M85 (12.7 mm)
Contents
Description
The M85 is an American .50 cal (12.7 mm) heavy machine gun. The machine gun is mainly found in place of the Browning M2HB (12.7 mm) machine gun, on some high rank American Tanks (mainly as a commander's gun on the M48 and M60 Patton series). Being a 12.7 mm heavy machine gun the M85 has an ok amount of armour penetration, and higher damage output than medium and general purpose machine guns. This makes it much more effective at engaging weakly armoured enemy tank, as well as aircraft.
Vehicles equipped with this weapon
General info
The M85 is a fairly standard 12.7 mm heavy machine gun. Despite being a completely separate weapon, it preforms almost completely identically to the much more widespread Browning M2HB (12.7 mm) heavy machine gun.
Available shells
The M85 can only be equipped with one ammo belt consisting of one Armour Piercing Incendiary Tracer (API-T) bullet, followed by one Incendiary (I) bullet, followed by one Armour Piecing (AP) bullet, followed by another API-T bullet. The AP bullet has the most penetration at 26 mm maximum, followed by the API-T bullet with 23 mm maximum. The incendiary bullet has very poor penetration with a maximum penetration of 2 mm.
| Penetration statistics | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Ammunition | Penetration in mm @ 90° | ||||||||
| 10m | 100m | 500m | 1,000m | 1,450m | 1,500m | 2,000m | 2,500m | ||
| API-T | 23 | 22 | 16 | 10 | N/A | 6 | 5 | 3 | |
| I | 2 | 2 | 1.5 | 1 | 0.5 | 0 | 0 | 0 | |
| AP | 26 | 25 | 19 | 12 | N/A | 7 | 4 | 3 | |
| Shell details | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Ammunition | Velocity in m/s |
Projectile Mass in kg |
Fuse delay
in m: |
Fuse sensitivity
in mm: |
Explosive Mass in g (TNT equivalent): |
Normalization At 30° from horizontal: |
Ricochet: | ||
| 0% | 50% | 100% | |||||||
| API-T | 887 | 0.0403 | N/A | N/A | N/A | ??° | ??° | ??° | ??° |
| I | 944 | 0.041 | N/A | N/A | N/A | ??° | ??° | ??° | ??° |
| I | 856 | 0.046 | N/A | N/A | N/A | ??° | ??° | ??° | ??° |
Comparison with analogues
The M85 performs functionally identically to the Browning M2HB (12.7 mm) machine gun found on most previous American tanks, as well as in other nation's tech tree. Like the M2HB it has a slightly lower rate of fire than other 12.7 mm machine guns, but has a larger belt capacity.
Usage in the battles
Unlike lower calibre machine guns the M85 has enough penetration to be able to penetrate the armour of lightly armoured tanks (or the side / rear armour of some more heavily armoured tanks, bullets can also sometimes make it through armour holes such as the turret ring, or mg port of tanks, injuring crew members. Like all other machine guns it can be used for incapacitating exposed crew members, as well as marking enemy vehicles and obscuring the view of enemy players (shooting at their gun sight). It also does more damage to enemy aircraft than lower calibre machine guns, and is usually mounted on top of the turret, making aiming at aircraft much easier than with a co-axial gun. Clearing trees and bushes is another use.
Pros and cons
Pros:
- Enough penetration to damage some enemy vehicles
- Good belt capacity
- Rate of fire is ok
- 3/4 (75%) rounds in the belt have good penetration
Cons:
- Slower rate of fire than Soviet 12.7 mm machine guns
Historical part
The M85 is an American .50 cal heavy machine gun, which like the Browning M2HB chambered the .50 BMG (12.7×99mm NATO) round. In 1951 the US army started a program to produce a new .50 cal machine gun for ground and tank applications, replacing the extensively used Browning M2HB machine gun in those roles. The new weapon would have to be lighter and more compact than the M2HB, have a better rate of fire, and require reduced maintenance. In early 1956 the General Electric T175 prototype was selected for further development (with work on other weapons stopped) and in 1959 the T175E2 was adopted for production as the M85.
The weapon was substantially smaller and lighter than the M2HB, and had a fixed head-space (removing the need for head-space adjustment, which was regularly required on the M2HB). Although the rate of fire was not substantially improved compared the M2HB, the M85 was able to switch below low and high fire rates, unlike the M2. The weapon was fitted predominantly on the M48 / M60 "Patton" series of tanks, as well as the LVTP-7 amphibious vehicle. Despite it's theoretical improvements over the M2 the M85 shared a similar fate to the M73 (7.62 mm) machine gun. In service the weapon proved to be extremely complex compared to the M2 and rapidly became unpopular with tank crews due to very poor reliability. Due to its poor reliability the M85 was not fitted to the new M1 Abrams, and was eventually phased (as the M48 and M60 tanks left service). Ironically The M85 was replaced in service (on the LVTP-7 and M1 Abrams) by the Browning M2HB, the very weapon the M85 set out to replace.
A version of the M85 was designed to replace the M2 in infantry use, and designated M85C. Like the original M85 it proved to be extremely unreliable and unpopular during testing and was never adopted.
Media
An excellent addition to the article would be a video guide, as well as screenshots from the game and photos.
See also
External links
| Tank machine guns | |
|---|---|
| USA | |
| 7.62 mm | M37 · M60D · M73 · M240 · M1919A4 |
| 12.7 mm | FN M3P · M2HB · M80 · M85 |
| Germany | |
| 5.56 mm | MG4 |
| 7.62 mm | C6 · MG3A1 |
| 7.92 mm | MG13 Dreyse · MG34 · MG37(t) · MG42 |
| 12.7 mm | S.MG.50 |
| USSR | |
| 7.62 mm | DT · PKMB · PKT · PKTM · RP-46 · SGMT |
| 12.7 mm | DK · DShK · 6P49 · NSVT |
| 14.5 mm | KPVT |
| Britain | |
| 7.62 mm | Browning MG4 · L3A1 · L8A1 · L8A2 · L37A1 · L37A2 · L94A1 |
| 7.7 mm | Vickers |
| 7.92 mm | BESA |
| 12.7 mm | L21A1 |
| Japan | |
| 6.5 mm | Type 91 |
| 7.62 mm | Type 74 |
| 7.7 mm | Type 97 |
| 12.7 mm | Type 60 (B) |
| China | |
| 5.8 mm | QJT |
| 7.62 mm | Type 55 · Type 59 · Type 86 |
| 12.7 mm | QJC88A · Type 54 |
| 14.5 mm | QJG02 |
| Italy | |
| 7.62 mm | Beretta MG42/59 · FN MAG 60-40 |
| 8 mm | 34/40M · Breda Mod. 38 |
| 13.2 mm | Breda Model 31 |
| France | |
| 7.5 mm | AAT-52 · MAC 31 |
| 7.62 mm | A-A-F1N |
| 8 mm | Hotchkiss Mle 1914 |
| Sweden | |
| 6.5 mm | ksp m/14-29 |
| 7.62 mm | ksp 39 C · ksp 58 · ksp 94 |
| 8 mm | ksp m/36 · ksp m/39B |
| 12.7 mm | ksp 88 |
