusher fighter. At this time, Bell engineers were already hard at work on the XP-59 pusher, but work on this project was quietly abandoned in the next couple of months as work on the jet fighter got under way. The XP-59 project was officially cancelled on December 1, 1941.

The General Electric jet engine was assigned the cover designation I-A, in the hope that enemy intelligence might mistake it for a new turbosupercharger.

So the XP-59A and its jet engines were an early example of a "black" project. Many more such "black" projects were to follow in later years.

With the XP-59A project being given the highest priority, work proceeded very rapidly. Since the General Electric jet engines were being designed and built in parallel with the XP-59A, Bell engineers had little or no knowledge about performance data of the engines, so they adopted a fairly conservative design approach. Within two months after the initial order, Bell engineers had submitted a design for a fairly conventional aircraft, with a cantilever, laminar-flow, mid-mounted wing and a fully-retractable tricycle landing gear. The aircraft was fitted with two 1400 lb. st. General Electric I-A jet engines, one mounted on either side of the fuselage under the wing roots. The aircraft had a high tailplane, well out of the way of the turbojet exhausts. It was fitted with a pressurized cockpit, still a rather unusual feature for the time. Access to the cockpit was through a side-hinged canopy. The fuselage was to be built in two sections, the forward section comprising armament bay and cabin, and the rear section being of stressed-skin semi-monocoque construction. All control surfaces were fabric covered and manually-operated, the ailerons being of the pressure-balance type with pressure seals. The aircraft was fitted with aerodynamically-balanced, fabric-covered flaps located inboard of the ailerons. Although the XP-59A was primarily viewed as a test-bed for jet engines, the USAAF also viewed it as a potential combat aircraft, and it was to carry a nose-mounted armament of two 37-mm cannon with 44 rpg.

The USAAF approved the initial design, and construction of the three prototypes got underway on January 9, 1942.

Without even waiting for the flight of the first XP-59A prototype, the USAAF ordered thirteen service test YP-59As in March of 1942. Serial numbers of the YP-59As were 42-108771/108783. These were to be powered by improved versions of the General Electric engine, the I-16 (later designated J-31) rated at 1650 lb. st. each. They were to have rearward-sliding cockpit canopies in place of the hinged canopies of the prototypes.

The first XP-59A prototype was ready by the late summer of 1942, and was ferried by rail out to Muroc Dry Lake, California (now Edwards AFB) on September 12, 1942. Once it arrived in California, it was fitted with a dummy propeller attached to its nose, just in case the curious might see it and start asking why this aircraft didn't have a propeller. On October 1, 1942, Bell's test pilot Robert Stanley was undergoing some high-speed taxiing trials with the XP-59A when the aircraft "inadvertently" became airborne for a short time. It made its first official flight the next day, with a USAAF pilot at the controls. This was remarkably rapid progress, the first flight of the prototype taking place only 13 months after the contract had first been awarded. The XP-59A weighted 7320 pounds empty and 12,562 pounds maximum loaded. Wingspan was 45 feet 6 inches, length was 28 feet 2 inches, height was 12 feet 4 inches, and wing area was 386 square feet.

As might be expected for such a revolutionary system of aircraft propulsion, there were serious problems right from the start. The jet engines were too heavy in relation to the amount of power they could develop, and their exhaust was so hot that the turbine blades regularly overheated and often broke off with catastrophic results. The maximum speed was 404 mph at 25,000 feet, somewhat below expectations. The engine installation was found to result in an inordinate amount of aerodynamic interference, and the aircraft was subject to severe directional snaking, making it a poor gun platform. Nevertheless, work on the P-59 continued unabated, and remedies were eventually found for its long list of faults.

The second XP-59A flew on February 15, 1943 and the third late in April.

The first YP-59A reached Muroc in June of 1943, and the USAAF gave the aircraft the name *Airacomet*. The first YP-59A flew in August of 1943. The YP-59A had more powerful 1650 lb. st. General Electric I-16 (J31) turbojets. However, the YP-59A showed little improvement in performance over the XP-59A. Empty weight increased to 7626 pounds, and maximum speed was a disappointing 409 mph at 35,000 feet. Service ceiling was 43,200 feet. The last four YP-59As had a heavier armament--three 0.50-inch machine guns and a single 37-mm cannon, which had been standardized for the production P-59A.

The third YP-59A (Ser No 42-22611) was shipped to Britain in exchange for the first production Gloster Meteor I. Upon arrival in England, it was assembled by Gloster at Moreton Vallance, where it was flown for the first time by a Bell test pilot on September 28, 1943. It was assigned the RAF serial number of RJ362/G. It was transferred to the Royal Aircraft Establishment at Farnborough on November 5, 1943. It was on the top-secret Jet Flight list (along with the Gloster E.28/39, the De Havilland Vampire, and the Gloster Meteor), but the Airacomet was flown very little because of unserviceability and the lack of spares. The RAF test pilots found the aircraft to be badly underpowered, with an unacceptably-long takeoff run. Like all other early jet-powered fighters, the Airacomet suffered from very poor engine acceleration.

In December of 1943, the US Navy got the eighth and ninth YP-59As (42-108778 and 42-100779) for use in tests. Some sources list their naval designation as being YF2L-1, which is sort of curious since the F2L designation was also used by a couple of Bell P-39Q Airacobras employed by the Navy as target aircraft. Perhaps this inconsistency was simply a part of the overall program of official deception, in the hope that enemy intelligence would mistakenly think that the jets were simply more naval Airacobras. In any case, the Airacomet was totally unsuited for carrier operations because of the poor view from its cockpit and the poor acceleration of its engines. In addition, the Airacomet suffered from a lack of adequate drag during landing approaches, so that there was a lot of "float" before touchdown when the power was cut. The lack of drag was primarily caused by the absence of dive brakes, which had been deliberately omitted because of the Airacomet's anticipated mediocre performance.

The last YP-59A had been delivered by the end of June 1944.

Shortly before the first flight of the XP-59A, the USAAF had placed an order for one hundred P-59A Airacomets. However, the performance of the YP-59A service test aircraft had proved to be rather disappointing, not even up to the standards of conventional piston-engined fighter aircraft already in service with the USAAF. It was considered rather unlikely that any appreciable improvements in the performance of the P-59 would be soon be forthcoming, and by the early fall of 1943 the Airacomet was no longer considered by the USAAF as being worthy of consideration as an operational combat type. The Airacomet was therefore relegated to the operational training role, and the P-59A order was halved on October 30, 1943.

The production P-59A differed very little from the YP-59A. Only the first twenty of the P-59A order were actually completed as P-59As. Serials were 44-22609/22628. Most of these P-59As were powered by a pair of 1650 lb. s.t. General Electric J31-GE-3 turbojets, although the last few were powered by uprated 2000 lb. st. J31-GE-5 turbojets. The J31-GE-5-powered P-59A had a maximum speed of 413 mph at 30,000 feet and 380 mph at 5000 feet. Range on internal fuel was 240 miles, and range with two 125-Imp. gall. drop tanks was 520 miles. An altitude of 10,000 feet could be reached in 3.2 minutes, and 20,000 feet in 7.4 minutes. Weights were 7950 pounds empty, 10,822 pounds loaded, 12,700 pounds maximum. Dimensions were wingspan 45 feet 6 inches, length 38 feet 10 inches, height 12 feet 4 inches, and wing area 385.8 square feet. Armament consisted of one 37-mm cannon and three 0.50-inch machine guns, all mounted in the nose. In addition, two 1000-pound bombs or eight 60-pound rockets could be carried on underwing racks.

The twenty-first and remaining twenty-nine Airacomets of the P-59A order were completed as P-59Bs. Serials were 44-22629/22658. They had the uprated J31-GE-5 jets of the later P-59As, but had internal fuel capacity increased by 55 Imp gall. Maximum range was increased to 950 miles. Empty weight of the P-59B was increased to 8165 pounds and normal and maximum loaded weights were 11,049 pounds and 13,700 pounds respectively. The last P-59B was delivered in May of 1945.

Most of the P-59s went to the 412th Fighter Group of the Fourth Air Force based at Muroc Dry Lake (later Edwards AFB), where they served in the training role. The Airacomets provided USAAF pilots and ground crews with valuable data about the difficulties and pitfalls involved in converting to jet aircraft. This information proved quite useful when more advanced jet fighters finally became available in quantity. A few P-59s were later modified and used as drone directors or manned target aircraft aircraft with a second cockpit installed forward of the main cockpit.

Although the Airacomet never saw service in its originally-intended role as a fighter aircraft, it nevertheless provided the USAAF with valuable orientation experience in the use of jet aircraft and furnished a nucleus of trained jet pilots.

The Airacomet was to have one other major impact on aviation history, one that is not generally recognized. Bell engineers undertook some initial work on a single-engined version of the Airacomet, which was designated XP-59B (not to be confused with the P-59B). It had a low-mounted wing and was to be powered by a single General Electric I-16 turbojet engine housed in the rear fuselage with an air inlet at the wing roots and an exhaust in the tail. However, the Buffalo plant was so busy with other projects that in late 1942 the USAAF transferred the preliminary drawings of the single-engined XP-59B to Lockheed, where it became the inspiration of the famed P-80 Shooting Star.

Media

Excellent additions to the article would be video guides, screenshots from the game, and photos.

See also

Links to the articles on the War Thunder Wiki that you think will be useful for the reader, for example:

  • reference to the series of the aircraft;
  • links to approximate analogues of other nations and research trees.

External links


USA jet aircraft
  Fighters
F-4  F-4C Phantom II · F-4E Phantom II · F-4J Phantom II · F-4S Phantom II
F-5  F-5A · F-5C · F-5E · F-20A
F-8  F8U-2 · F-8E
F-80  F-80A-5 · F-80C-10
F-84  F-84B-26 · F-84F · F-84G-21-RE
F-86  F-86A-5 · F-86F-25 · F-86F-2 · F-86F-35
F-89  F-89B · F-89D
F-100  F-100D
F-104  F-104A · F-104C
F-14  F-14A Early · F-14B
F-15  F-15A
F-16  F-16A · F-16A ADF · F-16C
F9F  F9F-2 · F9F-5 · F9F-8
Other  P-59A · F2H-2 · F3D-1 · F3H-2 · F4D-1 · F11F-1
  Strike Aircraft
FJ-4  FJ-4B · FJ-4B VMF-232
A-4  A-4B · A-4E Early
A-6  A-6E TRAM
A-7  A-7D · A-7E · A-7K
AV-8  AV-8A · AV-8C
A-10  A-10A · A-10A Late
B-57  B-57A · B-57B
F-105  F-105D
F-111  F-111A

USA premium aircraft
Fighters  Thach's F2A-1 · Galer's F3F-2 · F2G-1 · F4U-4B VMF-214 · P-26A-34 · P-40C · P-43A-1
  P-47M-1-RE · ⋠P-47M-1-RE · P-51A · P-51D-10 · P-51D-20-NA · ␠Kingcobra · XP-55
  ▃A6M2 · ▃Ki-43-II · ▃Ki-61-Ib · ▃Bf 109 F-4 · ▃Fw 190 A-8 · ▃Spitfire LF Mk IXc
Twin-engine fighters  XP-38G · Bong's P-38J-15 · P-38K · YP-38 · P-61A-11 · XF5F · XP-50 · F7F-3
Jet fighters  P-59A · F-86F-35 · F-89B · F-89D · F-4S Phantom II · F-5C · F-20A
Strike aircraft  A-1H · A2D-1 · AU-1 · XA-38 · AV-8A · A-6E TRAM · A-10A
Bombers  A-26C-45DT · B-10B · BTD-1 · PBM-3 "Mariner" · PV-2D