|This page is about the Italian light tank M18 (Italy). For other versions, see M18 Hellcat (Family).|
The Semovente controcarri M18 da 76/52 is a rank III Italian light tank with a battle rating of 4.7 (AB/SB) and 5.7 (RB). It was introduced in Update "Starfighters".
The M18 "Hellcat" was the epitome of the American tank destroyer doctrine, it was very fast, very mobile, and has a powerful gun, though with a large trade-off with only 12.7 mm (0.5 inches) of armour.
The M18 "Hellcat" compensates the lack of anti-tank capability by having absurdly fast manoeuvrability. While it loses access to APCR, this is justified seeing how it doesn't face very armoured vehicles, the likes of Panther D, Tiger H1.
Unlike the other tank destroyers known in the game, the M18 "Hellcat" has access to a 360° traversable turret, allowing players to have a greater arc of fire than a typical casemate tank destroyer like the StuG III, but at the expense of a slightly higher profile. Americans tank destroyers also have very high manoeuvrability compared to other nation's tank destroyers, allowing it to flank the enemy.
The main weak point of M18 is its very thin armour, a feature that actually allows the M18 to reach its high speed. The thin armour makes it possible for any enemy tanks to penetrate the vehicle. A single hit would destroy many critical components in the M18 or cripple the crew. The only saving grace is that standard AP rounds may over-penetrate the armour, doing minimal damage to the internals. Thus, when facing the M18, it's best to use AP rounds with explosive fillers or HE and HEAT rounds while avoiding usage of pure AP rounds.
Survivability and armour
The M18 (Italy) has extremely thin armour throughout its construction. As such, a player with the M18 should throw away any notion of trying to survive a shot and instead aim to avoid being hit at all. With an open-top construction and the placement of certain crew members, even enemy machine gun rounds can knock out the crew members inside and lower combat efficiency.
The thin armour is also both a blessing and a curse for the vehicle. It is a curse as it means the vehicle can suffer through the overpressure damage mechanics. A single HE shell has the potential of knocking out the M18 instantly regardless of its calibre. The blessing is that if the enemy kinetic round hits the M18 without triggering the fuze, the M18 may end up with minimum critical damage such as a damaged module or crew member. As such, there can be second chances for this vehicle, but this should not be relied upon as a combat strategy.
With five crew members, the M18 has a standard amount of crew to survive off of. Three are essential for combat efficiency: the gunner, loader, and driver. The commander operates the cupola machine gun and if knocked out will cause the machine gun to no longer function. This will be a constant occurrence due to the position of the commander model with the torso exposed above the turret, and so enemy machine gun rounds can hit and incapacitate the commander from the vehicle's functions.
The M18's module configuration is rather standard with the transmission in front and engine in the back. The spread out nature means there are more "wiggle room" for kinetic shells to hit and pass through around the modules.
- Rolled homogeneous armour
- Cast homogeneous armour (Gun mantlet)
|Armour||Front (Slope angle)||Sides||Rear||Roof|
|Hull|| 12.7 mm (39-64°) Front glacis
12.7 mm (23-52°) Lower glacis
| 12.7 mm (23-26°) Top
12.7 mm Bottom
| 12.7 mm (12°) Top
12.7 mm (36°) Bottom
|Turret|| 25.4 mm (15-26°) Turret front
19 mm + 25.4 mm (0-55°) Gun mantlet
|12.7 mm (1-21°)||12.7 mm (7°)|| N/A Open-top |
8 mm Bustle and Front
- Suspension wheels and tracks are 15 mm thick.
- Belly armour is 5 mm thick.
- The hull underside right above the tracks are only 8 mm thick.
- Tracks are attached the turret rear, granting some 15 mm in thickness.
|Game Mode||Max Speed (km/h)||Weight (tons)||Engine power (horsepower)||Power-to-weight ratio (hp/ton)|
Though the previous section on armour may imply poor survivability, the M18 (Italy)'s shining trait will be in its mobility. It produces enough engine horsepower to become a speed demon on the battlefield, quickly traversing through rough terrain to get to advantageous positions to ambush enemies that are just starting to get to the fight.
The vehicle displays great mobility when driving forwards and backwards, and so it can perform quick exits from a compromised position.
Modifications and economy
As with every ground vehicle Parts and FPE are an absolute top priority. Following that, depending on player preferences, one of 3 should be researched: Horizontal Drive (close-range, flanking), Suspension (medium-range) or Adjustment of Fire (long-range of a typical engagements). Following this the goal is to get rank IV mobility improvements in order Filters -> Engine -> Transmission. On rank III, along the way, the Crew Replenishment should be prioritized, as its an open-top vehicle, so it will suffer significant causalities from enemy airplanes. If your preferred engagement range is above 700 m then the Elevation Mechanism should be researched. Otherwise: Mobility upgrades are the most important, shells are the lowest priority, as even the situational advantage of the M93 shot is not worth researching over improved mobility, or even accuracy.
The 76 mm M1 is an extremely capable gun with a high damage potential and a very good gun handling. Once upgraded, the turret has very fair guidance in both: horizontal and vertical axis allowing to quickly catch pot-shots, though given exceptional mobility of the platform even it struggles to catch up with the near-instant hull rotation.
|76 mm M1||Turret rotation speed (°/s)||Reloading rate (seconds)|
- M79 shot - AP - Stock round, has decent penetrative power but no explosive filler. Replace with the M62 shell as soon as possible.
- M42A1 shell - HE - The best round for dealing with unarmoured targets or unarmoured sections of vehicles. It should be used carefully, as everything over 10 mm armour can negate its effects. Typically M62 is superior.
- M62 shell - APCBC - The best anti-tank shell. It has very good penetration and an excellent post-penetration effect.
|Ammunition|| Type of
|Penetration @ 0° Angle of Attack (mm)|
|10 m||100 m||500 m||1,000 m||1,500 m||2,000 m|
|Ammunition|| Type of
| Fuse delay
| Fuse sensitivity
| Explosive mass
(TNT equivalent) (g)
|Smoke shell characteristics|
| Screen radius
| Screen deploy
| Screen hold
| Explosive mass|
(TNT equivalent) (g)
|45||37 (+8)||27 (+18)||17 (+28)||9 (+36)||1 (+44)||No|
- Turret empty: 37 (+8) shells.
- When fighting in downtiers it's best to take only 17 shells, which allows the turret and sides of the tank to be empty of shells, notably increasing survivability.
|12.7 mm M2HB|
|Mount||Capacity (Belt)||Fire rate||Vertical||Horizontal|
Usage in battles
Before all, avoid colourful or bright decals. Camouflage is the main part of the M18's defence. Chances for good performance in battle are: be "invisible", fast and effective. The M18's speed is its best ally. This speed has to be used for flanking manoeuvres and relocate. Not for trying to cross an open field, that will leave it open to enemy fire, speed is not a substitute for armour.
Relocate: - This movement will have to be done again and again. Choose a good spot wisely, remove the foliage if necessary to get a clear field of fire. When in the fire spot, use the gun depression and stay in a hull-down position until a target is located. Once a target is locked on, aim at critical components. Try to immobilize the enemy by firing at the engine or transmission, or remove their firepower by shooting the gun or breech, or for instant destruction with a shot to the ammo storage. The last option can work very well or not, as skilled players only carry a few rounds of ammo. If positive that the enemy hasn't discovered the firing spot, go for another shot. Stay attentive that none of the enemy's teammates has also located the firing spot. If detected, hide immediately and relocate.
Flanking: is the most dangerous manoeuvre of all because the vehicle will have to be exposed as it moves to the enemy's rear, but it is very effective when it's coordinated with other vehicles. A distraction is needed to gain the enemy's attention while the M18 makes its move. Isolated enemy units are very vulnerable to this tactic. Using the M18 speed to get to the rear and as the enemy heads toward the objective, the firing perspective should give a very clear view of the enemy's side armour. A good shot with the M62 APCBC shell could knock out the enemy rather quickly, but if using solid AP shots like the M79, aim at critical components on mobility and firepower before knocking out the crew or ammo stowage.
Avoid flat terrain - Flat terrain means that the Hellcat will become an easy target for virtually any vehicle by exposure, especially when not moving or when moving in a straight line. Open plains are the bane of the Hellcat. Whenever possible, one should try to stay amongst hills.
Pros and cons
- Overall mobility is superb, with very responsive manoeuvring that allows the Hellcat to excel in flanking manoeuvres
- Fast reload speed and turret traverse
- M62 APCBC round has great penetration and lots of explosive fillers, rarely requiring more than one penetrating shot to kill common tanks like T-34-85, M4A3, Cromwell, IS-1 and IS-2
- Low profile, reducing target size and allows it to hide behind small bushes or rocks easily
- The nature of its thin armour means AP rounds have a tendency to pass straight through without damaging modules, and an APHE fuse may not even be triggered. For example the Soviet 122 mm tend to overpenetrate, dealing little damage
- Thin armour means rapid-fire autocannons, heavy machine guns, and aerial weapons could easily shred it. Beware of the ZSD63 and the GAZ trucks
- Commander is exposed at the 0.50 cal machine gun mount, and knocking him out would render the weapon useless
- Open-top construction means the crew is vulnerable to to aircraft strafing and overpressure: artillery strikes and chemical shells can knock out easily the vehicle
- Gun has poor penetration in an uptier, often can't penetrate anything frontally unless hitting a weak spot. The M4A3E2 and M26 are frontally immune to this 76 mm M1
- Doesn't have access to APCR unlike its American counterpart
- Rarely reaches 50 km/h in Realistic Battles, even in a straight line, therefore can be outran by the Sd.Kfz.234 series
- A moment of immobility due to a damaged engine or transmission could be a sign of impending doom for the M18
Throughout the Second World War, the USA would be experimenting with many different tanks and military vehicles, in the hopes they'd be put into service to help the war effort. In December of 1941, a new requirement from the US high command would initially request a vehicle which incorporated the Christie suspension system, and armed with a 37 mm gun. Considering that during those times, for most new vehicles, they were often derived from a previous existing design, mainly done to save time and money, this requirement instead called for a radical new tank design rather than a derivative of an existing tank, such as the M4 Sherman. Whilst the war was ongoing, the US high command would begin to alter the requirements, mainly due to more powerful enemy vehicles showing up on the battlefield. One of the first changes done during the development was to introduce the new and innovative Torsion bar suspension made by the Buick Motor Division, who were part of General Motors. Later another change was to mount the British made QF 6-pounder gun which at the time would be in use on the British Churchill Mk III tanks. This would lead to one of the prototype vehicles to be made, which would be called T49 GMC. Tests proved to yield adequate results but still weren't up to standard, the US Army wanted the heavier 75 mm gun which at the time would be mainly used on the various Shermans in service. In the end this lead to the T67 GMC prototype, this got closer to the requirements but the US high command felt that more could be done. Finally, the US army decided to mount the 76 mm gun also in development for the Sherman onto the prototype, which now was known as the T70 GMC. Obviously changes to hull shape and turret had to be done, mainly to accommodate all the new requirements and armament set out by the US high command. After some refinement in the design, the US high command eventually approved the prototype for service and finally designated the vehicle as the M18 GMC. The vehicle started production in mid-1943, which went on until October 1944 with a grand total 2,507 units produced. They'd be extensively used, and would yield great results for the most part.
The story of the Italian M18, also known as the 'Semovente da 76/52', would officially start in the post-war period. The Italian army, and its armoured divisions for the most part ceased to exist, although the US and other allied countries would slowly begin to re-equip the Italian army with surplus equipment. Italy would also begin to restore some of their own WW2 era equipment which managed to survive the war into working order and promptly put them into service. As the early dawn of the Cold War was looming, and the Italian armed forces being fairly weak, it was decided that a series of rearmament programs begin. Luckily, the USA had a lot of surplus equipment that they did not need anymore and were willing to invest heavily in rearming the Italian army through the 'MAP' (Military Assistance Program). It was decided that Italy would receive a total of 130 M18 GMCs, which would all be finally delivered during July of 1952. The M18 Hellcats were renamed to 'Semovente da 76/52', re-painted, and as many Italian vehicles, had the side-skirts removed. In terms of service, the Semovente da 76/52 would be allocated to the 155th Artillery Regiment of the 5th Army Corps which garrisoned the regions of Veneto and Friuli Venezia Giulia near the Eastern border. They'd have a good reputation, and loosely followed standard Italian doctrine, which usually entails light vehicles with a good gun. Although they would have likely been in the front lines if a war between East and West ever broke out, they never saw combat action. During training, some Italian versions of the vehicle would install a machine gun, usually a Browning of some sort, onto the cannon. They'd be slowly be phased out for more modern designs who could be used as tank destroyers as the Cold War raged on.
Links to the articles on the War Thunder Wiki that you think will be useful for the reader, for example:
- reference to the series of the vehicles;
- links to approximate analogues of other nations and research trees.
Paste links to sources and external resources, such as:
- topic on the official game forum;
- other literature.
|Buick Division of General Motors|
|Tank Destroyers||M18 GMC · M18 "Black Cat" · Super Hellcat|
|Export||␗M18 GMC · ▄M18|
|Note||Buick is a division of General Motors (GM).|
|Italy light tanks|
|L6/40||L6/40 · L6/40 (31 Rgt.)|
|Autoblindo Fiat-Ansaldo||AB 41 · AB 43|
|Fiat 6614/6616||FIAT 6614 · AUBL/74 · AUBL/74 HVG|
|R3 Capraia||R3 T106 FA|
|Centauro||Centauro I 105 · Centauro I 105 R · Centauro I 120 · VRCC|
|IFV||C13 T90 · Dardo · VCC-80/60 · VCC-80/30 · VBC (PT2)|
|USA||▄M3A3 · ▄M24 · ▄M18|