Difference between revisions of "Conqueror"

From War Thunder Wiki
Jump to: navigation, search
Visual (beta)Wikitext
Line 2: Line 2:
  
 
== Description ==
 
== Description ==
−
''In the description, the first part needs to be about the history of the creation and combat usage of the vehicle, as well as its key features. In the second part, tell the reader about the ground vehicle in the game. Insert the screenshot of the vehicle. If the novice player does not remember the vehicle by name, they will immediately understand what kind of vehicle it is talking about.''
+
<!--''In the description, the first part needs to be about the history of the creation and combat usage of the vehicle, as well as its key features. In the second part, tell the reader about the ground vehicle in the game. Insert the screenshot of the vehicle. If the novice player does not remember the vehicle by name, they will immediately understand what kind of vehicle it is talking about.''-->
 +
[[File:GarageImage_Conqueror.jpg|420px|thumb|left]]
 +
{{break}}
 +
The '''Tank Heavy Gun Conqueror Mk.2''' is a Rank V British heavy tank with a battle rating of 7.7 (AB/SB) and 7.3 (RB). It was released along with the initial British tree line in [[Update_1.55_"Royal_Armour"|Update 1.55 "Royal Armour"]]. Meant to defeat the Soviet [[IS-3]], the Conqueror gives the British tree line an emphasis in armour and firepower, with a [[120 mm Gun M58|120 mm gun]] able to contest the Rank V competitors.
 +
 
 +
The Conqueror shares the same hull as the [[Caernarvon]], but features a completely new turret armed with the Ordnance QF 120 mm L1A1 gun. The turret is significantly better armoured than the Centurion turret used by the Caernarvon. In a hull-down position where the weak lower front plate is hidden, it can be a very difficult vehicle to destroy from the front. Unfortunately, the side and rear hull armour is very weak, although it is covered by a lot of spaced armour. Flanking the Conqueror usually results in its swift destruction.
 +
 
 +
The 120 mm gun used by the Conqueror is essentially a version of the American 120 mm Gun M58 used by the M103 heavy tank. Unfortunately, the British version does not have access to the extremely lethal American solid shot AP or HEAT ammunition. The Conqueror is thus forced to choose between the anaemic APDS or unreliable HESH ammunition, while also sharing the same long reload as the American gun.
 +
 
 +
In general, the APDS is quite accurate at long ranges thanks to its high velocity, and the high penetration usually means it will not have too many problems penetrating most things the Conqueror will encounter. However, the post-penetration effects of APDS tend to be very poor compared to full-bore AP, and it is very rare to one-shot opponents. This problem is further exacerbated by the Conqueror's long reload, which is longer than the time it takes to replace a crewmember if facing a opponent with good crew skills. The HESH round will do a lot of damage ''if'' it hits and penetrates, but is easily frustrated by spaced armour and external components like tracks or suspension elements. It also has a relatively low velocity and is harder to use at long ranges.
 +
 
 +
The mobility of the Conqueror is fair enough for a 65 t heavy tank, and is comparable to the Centurion.
  
 
== General info ==
 
== General info ==
 
=== Survivability and armour ===
 
=== Survivability and armour ===
−
''Describe armour protection. Note the most well protected and key weak areas. Appreciate the layout of modules as well as the number and location of crew members. Is the level of armour protection sufficient, is the placement of modules helpfull for survival in combat?''
+
<!--''Describe armour protection. Note the most well protected and key weak areas. Appreciate the layout of modules as well as the number and location of crew members. Is the level of armour protection sufficient, is the placement of modules helpfull for survival in combat?''
  
−
''If necessary use a visual template to indicate the most secure and weak zones of the armour.''
+
''If necessary use a visual template to indicate the most secure and weak zones of the armour.''-->
 +
'''Armour type:'''
 +
* Rolled homogeneous armour
 +
* Cast homogeneous armour (Turret)
 +
* Structural steel (Side skirts)
 +
{| class="wikitable" style="text-align:center"
 +
|-
 +
! Armour !! Front !! Sides !! Rear !! Roof
 +
|-
 +
| Hull || 130 mm (60°) ''Front glacis'' <br> 76.2 mm (44°) ''Lower glacis'' || 50.8 + 4 mm || 38 mm ''Top'' <br> 20 mm (61°) ''Bottom'' || 44 mm ''Front'' <br> 17 mm ''Crew hatches'' <br/> 17 mm ''Rear''
 +
|-
 +
| Turret || 152-313 mm (0-68°) ''Turret front'' <br> 140-200 mm (0-78°) ''Gun mantlet'' || 89-313 mm (1-48°) || 50 mm (1-34°) || 50.8 mm <br> 31 mm ''Square area near gun''
 +
|-
 +
! Armour !! Front !! Rear !! Roof
 +
|-
 +
| Cupola || 203 mm (0-17°) || 70 mm (12-14°) || 50.8 mm <br> 17 mm ''Crew hatches''
 +
|-
 +
|}
 +
'''Notes:'''
 +
* Suspension wheels and bogies are 20 mm thick while tracks are 30 mm thick.
 +
* Front of turret vary in armour thickness, from 152 mm to 313 mm, but it is all very sloped due to turret design.
 +
* The front of the turret roof has an additional armour plate of 31 mm in thickness.
  
 
=== Mobility ===
 
=== Mobility ===
−
''Write about the mobility of the ground vehicle. Estimate the specific power and maneuverability as well as the maximum speed forward and backward.''
+
<!--''Write about the mobility of the ground vehicle. Estimate the specific power and maneuverability as well as the maximum speed forward and backward.''-->
 +
{| class="wikitable" style="text-align:center"
 +
|-
 +
!colspan="3" | Mobility characteristic
 +
|-
 +
! Weight (tons)
 +
!colspan="1" | Add-on Armour<br>weight (tons)
 +
!colspan="1" | Max speed (km/h)
 +
|-
 +
|rowspan="2" | 66.0 || colspan="1" rowspan="2" | 1.1 || colspan="1" | 37 (AB)
 +
|-
 +
|34 (RB/SB)
 +
|-
 +
!colspan="3" | Engine power (horsepower)
 +
|-
 +
!colspan="1" | Mode
 +
!Stock
 +
!Upgraded
 +
|-
 +
|''Arcade''
 +
|1,046
 +
|____
 +
|-
 +
|''Realistic/Simulator''
 +
|716
 +
|810
 +
|-
 +
!colspan="3" | Power-to-weight ratio (hp/ton)
 +
|-
 +
!colspan="1" | Mode
 +
!Stock
 +
!Upgraded
 +
|-
 +
|''Arcade''
 +
|15.85
 +
|__.__
 +
|-
 +
|''Realistic/Simulator''
 +
|10.85
 +
|12.27
 +
|-
 +
|}
  
 
== Armaments ==
 
== Armaments ==
 
=== Main armament ===
 
=== Main armament ===
−
''Give the reader information about the characteristics of the main gun. Assess its effectiveness in a battle based on the reloading speed, ballistics and the power of shells. Do not forget about the flexibilty of the fire, that is how quickly the cannon can be aimed at the target, open fire on it and aim at another enemy. Add a link to the main article on the gun: <code><nowiki>{{main|Name of the weapon}}</nowiki></code>. Describe in general terms the ammunition available for the main gun. Give advice on how to use them and how to fill the ammunition storage.''
+
<!--''Give the reader information about the characteristics of the main gun. Assess its effectiveness in a battle based on the reloading speed, ballistics and the power of shells. Do not forget about the flexibilty of the fire, that is how quickly the cannon can be aimed at the target, open fire on it and aim at another enemy. Add a link to the main article on the gun: <code><nowiki>{{main|Name of the weapon}}</nowiki></code>. Describe in general terms the ammunition available for the main gun. Give advice on how to use them and how to fill the ammunition storage.''-->
 +
{{main|L1A2 (120 mm)}}
 +
 
 +
{| class="wikitable" style="text-align:center"
 +
|-
 +
! colspan="6" | [[L1A2 (120 mm)|120 mm L1A2]]
 +
|-
 +
! colspan="3" rowspan="1" style="width:5em" |Capacity
 +
! rowspan="1" | Vertical <br> guidance
 +
! rowspan="1" | Horizontal <br> guidance
 +
! rowspan="1" | Stabilizer
 +
|-
 +
| colspan="3" | 35 || -7°/+15° || ±180° || Two-plane
 +
|-
 +
! colspan="6" | Turret rotation speed (°/s)
 +
|-
 +
! style="width:4em" |Mode
 +
! style="width:4em" |Stock
 +
! style="width:4em" |Upgraded
 +
! style="width:4em" |Prior + Full crew
 +
! style="width:4em" |Prior + Expert qualif.
 +
! style="width:4em" |Prior + Ace qualif.
 +
|-
 +
| ''Arcade'' || 9.7 || __.__ || __.__ || __.__ || __.__
 +
|-
 +
| ''Realistic'' || 9.7 || __.__ || __.__ || __.__ || __.__
 +
|-
 +
! colspan="4" | Reloading rate (seconds)
 +
|-
 +
! colspan="1" style="width:4em" |Stock
 +
! colspan="1" style="width:4em" |Prior + Full crew
 +
! colspan="1" style="width:4em" |Prior + Expert qualif.
 +
! colspan="1" style="width:4em" |Prior + Ace qualif.
 +
|-
 +
| 19.4 || __.__ || __.__ || __.__
 +
|-
 +
|}
 +
 
 +
===== Ammunition =====
 +
{| class="wikitable sortable" style="text-align:center" width="100%"
 +
! colspan="8" | Penetration statistics
 +
|-
 +
! rowspan="2" data-sort-type="text" | Ammunition
 +
! rowspan="2" class="unsortable" | Type of <br /> warhead
 +
! colspan="6" | '''Penetration''' '''''in mm''''' '''@ 90°'''
 +
|-
 +
! 10m
 +
! 100m
 +
! 500m
 +
! 1000m
 +
! 1500m
 +
! 2000m
 +
|-
 +
| Shot L1G || APDS || 362 || 361 || 359 || 354 || 339 || 321
 +
|-
 +
| Shell L1TK || HESH || 152 || 152 || 152 || 152 || 152 || 152
 +
|-
 +
|}
 +
{| class="wikitable sortable" style="text-align:center" width="100%"
 +
! colspan="11" | Shell details
 +
|-
 +
! rowspan="2" data-sort-type="text" | Ammunition
 +
! rowspan="2" class="unsortable" | Type of <br /> warhead
 +
! rowspan="2" |Velocity <br /> in m/s
 +
! rowspan="2" |Projectile<br />Mass in kg
 +
! rowspan="2" | ''Fuse delay''
 +
''in m:''
 +
! rowspan="2" | ''Fuse sensitivity''
 +
''in mm:''
 +
! rowspan="2" | ''Explosive Mass in g<br /> (TNT equivalent):''
 +
! rowspan="2" | ''Normalization At 30° <br> from horizontal:''
 +
! colspan="3" | ''Ricochet:''
 +
|-
 +
! 0%
 +
! 50%
 +
! 100%
 +
|-
 +
| Shot L1G || APDS || 1493 || 7.6 || N/A || N/A || N/A || +1.5° || 75° || 78° || 80°
 +
|-
 +
| Shell L1TK || HESH || 792 || 16 || 0.4 || 0.1 || 3,100 || +0° || 73° || 77° || 80°
 +
|-
 +
|}
 +
 
 +
===== [[Ammo racks|Ammo racks]] =====
 +
[[File:Ammoracks_Conqueror.png|right|thumbnail|x250px|[[Ammo racks|Ammo racks]] of the Conqueror Mk.2.]]
 +
{| class="wikitable sortable" style="text-align:center"
 +
|-
 +
! class="wikitable unsortable" |Full<br /> ammo
 +
! class="wikitable unsortable" |1st<br />  rack empty
 +
! class="wikitable unsortable" |2nd<br />  rack empty
 +
! class="wikitable unsortable" |3rd<br />  rack empty
 +
! class="wikitable unsortable" |4th<br />  rack empty
 +
! class="wikitable unsortable" |5th<br />  rack empty
 +
! class="wikitable unsortable" |6th<br />  rack empty
 +
! class="wikitable unsortable" width="10%" |Recommendations
 +
! class="wikitable unsortable" |Visual<br /> discrepancy
 +
|-
 +
|| '''35''' || 31&nbsp;''(+4)'' || 21&nbsp;''(+14)'' || 16&nbsp;''(+19)'' || 11&nbsp;''(+24)'' || 6&nbsp;''(+29)'' || 1&nbsp;''(+34)'' || style="text-align:left" | No
 +
|-
 +
|}
  
−
=== Additional armament ===
+
Keep ammo at around 16&nbsp;''(+19)'' or 11&nbsp;''(+24)''  
−
''Some tanks are armed with several guns in one or more turrets. Evaluate the additional weaponry and give advice on its use. Describe the ammunition available for additional weaponry. Give advice on how to use them and how to fill the ammunition storage. If there is no additional weaponry remove this subsection.''
 
  
 
=== Machine guns ===
 
=== Machine guns ===
−
''Offensive and anti-aircraft machine guns not only allow you to fight some aircraft, but also are effective against lightly armoured vehicles. Evaluate machine guns and give recommendations on its use.''
+
<!--''Offensive and anti-aircraft machine guns not only allow you to fight some aircraft, but also are effective against lightly armoured vehicles. Evaluate machine guns and give recommendations on its use.''-->
 +
{{main|L3A1 (7.62 mm)}}
 +
 
 +
{| class="wikitable" style="text-align:center"
 +
|-
 +
! colspan="7" | [[L3A1 (7.62 mm)|7.62 mm L3A1]]
 +
|-
 +
! colspan="7" | ''Coaxial mount''
 +
|-
 +
! colspan="4" rowspan="1" style="width:5em" |Capacity (Belt capacity)
 +
! rowspan="1" | Fire rate <br> (shots/minute)
 +
! rowspan="1" | Vertical <br> guidance
 +
! rowspan="1" | Horizontal <br> guidance
 +
|-
 +
| colspan="4" | 3,750 (250) || 500 || N/A || N/A
 +
|-
 +
! colspan="7" | ''Pintle mount''
 +
|-
 +
! colspan="4" rowspan="1" style="width:5em" |Capacity (Belt capacity)
 +
! rowspan="1" | Fire rate <br> (shots/minute)
 +
! rowspan="1" | Vertical <br> guidance
 +
! rowspan="1" | Horizontal <br> guidance
 +
|-
 +
| colspan="4" | 3,750 (250) || 500 || -10°/+30° || ±90°
 +
|-
 +
|}
  
 
== Usage in the battles ==
 
== Usage in the battles ==
−
''Describe the tactics of playing in the vehicle, the features of using vehicles in the team and advice on tactics. Refrain from creating a "guide" - do not impose a single point of view but give the reader food for thought. Describe the most dangerous enemies and give recommendations on fighting them. If necessary, note the specifics of the game in different modes (AB, RB, SB).''
+
<!--''Describe the tactics of playing in the vehicle, the features of using vehicles in the team and advice on tactics. Refrain from creating a "guide" - do not impose a single point of view but give the reader food for thought. Describe the most dangerous enemies and give recommendations on fighting them. If necessary, note the specifics of the game in different modes (AB, RB, SB).''-->
 +
The Conqueror performs best at longer ranges as a support tank where it can make the best use of its accurate, high-penetration 120 mm gun as well as its and heavy frontal armour, especially in terrain that allows it to go hull-down.
 +
 
 +
===Modules===
 +
As per usual,"Parts" and "FPE" should be the focus first for modifications to increase combat survivability. Everything else is fair game after you get those two.
 +
 
 +
It is then recommended to head for the "Additional Ballistic Protection Package" in order to increase the armour of the Conqueror to stand up to more lethal rounds.
  
 
=== Pros and cons ===
 
=== Pros and cons ===
−
''Summarize and briefly evaluate the vehicle in terms of its characteristics and combat effectiveness. Mark its pros and cons in a bulleted list. Do not use more than 6 points for each of the characteristics. Avoid using categorical definitions such as "bad", "good" and the like - they have a substitution in the form of softer "inadequate", "effective".''
+
<!--''Summarize and briefly evaluate the vehicle in terms of its characteristics and combat effectiveness. Mark its pros and cons in a bulleted list. Do not use more than 6 points for each of the characteristics. Avoid using categorical definitions such as "bad", "good" and the like - they have a substitution in the form of softer "inadequate", "effective".''-->
−
 
 
 
'''Pros:'''
 
'''Pros:'''
−
*
+
* 361 mm stock penetration with the high-velocity APDS.
 +
* Accurate at long ranges.
 +
* Turret is well armoured and well shaped to deflect rounds.
 +
* HESH ammunition with good explosive filler,
 +
* Extremely sloped and well-armoured upper glacis
 +
* Both APDS and HESH ammunition rarely ricochet off tanks.
 +
* The coaxial MG can be used as a ranging gun, its bullets land where the HESH shell will approximately hit.
 +
* Now has add on armour, which offers more protection to the sides and front.
  
 
'''Cons:'''
 
'''Cons:'''
−
*
+
* Poor lethality with APDS.
 +
* Unreliable HESH ammunition that is harder to aim due to lower velocity.
 +
* Long reload time.
 +
* Very weak side hull armour.
 +
* Only four crew members (crew can be easily knocked out).
 +
* Top speed is subpar (33 km/h).
 +
* Poor acceleration.
 +
* Weak lower glacis plate.
  
 
== History ==
 
== History ==
−
''Describe the history of the creation and combat usage of the ground vehicle in more detail than in the introduction. If the historical reference turns out to be too big, take it to a separate article, taking a link to an article about the vehicle and adding a block "/historical reference" (example: https://wiki.warthunder.com/Name-vehicles/historical reference) and add a link to it here using the <code>main</code> template. Be sure to include links to sources at the end of the article.''
+
<!--''Describe the history of the creation and combat usage of the ground vehicle in more detail than in the introduction. If the historical reference turns out to be too big, take it to a separate article, taking a link to an article about the vehicle and adding a block "/historical reference" (example: https://wiki.warthunder.com/Name-vehicles/historical reference) and add a link to it here using the <code>main</code> template. Be sure to include links to sources at the end of the article.''-->
 +
===Development===
 +
In 1944, General Staff started a project called ''A45 Infantry Support Tank'', which started around the same time as the development of the [[Centurion Mk.3|A41 Centurion]] cruiser tank. This project, after the war, was redesignated from a typical "Infantry Tank" and instead focused on a new role of a "Universal Tank" design in the form of the FV 200 series. The "Universal Tank"  concept was to design a vehicle that would have a mobility comparable to that of cruiser tanks, but with the armour and firepower of heavy tanks. The FV 200 series designation was adopted and was to serve as a line of vehicles that used the same hull and chassis in different roles like armour recovery vehicles and self-propelled guns. The first tank of this series was to be the FV 201, which would be 55 tons and use the 20-pounder gun.
 +
 
 +
In 1949, a new requirement for the project called for the use of a 120 mm gun, possibly in response to the reveal of the Soviet [[IS-3]] heavy tank in the Berlin Victory Parade in 1945. This new requirement would delay the initial deadlines for the tank as no gun of that caliber had been developed yet. As a interim development before such a gun could be made, the FV 201 hull was mounted with a turret from the Centurion tank and this created the ''[[FV 221 Caernarvon]]'', with ''Mark I'' for a 17-pounder armament and a ''Mark II'' for a 20-pounder armament. However, the success of the lighter Centurion tank made the Caernarvon unsuitable in a "Main Battle Tank" role. Further development on the Caernarvon, with emphasis on the armour and armament, would develop the '''FV 214 Conqueror''' tanks, some were straight up conversions of Caernarvon Mark II's. About 185 Conquerors were produced in Mk.1 and Mk.2 variants from 1955 to 1959.
 +
 
 +
===Design===
 +
The FV 214 Conqueror, also known as the "Tank, Heavy No. 1, 120 mm Gun, Conqueror", was intended to provide a mobile, long-range anti-tank support for the lighter and more numerous Centurion tanks stationed in Germany. As a response to the heavy [[IS-3]] tank in Soviet service, the tank's armament and armour is taken up and beyond extreme to typical NATO armour development. The armour, with a frontal plate of about seven inches (178 mm), made the tank one of the most protected tanks stationed in West Germany. The abundance of armour made the tank heavy, weighing 64 tons, and this impeded the tank's top speed and made it mechanically unreliable. However, the tank was very mobile in cross-country terrain, seen as equal as the lighter and faster Centurion tank.
 +
 
 +
The gun was the very large 120 mm cannon, the largest caliber tank gun available when it was introduced. The gun was American-developed, the same 120 mm cannon that would arm the [[120_mm Gun Tank M103|M103]] heavy tank. The gun uses a two-piece ammunition and the tank allowed for a ammo stowage of 35 rounds. Another notable feature of the Conqueror aside from its large cannon and thick armour was the unique and rotatable commander's cupola. In the cupola was the Conqueror's fire control system and had many features that made it ahead of its time. Being able to be rotated independent from the turret, plus with a coincidence rangefinder, the commander could align the cupola to a target, measure its range, and direct the gunner to the designated target. While the gunner located and engage the target, the commander could go and find a different target to designate and range.
 +
 
 +
===Usage===
 +
The Conqueror were all stationed in West German in the armoured regiments stationed there. Each regiment received 9 Conquerors and were organized in groups of three as tank troops to support the Centurions in any conflict that arise from the tense situation of the Cold War. As history played out, the Cold War never became "hot" and no hostile conflicts arise in the borders of Germany, thus the Conquerors never saw any use aside from training as they were all exclusively stationed on the German borders. The Conqueror's intention to provide a long-range anti-tank capability for the Centurions, became less significant when the Centurions began to arm themselves with the more powerful 105 mm L7 gun, such as the [[Centurion Mk.10]]. The lower tactical value of the Conqueror and further development on heavy tanks in Britain had the Conquerors replaced in 1966 with the much more powerful and armoured, yet lighter,  [[Chieftain Mk.3|FV 4201 Chieftain tank]].
  
 
== Media ==
 
== Media ==
Line 42: Line 269:
  
 
== Read also ==
 
== Read also ==
−
''Links to the articles on the War Thunder Wiki that you think will be useful for the reader, for example,''
+
* [https://warthunder.com/en/devblog/current/850/ [Devblog<nowiki>]</nowiki> Сenturion Mk III and Conqueror Mk II]
−
* ''reference to the series of the vehicles;''
+
* [http://warthunder.com/en/devblog/current/870 [Devblog<nowiki>]</nowiki> Conqueror Armor Investigation]
−
* ''links to approximate analogues of other nations and research trees.''
 
−
''ETC.''
 
  
 
== Sources ==
 
== Sources ==
Line 51: Line 276:
 
* ''topic on the official game forum;''
 
* ''topic on the official game forum;''
 
* ''other literature.''
 
* ''other literature.''
 +
 +
{{Britain heavy tanks}}

Revision as of 17:24, 25 November 2018

RANK 6 BRITAIN
Rooikat 105 PACK
Conqueror
uk_conqueror_mk_2.png
Conqueror
Britain flag.png Britain
V Rank
Battle rating:
AB RB SB
7.7 7.7 7.7
Class:
Research:48 000 Specs-Card-Exp.png
Purchase:270 000 Specs-Card-Lion.png
Show in game

Description

GarageImage Conqueror.jpg


The Tank Heavy Gun Conqueror Mk.2 is a Rank V British heavy tank with a battle rating of 7.7 (AB/SB) and 7.3 (RB). It was released along with the initial British tree line in Update 1.55 "Royal Armour". Meant to defeat the Soviet IS-3, the Conqueror gives the British tree line an emphasis in armour and firepower, with a 120 mm gun able to contest the Rank V competitors.

The Conqueror shares the same hull as the Caernarvon, but features a completely new turret armed with the Ordnance QF 120 mm L1A1 gun. The turret is significantly better armoured than the Centurion turret used by the Caernarvon. In a hull-down position where the weak lower front plate is hidden, it can be a very difficult vehicle to destroy from the front. Unfortunately, the side and rear hull armour is very weak, although it is covered by a lot of spaced armour. Flanking the Conqueror usually results in its swift destruction.

The 120 mm gun used by the Conqueror is essentially a version of the American 120 mm Gun M58 used by the M103 heavy tank. Unfortunately, the British version does not have access to the extremely lethal American solid shot AP or HEAT ammunition. The Conqueror is thus forced to choose between the anaemic APDS or unreliable HESH ammunition, while also sharing the same long reload as the American gun.

In general, the APDS is quite accurate at long ranges thanks to its high velocity, and the high penetration usually means it will not have too many problems penetrating most things the Conqueror will encounter. However, the post-penetration effects of APDS tend to be very poor compared to full-bore AP, and it is very rare to one-shot opponents. This problem is further exacerbated by the Conqueror's long reload, which is longer than the time it takes to replace a crewmember if facing a opponent with good crew skills. The HESH round will do a lot of damage if it hits and penetrates, but is easily frustrated by spaced armour and external components like tracks or suspension elements. It also has a relatively low velocity and is harder to use at long ranges.

The mobility of the Conqueror is fair enough for a 65 t heavy tank, and is comparable to the Centurion.

General info

Survivability and armour

Armour type:

  • Rolled homogeneous armour
  • Cast homogeneous armour (Turret)
  • Structural steel (Side skirts)
Armour Front Sides Rear Roof
Hull 130 mm (60°) Front glacis
76.2 mm (44°) Lower glacis 		50.8 + 4 mm 38 mm Top
20 mm (61°) Bottom 		44 mm Front
17 mm Crew hatches
17 mm Rear
Turret 152-313 mm (0-68°) Turret front
140-200 mm (0-78°) Gun mantlet 		89-313 mm (1-48°) 50 mm (1-34°) 50.8 mm
31 mm Square area near gun
Armour Front Rear Roof
Cupola 203 mm (0-17°) 70 mm (12-14°) 50.8 mm
17 mm Crew hatches

Notes:

  • Suspension wheels and bogies are 20 mm thick while tracks are 30 mm thick.
  • Front of turret vary in armour thickness, from 152 mm to 313 mm, but it is all very sloped due to turret design.
  • The front of the turret roof has an additional armour plate of 31 mm in thickness.

Mobility

Mobility characteristic
Weight (tons) Add-on Armour
weight (tons) 		Max speed (km/h)
66.0 1.1 37 (AB)
34 (RB/SB)
Engine power (horsepower)
Mode Stock Upgraded
Arcade 1,046 ____
Realistic/Simulator 716 810
Power-to-weight ratio (hp/ton)
Mode Stock Upgraded
Arcade 15.85 __.__
Realistic/Simulator 10.85 12.27

Armaments

Main armament

Main article: L1A2 (120 mm)
120 mm L1A2
Capacity Vertical
guidance 		Horizontal
guidance 		Stabilizer
35 -7°/+15° ±180° Two-plane
Turret rotation speed (°/s)
Mode Stock Upgraded Prior + Full crew Prior + Expert qualif. Prior + Ace qualif.
Arcade 9.7 __.__ __.__ __.__ __.__
Realistic 9.7 __.__ __.__ __.__ __.__
Reloading rate (seconds)
Stock Prior + Full crew Prior + Expert qualif. Prior + Ace qualif.
19.4 __.__ __.__ __.__
Ammunition
Penetration statistics
Ammunition Type of
warhead 		Penetration in mm @ 90°
10m 100m 500m 1000m 1500m 2000m
Shot L1G APDS 362 361 359 354 339 321
Shell L1TK HESH 152 152 152 152 152 152
Shell details
Ammunition Type of
warhead 		Velocity
in m/s 		Projectile
Mass in kg 		Fuse delay

in m:

Fuse sensitivity

in mm:

Explosive Mass in g
(TNT equivalent): 		Normalization At 30°
from horizontal: 		Ricochet:
0% 50% 100%
Shot L1G APDS 1493 7.6 N/A N/A N/A +1.5° 75° 78° 80°
Shell L1TK HESH 792 16 0.4 0.1 3,100 +0° 73° 77° 80°
Ammo racks
Ammo racks of the Conqueror Mk.2.
Full
ammo 		1st
rack empty 		2nd
rack empty 		3rd
rack empty 		4th
rack empty 		5th
rack empty 		6th
rack empty 		Recommendations Visual
discrepancy
35 31 (+4) 21 (+14) 16 (+19) 11 (+24) 6 (+29) 1 (+34) No

Keep ammo at around 16 (+19) or 11 (+24)

Machine guns

Main article: L3A1 (7.62 mm)
7.62 mm L3A1
Coaxial mount
Capacity (Belt capacity) Fire rate
(shots/minute) 		Vertical
guidance 		Horizontal
guidance
3,750 (250) 500 N/A N/A
Pintle mount
Capacity (Belt capacity) Fire rate
(shots/minute) 		Vertical
guidance 		Horizontal
guidance
3,750 (250) 500 -10°/+30° ±90°

Usage in the battles

The Conqueror performs best at longer ranges as a support tank where it can make the best use of its accurate, high-penetration 120 mm gun as well as its and heavy frontal armour, especially in terrain that allows it to go hull-down.

Modules

As per usual,"Parts" and "FPE" should be the focus first for modifications to increase combat survivability. Everything else is fair game after you get those two.

It is then recommended to head for the "Additional Ballistic Protection Package" in order to increase the armour of the Conqueror to stand up to more lethal rounds.

Pros and cons

Pros:

  • 361 mm stock penetration with the high-velocity APDS.
  • Accurate at long ranges.
  • Turret is well armoured and well shaped to deflect rounds.
  • HESH ammunition with good explosive filler,
  • Extremely sloped and well-armoured upper glacis
  • Both APDS and HESH ammunition rarely ricochet off tanks.
  • The coaxial MG can be used as a ranging gun, its bullets land where the HESH shell will approximately hit.
  • Now has add on armour, which offers more protection to the sides and front.

Cons:

  • Poor lethality with APDS.
  • Unreliable HESH ammunition that is harder to aim due to lower velocity.
  • Long reload time.
  • Very weak side hull armour.
  • Only four crew members (crew can be easily knocked out).
  • Top speed is subpar (33 km/h).
  • Poor acceleration.
  • Weak lower glacis plate.

History

Development

In 1944, General Staff started a project called A45 Infantry Support Tank, which started around the same time as the development of the A41 Centurion cruiser tank. This project, after the war, was redesignated from a typical "Infantry Tank" and instead focused on a new role of a "Universal Tank" design in the form of the FV 200 series. The "Universal Tank" concept was to design a vehicle that would have a mobility comparable to that of cruiser tanks, but with the armour and firepower of heavy tanks. The FV 200 series designation was adopted and was to serve as a line of vehicles that used the same hull and chassis in different roles like armour recovery vehicles and self-propelled guns. The first tank of this series was to be the FV 201, which would be 55 tons and use the 20-pounder gun.

In 1949, a new requirement for the project called for the use of a 120 mm gun, possibly in response to the reveal of the Soviet IS-3 heavy tank in the Berlin Victory Parade in 1945. This new requirement would delay the initial deadlines for the tank as no gun of that caliber had been developed yet. As a interim development before such a gun could be made, the FV 201 hull was mounted with a turret from the Centurion tank and this created the FV 221 Caernarvon, with Mark I for a 17-pounder armament and a Mark II for a 20-pounder armament. However, the success of the lighter Centurion tank made the Caernarvon unsuitable in a "Main Battle Tank" role. Further development on the Caernarvon, with emphasis on the armour and armament, would develop the FV 214 Conqueror tanks, some were straight up conversions of Caernarvon Mark II's. About 185 Conquerors were produced in Mk.1 and Mk.2 variants from 1955 to 1959.

Design

The FV 214 Conqueror, also known as the "Tank, Heavy No. 1, 120 mm Gun, Conqueror", was intended to provide a mobile, long-range anti-tank support for the lighter and more numerous Centurion tanks stationed in Germany. As a response to the heavy IS-3 tank in Soviet service, the tank's armament and armour is taken up and beyond extreme to typical NATO armour development. The armour, with a frontal plate of about seven inches (178 mm), made the tank one of the most protected tanks stationed in West Germany. The abundance of armour made the tank heavy, weighing 64 tons, and this impeded the tank's top speed and made it mechanically unreliable. However, the tank was very mobile in cross-country terrain, seen as equal as the lighter and faster Centurion tank.

The gun was the very large 120 mm cannon, the largest caliber tank gun available when it was introduced. The gun was American-developed, the same 120 mm cannon that would arm the M103 heavy tank. The gun uses a two-piece ammunition and the tank allowed for a ammo stowage of 35 rounds. Another notable feature of the Conqueror aside from its large cannon and thick armour was the unique and rotatable commander's cupola. In the cupola was the Conqueror's fire control system and had many features that made it ahead of its time. Being able to be rotated independent from the turret, plus with a coincidence rangefinder, the commander could align the cupola to a target, measure its range, and direct the gunner to the designated target. While the gunner located and engage the target, the commander could go and find a different target to designate and range.

Usage

The Conqueror were all stationed in West German in the armoured regiments stationed there. Each regiment received 9 Conquerors and were organized in groups of three as tank troops to support the Centurions in any conflict that arise from the tense situation of the Cold War. As history played out, the Cold War never became "hot" and no hostile conflicts arise in the borders of Germany, thus the Conquerors never saw any use aside from training as they were all exclusively stationed on the German borders. The Conqueror's intention to provide a long-range anti-tank capability for the Centurions, became less significant when the Centurions began to arm themselves with the more powerful 105 mm L7 gun, such as the Centurion Mk.10. The lower tactical value of the Conqueror and further development on heavy tanks in Britain had the Conquerors replaced in 1966 with the much more powerful and armoured, yet lighter, FV 4201 Chieftain tank.

Media

An excellent addition to the article will be video guides, as well as screenshots from the game and photos.

Read also

Sources

Paste links to sources and external resources, such as:

  • topic on the official game forum;
  • other literature.


Britain heavy tanks
Matilda  Matilda III · Matilda Hedgehog
Churchill  Churchill I · Churchill III · Churchill VII · Churchill Crocodile · Churchill NA75 · Black Prince
Post-war  Caernarvon · Conqueror
Other  Independent · Excelsior · TOG II

Retrieved from "https://wiki.warthunder.com/index.php?title=Conqueror&oldid=9117"